共查询到4条相似文献，搜索用时 2 毫秒
1.
《防务技术》2020,16(3):689-694
Aluminium composites are inevitable in ship building, commercial and defence aircrafts construction due to their light weight, high strength to weight ratio, admirable properties and cost affordability. In this study, the microstructural characteristics of explosive cladded dissimilar grade aluminium (Al 1100-A1 5052) clad composites reinforced with silicon carbide (SiC) particles is presented. Microstructure taken at the interface by optical and scanning electron microscopes (SEM) revealed the formation of a silicon carbide layer between the dissimilar grade aluminium sheets. Though reaction layers were witnessed at few locations along the interface, the diffusion of atoms between the participant metals is not visible as confirmed by energy dispersive spectroscopy, elemental mapping, line analysis and X-ray diffraction (XRD). The variation in microhardness at various regions of the silicon carbide reinforced dissimilar aluminium explosive clad is reported. The increase in tensile strength of the SiC laced clad is also presented. 相似文献
2.
《防务技术》2014,10(1):22-27
Ni–Al alloy coatings with different Y additions are prepared on 45# medium steel by laser cladding. The influence of Y contents on the microstructure and properties of Ni–Al alloy coatings is investigated using X-ray diffraction, scanning electron microscopy, electron probe microanalyzer, Vickers hardness tester, friction wear testing machine, and thermal analyzer. The results show that the cladding layers are mainly composed of NiAl dendrites, and the dendrites are gradually refined with the increase in Y additions. The purification effect of Y can effectively prevent Al2O3 oxide from forming. However, when the atomic percent of Y addition exceeds 1.5%, the extra Y addition will react with O to form Y2O3 oxide, even to form Al5Y3O12 oxide, depending on the amount of Y added. The Y addition in a range of 1.5–3.5 at.% reduces the hardness and anti-attrition of cladding layer, but improves obviously its wear and oxidation resistances. 相似文献
3.
激光熔覆过程中产生的残余应力与应变对熔覆层的裂纹开裂倾向有重要影响。利用有限元法对激光多道搭接过程熔覆层的残余应力和应变进行计算,计算过程中主要考虑瞬时温度变化引起的热应力、σ-ε曲线、有限元网格、力学边界条件4个方面。热应力主要在温度场计算结果的基础上求得;σ-ε曲线采用的是线性强化材料的弹塑性曲线;有限元网格主要采用分区划分的形式进行。通过计算,得到了搭接后的熔覆层上关键点的残余应力和应变分别为1 400 MPa和2.2×10^-2。结果表明：搭接熔覆层交界处的点产生焊趾裂纹的倾向最大,第1道熔覆顶点处产生横向裂纹的倾向次之。 相似文献
4.
Explosive welding technique is widely used in many industries. This technique is useful to weld different kinds of metal alloys that are not easily welded by any other welding methods. Interlayer plays an important role to improve the welding quality and control energy loss during the collision process. In this paper, the Ti6Al4V plate was welded with a copper plate in the presence of a commercially pure titanium interlayer. Microstructure details of welded composite plate were observed through optical and scanning electron microscope. Interlayer-base plate interface morphology showed a wavy structure with solid melted regions inside the vortices. Moreover, the energy dispersive spectroscopy analysis in the interlayer-base interface reveals that there are some identified regions of different kinds of chemical equilibrium phases of Cu–Ti, i.e. CuTi, Cu2Ti, CuTi2, Cu4Ti, etc. To study the mechanical properties of composite plates, mechanical tests were conducted, including the tensile test, bending test, shear test and Vickers hardness test. Numerical simulation of explosive welding process was performed with coupled Smooth Particle Hydrodynamic method, Euler and Arbitrary Lagrangian-Eulerian method. The multi-physics process of explosive welding, including detonation, jetting and interface morphology, was observed with simulation. Moreover, simulated plastic strain, temperature and pressure profiles were analysed to understand the welding conditions. Simulated results show that the interlayer base plate interface was created due to the high plastic deformation and localized melting of the parent plates. At the collision point, both alloys behave like fluids, resulting in the formation of a wavy morphology with vortices, which is in good agreement with the experimental results. 相似文献