基于随机拟合的悬浮式深弹弹阵特征建模

通过分析悬浮式深弹发射后在空中的弹道特性,建立了深弹弹着点坐标的计算模型。采取蒙特卡洛方法,分别对舰艇六自由度状态下,单管和六联装火箭深弹的弹着点坐标进行了仿真计算,对弹着点的分布规律进行了研究,并得出弹着点的联合密度函数。结果表明,在发射参数存在正态扰动下,弹着点散布区域均呈椭圆形分布,弹着点坐标均仍服从正态分布。     

悬浮式深弹的射弹散布模型及其精度分析

通过建立悬浮式深弹射弹散布中心的数学模型,分析了射角在一定范围内服从正态分布时弹着点的概率分布情况。采用对弹着点的散布误差和偏弹性进行穷举仿真的方法,分析了弹着散布误差与射角及射角误差的对应规律,给出航向和正横方向上误差较小时的射角分布;分析了弹着点偏弹性与射角的对应规律,并指出射角误差应引起充分重视的射角范围。最后,以某射角为例对射弹散布进行了仿真、对比、印证,并对结论的应用提出了建议。     

舰炮一维弹道修正弹射击误差分离和校正研究

由于工作原理不同,传统无控弹射击校正方法不适用于一维弹道修正弹。分析了舰炮使用一维弹道修正弹射击误差构成和射击观测特点,提出一维弹道修正弹射击校正新方法,首先通过修正机构不工作,利用观测弹着点相对预测弹着点偏差平均值校正火控设备预测弹着点误差;然后利用修正弹正常工作时观测弹着点相对目标（或提前点）偏差平均值校正修正机构误差。假设各误差值,通过解弹道方程仿真计算表明,按新方法射击校正能够显著提高射击精度。     

火箭深弹使用编码声非触发引信作战效能研究

针对深弹传统引信存在的问题,对深弹武器的特点及深弹引信的使用现状进行了分析,建立了传统引信与非触发引信射击效能计算模型,进行了仿真计算和分析,计算结果表明采用声非触发引信可大大提高火箭深弹作战效能,对编码声非触发深弹引信的研制以及新型深弹武器系统的发展具有重要参考意义.     

火箭悬浮深弹拦截尾流自导鱼雷研究

为了分析了水面舰艇发射火箭悬浮深弹拦截潜射尾流自导鱼雷的作战使用问题,首先,概括了潜射尾流自导鱼雷的攻击原理。其次,介绍了水面舰艇针对尾流自导鱼雷的弹道预测原理以及鱼雷提前角估算数学模型,在此基础上,进一步建立了火箭悬浮深弹拦截鱼雷的射击要素求解模型。最后,进行了仿真检验,归纳了火箭悬浮深弹射击提前角随相关参数变化的分布规律。研究结果对火箭悬浮深弹拦截潜射尾流自导鱼雷的作战使用具有指导意义。     

利用火箭深弹系统拦截鱼雷的技术改进方法探析

多功能、多用途是火箭深弹系统的主要发展方向之一。根据水面舰艇武器装备的实际,仅从拦截潜艇发射的鱼雷角度出发,对舰载火箭深弹系统拦截来袭鱼雷的可行性进行了分析。在此基础上,探讨了利用火箭深弹系统拦截鱼雷的系统选择、深弹战斗部的开发、引信选型、发射管安装及配置、火控系统的改进等关键问题,并提出了一些具体的改进方法。     

空中垂直烟幕防激光制导航弹水平轰炸计算模式研究

研究了空中垂直烟幕防激光制导航弹水平轰炸的计算原理和方法,给出了防激光制导航弹水平轰炸烟幕的烟墙尺寸、烟弹发射距离、发射高度、发射时机、烟弹消耗量等烟幕使用诸元的计算方法。     

基于0-1规划的弹种决策与发射时序优化

对于身管发射武器系统,同一发射单元使用不同弹种完成作战任务时,需要确立合适的弹种决策与最佳的发射时机.提出用O-1变量来描述弹种决策变量.通过时弹种发射机制及武器系统控制特点进行分析,构造多种0-1变量用以描述武器系统作战时序之间的约束关系,建立了弹种发射时序的0-1规划模型,并用LINGO软件实现了0-1规划的求解.给出了典型应用实例,进行了仿真计算,结果表明,该方法简单可行.     

舰炮发射增程弹道修正弹测量弹道坐标转换

为了对增程弹道修正弹进行偏差计算、形成修正指令,需要对测量的一段弹道参数进行辨识,目前的辨识算法都是基于相对地球静止射面坐标系的,但是,舰炮发射修正弹以后舰艇继续机动,跟踪雷达随之运动和摇摆。针对舰艇作战环境的特点,建立了舰炮发射增程弹道修正弹测量弹道坐标到射面坐标系的转换模型,并采用基于弹道方程的滤波方法对转换后的坐标数据进行了仿真。建立的模型可以为舰炮发射修正弹的火控软件研制提供参考。     

航空自导深弹攻潜模型与仿真

针对反潜巡逻机使用磁探仪和自导深弹的攻潜效能研究,提出了一种基于蒙特卡洛法的计算模型。在建立攻潜坐标系的基础上,给出了连投深弹射击深度的定义;结合磁探仪定位原理,提出了基于峰值追踪的定位目标和连投攻击的方法。仿真结果表明,该方法能够提高命中概率。给出了目标分布和连投深弹的散布模型,根据攻潜过程和命中判定条件,进行了攻潜效能的计算,并仿真分析了影响攻潜效能的主要因素,研究了投弹间隔的确定方法。     

