引信全电子安全系统失效分析及评估

本文根据全电子安全系统的一般结构模式,分析了其安全性设计的一般特点和可能造成其失效的各种原因,并在此基础上建立了全电子安全系统的失效故障树,给出了失效概率的定量计算结果。     

尾喷流底部流场与外流场干扰的拓扑结构数值模拟

本文从非定常全ＮＳ方程出发，运用时间推进方法，采用有限体积方法离散控制方程，模拟了轴对称钝锥尾喷流场与外流场的干扰，得到了随时间发展的精细的流场拓扑结构，并对几种出口压力比的不同情况进行了比较和分析。     

多轴数控机床的通用运动学综合空间误差模型

提出了一种适用任意结构多轴数控机床的新通用运动学综合空间误差模型。该模型包含了由于制造、安装、运动控制不精确和刀具、床身、工件热变形以及其它因素引起的初始位置误差与运动误差 ,反应了机床误差的实际变化规律 ,对机床工作区误差适时全补偿特别有效。为了发展该新型误差模型 ,运用了多体系统运动学理论和齐次变换矩阵。最后 ,利用所述建模理论和方法 ,给出了 3轴立式数控机床的空间误差模型表达式 ,并分析了其 36种误差成分的变化规律     

Periodic review inventory management with contingent use of two freight modes with fixed costs

We study a stochastic inventory model of a firm that periodically orders a product from a make‐to‐order manufacturer. Orders can be shipped by a combination of two freight modes that differ in lead‐times and costs, although orders are not allowed to cross. Placing an order as well as each use of each freight mode has a fixed and a quantity proportional cost. The decision of how to allocate units between the two freight modes utilizes information about demand during the completion of manufacturing. We derive the optimal freight mode allocation policy, and show that the optimal policy for placing orders is not an (s,S) policy in general. We provide tight bounds for the optimal policy that can be calculated by solving single period problems. Our analysis enables insights into the structure of the optimal policy specifying the conditions under which it simplifies to an (s,S) policy. We characterize the best (s,S) policy for our model, and through extensive numerical investigation show that its performance is comparable with the optimal policy in most cases. Our numerical study also sheds light on the benefits of the dual freight model over the single freight models. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

基于聚类算法的多无人机系统任务分配

针对现有任务分配方法在任务点较多时不易解算,且计算量大的问题,提出了基于模糊C-均值聚类算法的多无人机系统任务分配方法.首先,利用模糊C-均值聚类算法得到的隶属度矩阵对任务点进行初始分配;其次,针对基于空间划分聚类可能造成各UAV任务不均衡的问题,设计任务的局部优化调整规则;最后,结合单旅行商问题,利用Tabu Sea...     

Quantifying the performance effects of idle time utilization in multiserver systems

In many practical multiserver queueing systems, servers not only serve randomly arriving customers but also work on the secondary jobs with infinite backlog during their idle time. In this paper, we propose a c‐server model with a two‐threshold policy, denoted by (e d), to evaluate the performance of this class of systems. With such a policy, when the number of idle servers has reached d (<c), then e (<d) idle agents will process secondary jobs. These e servers keep working on the secondary jobs until they find waiting customers exist in the system at a secondary job completion instant. Using the matrix analytic method, we obtain the stationary performance measures for evaluating different (e, d) policies. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2007.     

解析美国大学TESL硕士培养的主要课程与设置理据——以曼卡托明尼苏达州立大学为例

把英语作为第二语言的教学是20世纪60年代在美国兴起并逐步走向独立的科目,它在综合相关专业的同时正在朝专业化方向发展。近年来其硕士层面的教育为全球培养了大量合格的中小学英语教师,取得了较好的成绩。本文以曼卡托明尼苏达州立大学英语系为例,并结合笔者在该系攻读TESL硕士学位时的经历,解析其主要课程及设置理据。     

(修，2撤3)关键几何参数对超声速膨胀器流场和性能影响的数值研究

为了揭示关键几何参数对超声速膨胀器流动特性影响的规律,对3种隔板安装角和5种出进口面积比超声速膨胀器设计工况下的流场进行了数值研究。结果表明：随隔板安装角增加,斜激波向出口迁移,斜激波强度略有降低,超声速膨胀器膨胀比减小,效率提高;随出进口面积比增加,流道内高速区显著扩大并逐渐靠近压力面,斜激波增强,出口流动损失增加,超声速膨胀器膨胀比增大,效率降低。为获得综合性能较优超声速膨胀器结构,需在较小出进口面积比和较大隔板安装角之间做折衷选择。     

正弦波调制的光纤环本征频率测量方法

为了弥补传统光纤环本征频率测量方法中方波调制存在死区的缺陷,提出正弦波调制的本征频率测量方法。对正弦波调制下的光纤陀螺输出信号进行分析,得到二次谐波幅度与调制频率间的二次函数关系,通过计算抛物线顶点即可求得本征频率。依据该原理对已有的光纤陀螺进行升级改造,研制了一套本征频率测量系统。试验结果表明:该方法可达到1×10-5的测量精度,是一种成本低、精度高的光纤环本征频率测量方法。     

杂波对空中平台侦察的影响分析

为从功率角度说明杂波对空中侦察设备的影响,提出一种新的杂波功率计算方法,该方法将杂波功率计算从单散射块的简单模型扩展到全向散射空间的精确模型。首先,选取合适的杂波后向散射系数模型;其次,构建空中平台与机载雷达的几何模型,详细地推导了等距离环数学表达式,在考虑距离模糊情况下推导了杂波功率数学表达式;最后,仿真结果表明:该方法比文献杂波功率计算方法更加准确,从功率角度说明了杂波对侦察的影响,为后面研究杂波抑制奠定了基础。