共查询到19条相似文献,搜索用时 109 毫秒
1.
高效、准确获取弹药贮存微环境温度变化规律是开展弹药寿命评估与延寿的关键。结合神经网络算法以及传热学原理,研究了弹药贮存微环境温度预测模型,并基于此模型开发了一套弹药包装箱微环境预测软件,用以预测不同气候环境下包装箱内部的温度变化。在敦煌、漠河进行了相关试验,用以验证软件预测正确性以及参数优化。结果表明:应用基于神经网络算法开发的包装箱微环境预测软件,根据不同包装箱材料,调控贮存地点以及控制贮存起始温度,可以实现对箱内温度的控制。 相似文献
2.
迫击炮是我军团属火炮的重要组成部分,作 为迫击炮弹重要组成的发射装药,直接影响着初速、射程、地面密集度等重要性能,它将对迫弹是否正常发射、飞行和可靠到达预定目标起到关键作用。迫弹发射装药通常由基本药管和附加装药 构成,附加装药结构相对简单、性能比较稳定,而基本药管的结构随着弹药技术的不断升级也日趋 复杂。基本药管设计是否合理,性能是否满足使用要求,主要通过尾管压力值来衡量。到目前为止,国内发射装药研制和生产厂家、研究所、弹药修试站等单位仍然沿用传统的铜柱测压方法,这种方 法只能测出尾管压的一个固定值,实际上,… 相似文献
3.
4.
5.
针对海岛高温、高湿的自然环境,建立了海岛阵地环境下弹药的可靠贮存寿命模型,并以某型号弹药为研究对象,对其试验数据进行了分析,得出了在一定置信度下弹药的贮存寿命。 相似文献
6.
本文针对现阶段弹药贮存可靠性数据不充分和研制阶段贮存可靠性评定比较困难的现状,提出了弹药可靠贮存寿命的4种预计方法,对每种方法的适用场合、实施步骤,特别是对相似产品法在弹药可靠贮存寿命中的应用做了较为详细的介绍。 相似文献
7.
为分析不同发射出口速度、不同发射负载质量对导轨积累热量的影响,建立了导轨温度场模型,计算了导轨各点温度变化过程,并和光纤光栅温度传感器测量结果对比,验证了模型及测量结果的正确性。在此基础上,设计并进行了三种类型实验,分析了在不同发射速度、不同发射负载质量以及相同发射能级不同发射速度下的导轨热量积累差异。该结论为确定连发间隔、导轨冷却设计提供了有效参考。 相似文献
8.
9.
针对蒸汽加热在弹丸装药倒空中存在污染环境、装药适用范围小、能量利用率低等问题,提出了电磁感应加热弹丸装药倒空技术.分析了感应加热倒药方法的工作原理,构建了感应制热器的数学模型,基于磁热顺序耦合方法建立了二维轴对称感应加热弹丸装药有限元模型,开展了电磁场和温度场仿真研究.分析了不同时刻下弹丸装药不同位置的电磁场和温度场分... 相似文献
10.
现代弹药二战结束后,电子技术、光电子技术、火箭技术和新材料等高新技术的发展,成为弹药发展的强大推动力。制导弹药特别是70年代以来各种精确制导弹药的迅速发展和在局部战争中的成功应用,是这个时期弹药发展的一个显著特点。精确制导弹药除了有命中精度很高的各种导弹外,还有制导炸弹、制导炮弹、制导子弹药和有制导的地雷、鱼雷、水雷等,与此同时,其他弹药技术也获得了长足进步。火炮弹药广泛采用增程技术,出现了火箭增程弹、冲压发动机增程弹、底凹弹和底部排气弹等增程炮弹。液体发射药、模块化装药的研制取得重要进展,已经接近实用水平。随着坦克装甲防护 相似文献
11.
12.
网络化巡飞攻击弹药(NLAA)是一种新型的信息化弹药,采用无人机技术、弹药技术和数据通信技术等多项高新技术,是未来弹药领域发展的重要方向.针对网络化巡飞攻击弹药的特点和关键技术,提出了网络化巡飞攻击弹药在鉴定试验中需要开展结构强度、制导精度、数据链测试、安全性和可靠性、毁伤评估以及弹道测试等关键试验技术研究,为网络化巡飞攻击弹药定型试验技术研究提供了方向. 相似文献
13.
对弹药在长期贮存过程中其发射药剩余能量的变化情况进行了研究。首先建立了箱装弹药中发射药放热规律的数学模型 ,然后利用数值模拟的方法计算了其在贮存过程中的剩余能量 ,最后对计算结果进行了分析与讨论 相似文献
14.
15.
蒙占海 《军械工程学院学报》1992,(4)
本文针对目前实行的弹药弹道性能检验中遇到的困难,分析了弹药弹道性能检验中引起弹道性能变化的诸因素,提出了不用标准弹、不用弹道炮进行弹药弹道性能检验的新方法,依此设想,以130mm加农炮0号装药为试验对象进行了试验研究。 相似文献
16.
《防务技术》2020,16(2):362-373
An increase in the use of the gun barrel will cause wear of the inner wall, which reduces the muzzle velocity and the spin rate of the projectile. The off-bore flight attitude and trajectory of the projectile also change, affecting the shooting power and the accuracy. Exterior ballistic data of a high-speed spinning projectile are required to study the performance change. Therefore, based on the barrel's accelerated life test, the whole process of projectile shooting is reproduced using numerical simulation technology, and key information on the ballistic performance change at each shooting stage are acquired. Studies have shown that in the later stages of barrel shooting, the accuracy of shooting has not decreased significantly. However, it is found that the angle of attack of the projectile increases as the wear of the barrel increases. The maximum angle of attack reaches 0.106 rad when the number of shots reaches 4300. Meanwhile, elliptical bullet hole has appeared on the target at this shooting stage. Through combining external ballistic theory with simulation results, the primary reason of this phenomenon is found to be a significant decrease in the muzzle spin rate of the projectile. At the end of the barrel life, the projectile muzzle spin rate is 57.5% lower than that of a barrel without wear. 相似文献
17.
《防务技术》2019,15(3):282-294
In this study, a laminated woven bamboo/woven E glass/unsaturated polyester composite is developed to combat a ballistic impact from bullet under shooting test. The aim of this study is to understand the fundamental effects of the woven bamboo arrangement towards increasing ballistic resistance properties. The work focusses on the ballistic limit test known as NIJ V50, which qualifies materials to be registered for use in combat armor panels. The results show that the composites withstood 482.5 m/s ± 5 limit of bullet velocity, satisfying the NIJ test at level II. The findings give a strong sound basis decision to engineers whether or not green composites are qualified to replace synthetic composites in certain engineering applications. 相似文献
18.
简述了弹药在贮存状态下的失效特点,建立了基于成败型试验数据的弹药贮存寿命评估数学模型和统计分析方法,评估了某种弹药在一定置信度下的可靠贮存寿命。 相似文献
19.
《防务技术》2014,10(2):131-140
This paper deals with the issue of preparation of the aiming angles with the use of tabular firing tables and needed determination of the ballistic elements μB (ballistic wind wB, wxB, wZB, ballistic (virtual) temperature τB, ballistic density ρB) from the standardized met messages. The weighting factors are used for the calculation of ballistic elements μB that are incorporated into the trajectory calculations characteristics of weapon and ammunition. Two different methodologies practically used in the praxis are analysed and compared. For the comparison of the two methodologies the reference height of trajectory determined from the weighting factor functions is employed. On the basis of the analyses conducted, the potential for further increase in accuracy of these aiming angles preparation methods is pointed out. 相似文献