基于车载GPS定位的固定目标坐标测量误差分析

通过分析地面移动侦察系统对固定目标进行一次坐标测量时的测量过程,建立了固定目标坐标测量模型。通过对测量过程中误差传递规律的分析,导出了目标坐标测量误差的分布规律。根据坐标测量误差中各组成成分的大小,将测量误差分布规律近似成正态分布,并给出了分布参数的简化计算方法。仿真结果证实了误差分布规律近似及参数计算简化的可行性。     

A numerical study on the disturbance of explosive reactive armors to jet penetration

The disturbance of flat and V-shaped sandwich reactive armor configurations to shaped-charge jet is studied by a numerical approach. The disturbing and cutting effects of the two reactive armor configurations to the jet are successfully captured. The predicted disturbance characteristics and patterns are in fairly good agreement with the X-ray photographic observations. The residual depth of penetration into a semi-infinitive homogeneous steel target behind the reactive armor is computed for a series of jet/armor parameters. For the flat configuration, it is demonstrated that the residual penetration depth is not significantly reduced for a normal impact while it is reduced up to 75% for an oblique impact. In comparison, the V-shaped configuration reduces the penetration depth of the jet to 90%, and it is observed that the penetration depth is not sensitive to the V-shaped angle.     

Investigation of normal,lateral, and oblique impact of microscale projectiles into unidirectional glass/epoxy composites

Spacesuits and spacecraft must endure high velocity impacts from micrometeoroids. This work considers the impact of 100 μm diameter projectiles into composite targets at velocities from 0.5 km/s to 2 km/s. This work begins by presenting an energy-based theoretical model relating depth of penetration (DoP) and impact force to impact velocity, characteristic time, and threshold velocity and force. Next, this work compares numerical simulations of normal impact on composites to the theoretical model. Numerical simulations are conducted with LS-DYNA and the well-known composite model, MAT-162. The numerical models consider unidirectional S2-glass fiber reinforced SC-15 epoxy composite laminates. The numerical model shows good correlation with the theoretical model. The numerical model also investigates lateral impact, parallel to the fiber direction, and oblique impact at angles from 30° to 82.5°. This work decomposes oblique impact into normal and lateral components, and compares them with normal and lateral impact results. The results show good correlation of the normal component of oblique results with the theoretical model. This numerical and theoretical study focuses on DoP, velocity, and penetration resistance force as functions of time. The theoretical model and numerical simulations are used to determine new DoP parameters: characteristic time of depth of penetration and threshold impact velocity. These models are a first step in developing the capability to predict DoP for oblique, microscale, high-speed impact on composite materials.     

航空自导深弹和磁探仪攻潜模型与仿真

针对反潜巡逻机使用磁探仪和自导深弹的攻潜效能研究,提出了一种基于蒙特卡洛法的计算模型。在建立攻潜坐标系的基础上,给出了连投深弹射击深度的定义;结合磁探仪定位原理,提出了基于峰值追踪的定位目标和连投攻击的方法,仿真结果表明该方法能够提高命中概率;给出了目标分布和连投深弹的散布模型,依据攻潜过程和命中判定条件,进行了攻潜效能的计算;仿真分析了影响攻潜效能的主要因素,并研究了投弹间隔的确定方法。     

On maximization of the integral of a bell-shaped function over a symmetric set

Given a target T in Euclidean n-space Rⁿ and a point bomb whose point of impact in Rⁿ is governed by a probability distribution about the aim point a, what choice of a maximizes the probability of a hit v_a(T)? Of course, only in special cases is an exact solution of this problem obtainable. This paper treats targets T which are symmetric about the origin o and demonstrates conditions on the extent of T and the impact density f, a density with respect to Lebesgue measure, sufficient for v_a(T) to be monotone in the distance from a to o and maximized at a = o. The results are applied to various tactical situations.     

鱼雷最大航向估计在反鱼雷中的应用

在悬浮式深弹反鱼雷时,若只能根据声纳兵的经验估计鱼雷距离,如何正确估计鱼雷航向角范围就成为正确布放悬浮式深弹的关键.从直航雷的相遇三角形和尾流鱼雷命中目标条件出发,推导出鱼雷相对舰艇的正常提前角,从而确定鱼雷在被发现点的最大航向角范围,为正确投放悬浮式深弹提供了理论依据.     

A method to determine the shell layout scheme for equipment battlefield damage tests under artillery fire

In this paper,a new method for determining the shell layout scheme is proposed,which can make the equipment damage data by the battlefield damage test resemble as close as possible the actual combat data.This method is based on the analysis of the impact point distribution and effective damage area of equipment.In order to obtain the position of the impact points,an impact point distribution model under artillery fire was established.Similarly,in order to obtain the effective damage area of equipment,the concepts of generalized damage area and task-based equipment functional damage probability were demonstrated,and the corresponding calculation model was established.Through case analysis,the shell layout scheme was effectively obtained,verifying the correctness of the proposed method.     

Lower confidence limits for the impact probability within a circle in the normal case

Lower confidence limits are derived for the impact probability within a circle of fixed radius. The bivariate normal distribution with zero means, unequal variances, and zero correlation is the probability model for impacts. A new representation of the impact probability function is offered. This presentation is valid also for the dependent case, where the eigenvalues of the covariance matrix replace the variances. When the ratio of variances is known the lower confidence limits are uniformly most accurate (UMA). A few alternative approaches are compared by simulation when the ratio of variances is unknown.     

保证率点值区间估计的Monte-Carlo方法

提出了一种根据实测样本系列对保证率点值进行区间估计的Ｍｏｎｔｅ─Ｃａｒｌｏ方法。对于具有正态分布或对数正态分布的样本,首先推出总体参数的分布,然后用Ｍｏｎｔｅ─Ｃａｒｌｏ法生成总体参数系列,据此求得相应的保证率点值系列,最后通过经验分布推得在给定置信度下保证率点值的区间估计,本文还给出了一个算例。