Risk preference,multiple attributes,and multiple criteria in bayesian acceptance sampling plans

Although there has been considerable research directed toward developing Bayesian acceptance sampling plans, little consideration has been given to incorporating a decision-maker's risk attitude or treating such problems in terms of multiple-type defects and multiple criteria. We review our own work which is focused on the above issues. A model incorporating risk preference is shown to yield substantial differences in the characteristics of an optimal sampling plan relative to a typical Bayesian linear cost (risk neutral) model. Bayesian models and optimization schemes for a variety of multiple-type defect plans are reviewed. A bicriterion acceptance model, employing average outgoing quality and average inspection cost is also formulated. Traditional versus interactive optimization procedures are compared empirically in terms of ease of use, satisfaction with solutions, and insight gained into the problem.     

Some experiences using MIL-STD-105 in the united states air force

The historical and, to some extent, the current role of attribute inspection sampling in the United States Air Force is described. Some insight into consideration culminating in revisions made to the original MIL-STD-105 sampling plans is provided. These revisions were motivated from a practitioner's perspective rather than that of a statistical expert. Some significant administrative applications within the Air Force are described, and a practical method, based on the total amount of inspection, is given for distinguishing between sampling plans that have a fixed risk level (i.e., common value on the OC curves).     

Design of sequential sampling inspection plans with screening based on minimal lattice paths

In this article we propose new sequential sampling inspection plans with screening indexed by LTPD and AOQL, in which the alternative of accepting or rejecting a lot is decided by the results of sequential sampling plans, based on the minimal lattice paths. It is illustrated that the average total inspection can be economized by using both of the proposed sequential sampling inspection plans, with screening indexed by LTPD and AOQL, respectively. © 1994 John Wiley & Sons, Inc.     

Sequential and systematic sampling plans for the Markov‐dependent production process

Acceptance sampling plans are used to assess the quality of an ongoing production process, in addition to the lot acceptance. In this paper, we consider sampling inspection plans for monitoring the Markov‐dependent production process. We construct sequential plans that satisfy the usual probability requirements at acceptable quality level and rejectable quality level and, in addition, possess the minimum average sample number under semicurtailed inspection. As these plans result in large sample sizes, especially when the serial correlation is high, we suggest new plans called “systematic sampling plans.” The minimum average sample number systematic plans that satisfy the probability requirements are constructed. Our algorithm uses some simple recurrence relations to compute the required acceptance probabilities. The optimal systematic plans require much smaller sample sizes and acceptance numbers, compared to the sequential plans. However, they need larger production runs to make a decision. Tables for choosing appropriate sequential and systematic plans are provided. The problem of selecting the best systematic sampling plan is also addressed. The operating characteristic curves of some of the sequential and the systematic plans are compared, and are observed to be almost identical. © 2001 John Wiley & Sons, Inc. Naval Research Logistics 48: 451–467, 2001     

计数序贯抽样检验方案的OC函数和ASN

根据序贯概率比检验的理论,给出计数序贯抽样检验方案的设计原理,得到国家标准GB／T8051—2008中计数序贯抽样检验方案的OC函数和ASN的计算方法。     

The effect of nonnormality on variables sampling plans

Acceptance sampling plans based on variables have been in use for many years. Recently, there has been a renewal of interest in these plans, because of the relative efficiencies that they offer with respect to attributes sampling regarding sample size. Furthermore, in situations where acceptable quality levels are very small, and a high level of protection is desired, variables sampling is often much more efficient than attributes sampling. An important disadvantage of variables sampling is that the distribution of the parameter being inspected must be known. Most standard variables sampling plans assume that the distribution of this parameter is normal. This article examines the effect of the normality assumption in variables sampling. Methods to detect departures from normality are reviewed.     

