共查询到16条相似文献,搜索用时 78 毫秒
1.
身管柔性化对火炮动力后坐试验的影响研究 总被引:1,自引:0,他引:1
为研究火炮动力后坐试验过程中身管变形对火炮后坐复进运动的影响,以某自行火炮火力部分作为研究对象,基于多体动力学和有限元方法,构建了考虑身管柔性化的火力部分刚柔耦合动力学模型。该模型中,炮膛合力以样条函数的形式直接作用在炮口前端。通过仿真,对比火炮后坐部分最大后坐速度、最大后坐位移以及最大后坐速度时的后坐位移和时间的仿真值与实弹射击过程中的试验值,结果表明,采用冲击的方式进行火炮后坐模拟试验时,身管柔性特征对火炮后坐复进特性影响较小,也证明冲击式火炮后坐试验装置的研制可行性。 相似文献
2.
传统身管疲劳寿命评定采用实弹射击和实验室液压疲劳试验相结合的方法进行,未充分考虑火炮发射时动态载荷对身管的冲击疲劳作用.为此,研制了身管冲击液压疲劳试验装置,为揭示身管冲击疲劳规律提供了新手段.依托该装置,在实验室条件下再现了身管胀膛和膛炸现象.试验结果表明:在冲击载荷作用下,身管壁内主裂纹逐渐形成并沿径向扩展,造成身... 相似文献
3.
4.
建立火炮在阳光照射下身管上下表面温度场、热弯曲及炮口角的计算模型。以某大口径长身管火炮为实例,计算该炮的炮口弯曲量与炮口角,进行自然阳光照射与环境模拟条件下的热弯曲试验,验证计算模型与计算结果的正确性与可信性;提出通过测量身管上下表面温度快速求取火炮身管不同环境温度及温差下的弯曲量与炮口角的工程应用方法。 相似文献
5.
运用有限元方法计算出身管在自重作用下不同射角时炮口端的弯曲度,得出炮口角随射角的变化关系,分析身管自重弯曲对火炮射击精度的影响,并建立身管弯曲的修正模型。证明身管的自重弯曲是影响射击精度的不可忽略的因素,提出了一种计算弯曲度和修正射击的方法。 相似文献
6.
7.
舰炮的炮口扰动是影响舰炮射击精度的重要因素。为了减少舰炮的炮口扰动,优化身管结构,建立了柔性身管的ABAQUS有限元模型,将有限元模型的模态计算值与模态试验值进行比较,发现建立的柔性身管有限元模型是合理可行的。提出了混沌量子粒子群算法与动力学联合优化的方法,进行身管和炮口的多目标优化。优化结果表明,优化后炮口中心的线速度、角速度和角位移与优化前相比显著减小,身管质量有所降低,结构更加合理,该优化方法有效可行,为下一步全炮总体优化设计提供了一定的借鉴。 相似文献
8.
舰炮的炮口扰动是影响舰炮射击精度的重要因素。为了减少舰炮的炮口扰动,优化身管结构,建立了柔性身管的有限元模型并将该模型的模态计算结果与模态试验测试值进行对比,证明建立的柔性身管有限元模型是有效的。提出了混沌量子粒子群算法与动力学联合优化的方法,进行身管和炮口的多目标优化,优化结果表明:优化后的炮口中心的线速度、角速度和角位移与优化前相比显著减小,身管质量有所降低,结构更加合理,该优化方法有效可行,为下一步全炮总体优化设计提供了一定的借鉴。 相似文献
9.
10.
11.
建立高射机枪有限元模型的目的在于对其进行动力特性分析和求解动力响应,并作为自动武器动力学仿真的重要组成部分。针对某型高射机枪建立有限元改进模型,建模中,把枪身、托架等简化为空间梁系,下架采用三维等参元模拟,并采用主从自由度法处理了三维元与梁元的联结问题,通过与传统粱单元模型的对比分析,说明改进模型具有较好的精度。 相似文献
12.
针对高膛压坦克炮身管剩余寿命预测的难题,结合坦克实弹射击试验数据量少和非线性的特点,基于最小二乘支持向量机构建了坦克炮身管剩余寿命预测模型,给出了模型参数的选取方法,并以某型坦克炮射击试验为基础,对坦克炮身管剩余寿命预测模型进行了验证。结果表明:该模型预测坦克炮身管剩余寿命效果良好。 相似文献
13.
运用自由界面模态综合法将自行地地分为炮身、摇架、高低机、平衡机、炮框、炮塔、车体等子结构.依据频率准则,由有限元法求得各个子结构的分支模态,由整体自由度缩减的动力方程求得全地的动态特性.运用该方法使整体动力方程的阶数大为降低,且保证了求解结果的精度. 相似文献
14.
《防务技术》2019,15(5):690-697
Influence of multiple structural parameters on the performance of a gun launch system driven by high-pressure reactive gases is important for structural design and performance adjustment. A coupled lumped parameter model was utilized to predict the propellant combustion, and a dynamic finite element method was applied to approximate the mechanical interactions between the projectile and the barrel. The combustion and the mechanical interactions were coupled through a user subroutine interface in ABAQUS. The correctness and the capability of the finite element approximations in capturing small structural changes were validated by comparing predicted resistance with experiments. Based on the coupled model, the influence of structural parameters of a medium-caliber gun on the system performance was investigated. In order to reduce the research costs, orthogonal tests were designed to investigate the comprehensive effects of the parameters. According to statistical analysis, the important order of the structural parameters on the launching process was obtained. The results indicate that the influence of the width of the rotating band stands out among the studied parameters in the gun. The work provides a method to investigate the influence of multiple parameters on system performance and gives guidance for controlling the system performance. 相似文献
15.
16.
The Cr-plated coating inside a gun barrel can effectively improve the barrel's erosion resistance and thus increase the service life.However,due to the cyclic thermal load caused by high-temperature gun-powder,micro-element damage tends to occur within the Cr coating/steel substrate interface,leading to a gradual deterioration in macro-mechanical properties for the material in the related region.In order to mimic this cyclic thermal load and,thereby,study the thermal erosion behavior of the Cr coating on the barrel's inner wall,a laser emitter is utilized in the current study.With the help of in-situ tensile test and finite element simulation results,a shear stress distribution law of the Cr coating/steel substrate and a change law of the interface ultimate shear strength are identified.Studies have shown that the Cr coating/steel substrate interface's ultimate shear strength has a significant weakening effect due to increasing temperature.In this study,the interfacial ultimate shear strength decreases from 2.57 GPa(no erosion)to 1.02 GPa(laser power is 160 W).The data from this experiment is employed to establish a Cr coating/steel substrate interface shear damage model.And this model is used to predict the flaking process of Cr coating by finite element method.The simulation results show that the increase of coating crack spacing and coating thickness will increase the service life of gun barrel. 相似文献