On the use of standard tables to obtain Dodge-Romig LTPD sampling inspection plans

Procedures are described which yield single and double sample Dodge-Romig [1] lot tolerance percent defective (LTPD) rectifying inspection plans. For the determination of such plans only a desk calculator and standard tables of the discrete probability distributions are required. Some advantages gained by using these procedures rather than the Dodge-Romig table include: (a) The Consumer's Risk is not limited to 0.10. (b) More choices of LTPD are available. (c) Smaller average total inspection is achieved by using a plan designed for specific “process average” and lot size rather than a compromise plan designed to cover intervals on these two parameters.     

Qmp/USP: A modern alternative to MIL-STD-105D

The Quality Measurement Plan (QMP) and the Universal Sampling Plan (USP) are the data analysis and sampling plans for the AT&T Technologies quality audit. This article describes QMP/USP, an acceptance sampling plan based on QMP and USP principles. QMPIUSP is a complete acceptance sampling system. It combines the elements of classical rectification inspection plans with those of MIL-STD-IOSD. There is no switching between plans, no tables of numbers to look through, and no discontinue state. QMP/USP is a computerized, self-contained system that features:

• Acceptance decisions based on the QMP Bayes empirical Bayes analysis of current and past sampling result
• Sample size selection based on USP, i.e., lot size, AQL, a cost ratio, the QMP analysis, and a budget constraint
• Guaranteed AOQ
• A complete statistical analysis of the quality process.

In this article, we describe the operation of QMP/USP and compare its performance with that of MIL-STD-IOSD. The comparison is made under many different quality environments with many metrics. Our results show that QMP/USP and MIL/STD/IOSD perform similarly for the environments where quality could be described as “in control”; and that QMPlUSP is superior in the environments where quality is “out of control”.     

A backward recursive technique for optimal sequential sampling plans

This paper presents a procedure akin to dynamic programming for designing optimal acceptance sampling plans for item-by-item inspection. Using a Bayesian procedure, a prior distribution is specified, and a suitable cost model is employed depicting the cost of sampling, accepting or rejecting the lot. An algorithm is supplied which is digital computer oriented.     

Joint determination of optimum variable and attribute target means

This article considers the problem of joint control of attribute and variable quality characteristics of a given product. Items are acceptable if they meet the specifications for both types of quality characteristics at the same time. Otherwise, the items are sold as scrap at reduced prices. The objective is to determine simultaneously the target values for each characteristic so as to maximize the expected profit per item. Several item-by-item quality-inspection plans are formulated on the basis of various inspection strategies. These strategies are defined in terms of whether the inspection is to be carried out simultaneously for both characteristics, or sequentially, or whether inspection for one of the characteristics is to be ignored. All these plans are shown to differ in terms of their profitability. However, they all yield equivalent quality standards. A numerical example is provided to illustrate the application of these models.     

A cost analysis of sampling inspection under Military Standard 105D

Military Standard 105D has been almost universally adopted by government and private consumers for the lot-by-lot sampling inspection of product which may be inspected on a dichotomoun basis The plan specifies, for each lot size, a random sample size and set of acceptance numbers (maximum allowable number of defectives in each sample). The acceptance numbers are based upon the binomial distribution and depend upon the quality required by the purchaser. Where several consecutive lots are submitted, a shift to less severe (“reduced”) inspection or more severe (“tightened”) inspection is specified when the ongoing quality is very high or low. Further experience permits a return to normal sampling from either of these states This paper examines the long range costs of such a sampling scheme. The three inspection types are considered as three distinct Markov chains, with periodic transitions from chain to chain. The expected sample size and the expected proportion of rejected product are determined as a function of the two parameters under control of the manufacturer, lot size and product quality. Some numerical examples are given which illustrate how to compute the overall cost of sampling inspection. Suggestions are made concerning the choice of parameters to minimize this cost.     

计数抽样检查标准ISO2859、JISZ9015、GB2828放宽检查抽样方案优良性分析

文对ISO2859、JISZ9015和GB2828三个标准的放宽检查抽样方案的OC和ASN曲线进行了全面的计算和分析,重点讨论了上述标准的二次和多次抽样方案的等效性和有效性,并对各标准优良性进行了分析和评价。     

统计抽样方法在外语单词测验中的应用

本文通过分析一般工业产品计数抽样检验方法与外语单词专项测验的特点,发现二者本质相同。利用统计抽样方法不仅可以获得随机样本(试卷),排除某些主观干扰,同时还可以对受试方和考核方风险率进行评价和选择(按四个分级标准,给出了风险率不同的六组测验方案)。此法已为《大学英语词汇系统软件》采用.     

Systems approach to the multistage manufacturing connected-unit situation

This paper investigates the relationships among incoming quality limit (AIQL), manufacturing quality level in each stage of production, and outgoing quality limit (AOQL), for a multistage manufacturing connected-unit situation from the systems cost-effectiveness point of view. An objective function is developed and the formulated problem is solved using discrete optimization technique. The study is restricted to the development of single sampling plans where inspection is by attribute. Lot size and sample size are fixed for incoming and outgoing inspection for each stage of manufacturing.     

Variable sampling plans for normal distribution indexed by Taguchi's loss function

Taguchi has presented an approach to quality improvement in which reduction of deviation from the target value is the guiding principle. In this approach any measured value x of a product characteristic X brings a loss to consumer in general, where the loss is expressed as a quadratic form with respect to the difference between the measured value x and the target value T of a product characteristic. Then, it is natural to reject the lot which may bring a large loss to consumer. This concept induces us to construct new variable sampling plans based on the Taguchi's loss criterion. In this article, a design procedure of the sampling plans for assuring the loss in the Taguchi's method is proposed. Some numerical results based on the proposed design procedures are illustrated. © 1997 John Wiley & Sons, Inc. Naval Research Logistics 44: 591–603 (1997)     

基于调整型的战术导弹批检试验抽样方案设计

为通过批检试验准确检验导弹的质量,提出基于调整型的战术导弹批检试验抽样方案设计思路。调整型抽样检验方法的应用,可适时调整抽样方案的宽严程度,提高检验效率,并为订货方和生产方提供适当的风险保护,把抽样检验和导弹的质量变化联系在一起形成一个动态检验过程。     

A comparison of several attribute sampling plans

The purpose of this research is to examine several types of procedures for attribute sampling inspection-the widely used Military Standard 105D plans [8], the lesser known Double Zero plans as developed by Ellis [4] and the Narrow Limit gaging plans of Ott and Mundel [9]. Each of the procedures is described with an effort made to illuminate their more subtle features. Then the plans are compared, whence it is revealed that (i) Narrow Limit gaging plans have a serious weakness in comparison to the others and (ii) Double Zero plans tend to be essentially conservative, but that sufficiently tight Military Standard 105D plans can be selected to achieve comparable performance in all ways.     

Computational aspects in multistage bayesian acceptance sampling

Simple criteria are found for reducing the computational effort in multistage Bayesian acceptance sampling. Regions of optimality are given for both terminal actions accept and reject. Also, criteria are presented for detecting nonoptimality of sets of sample sizes. Finally, nearly optimal (z,c^?,c⁺)-sampling plans are constructed by restricting attention to a small subset of sample sizes.     

New ANSI versions of MIL-STD-414 and MIL-STD-105D

When acceptance sampling plans are applied to measurement characteristics, a choice between application of a variables or an attributes sampling plan must be made. With the recent revision by the American Society for Quality Control for the American National Standards Institute of the ANSI/ASQC Z1.9 variables system and the ANSI/ASQC Z1.4 attributes system, the standards have now been matched so that it is possible to move between them. This article will discuss exploitation of the resulting synergistic relationship to achieve more rational and more effective acceptance sampling.     

药物效用鉴定的序贯抽样检验方法和条件推导

给出了制定药物效用鉴定的序贯抽样检验方案,对未用的同类药品进行随机抽样,利用抽样结果,对剩下的N-n个样品的性能进行推断,得到判断药品是否失效的抽样方法以及有效的抽样截断方案,在减小抽样量的前提下,准确的判断药物是否有效.并对该序贯抽样性能的优劣与固定样本最优检验方法进行了比较,得到在犯同样错误的前提下,序贯抽样检验的样本量比固定样本最优检验的样本量小的多.