单位反馈非线性系统的一种辨识方法

用算子符方法及傅里叶变换研究了单位反馈线性系统的一种辨识方法,并给出了辨识算式。     

微机控制系统中的信息交换技术探讨

说明了在DOS环境下如何利用内存直接映像技术在微机控制系统中实现信息交换.介绍了双端口数据存储器的使用;提供了解决在对数据交换的实时性要求较高的控制系统中如何进行数据交换这一问题的方法和思路.     

谈军用标准的实施与监督

本文阐述了军用标准实施与监督工作存在的问题,并从标准基本属性及其实施与监督的客观规律出发,提出了军用标准实施与监督体系建设应做好的工作。     

改进粒子群算法在导弹火力分配中的应用

粒子群优化算法是一种新兴的优化技术,思想来源于人工生命和演化计算理论.由于该算法简单易实现,可调参数少,目前已得到广泛研究和应用.在建立导弹武器火力分配数学模型的基础上,运用改进粒子群算法对模型进行了最优化求解,实例的计算结果表明该优化算法对于模型的求解具有较好的收敛性.     

扭力轴头的堆焊修复加激光强化

本文对某重载车辆扭力轴轴头的堆焊修复加激光强化工艺进行了试验研究.优选了激光强化的工艺参数;分析了堆焊及激光强化层的组织;并进行了硬度及接触疲劳试验.试验结果表明:堆焊加激光强化层的硬度高,其接触疲劳性能比原材料高频淬火略有提高;堆焊加激光强化修复扭力轴轴头具有较高的经济效益.     

日常交互中朋友关系强度度量方法

针对如何度量日常生活中人们之间的关系强度问题展开研究,提出一个从日常轨迹、语义位置以及语义标签三个层次度量朋友之间关系强度的层级模型FRSHV。采用动态时间规整模型通过计算朋友之间的空间距离来度量其日常轨迹之间的相似度,进而使用轨迹序列熵值对用户每天轨迹的相似度进行加权处理,将其作为朋友之间的关系强度;采用主题模型隐含狄利克雷分布分别计算朋友之间的基于语义位置和语义标签的行为模式的相似性,将其作为朋友之间的关系强度;采用集成学习的思想对三个层次的度量结果进行投票,以投票结果作为最终的朋友之间的关系强度。在公开数据集上对FRSHV模型的有效性进行实验验证,结果表明该模型能够有效地度量朋友之间的关系强度。     

图像融合的客观质量评估

随着图像融合技术在武器自动化系统中的广泛应用,图像融合的质量评估问题,即图像融合的性能评估问题,在融合方案的选择中具有重要地位。由于人工主观的图像融合评估具有很大的工程化和自动化难度,国际上研究人员都将研究目标投向了客观图像融合质量评估的研究中。从历史发展的角度系统地回顾了客观图像融合质量评估的发展历程和研究现状,对近十年来的客观图像融合质量评估方法进行了分类和分析。同时,对于国际上几种流行的图像融合质量评估方法的性能测定思路进行了介绍。对于图像融合质量评估现状的分析和讨论有助于我们对图像融合的质量评估方法进行更深入的研究。     

Effects of total pressures and equivalence ratios on kerosene/air rotating detonation engines using a paralleling CE/SE method

In this paper, the kerosene/air rotating detonation engines(RDE) are numerically investigated, and the emphasis is laid on the effects of total pressures and equivalence ratios on the operation characteristics of RDE including the initiation, instabilities, and propulsive performance. A hybrid MPI + OpenMP parallel computing model is applied and it is proved to be able to obtain a more effective parallel performance on high performance computing(HPC) systems. A series of cases with the total pressure of 1 MPa, 1.5 MPa, 2 MPa, and the equivalence ratio of 0.9, 1, 1.4 are simulated. On one hand, the total pressure shows a significant impact on the instabilities of rotating detonation waves. The instability phenomenon is observed in cases with low total pressure (1 MPa) and weakened with the increase of the total pressure. The total pressure has a small impact on the detonation wave velocity and the specific impulse. On the other hand, the equivalence ratio shows a negligible influence on the instabilities, while it affects the ignition process and accounts for the detonation velocity deficit. It is more difficult to initiate rotating detonation waves directly in the lean fuel operation condition. Little difference was observed in the thrust with different equivalence ratios of 0.9, 1, and 1.4. The highest specific impulse was obtained in the lean fuel cases, which is around 2700 s. The findings could provide insights into the understanding of the operation characteristics of kerosene/air RDE.     

Mechanical behavior and failure mechanism of polyurea nanocomposites under quasi-static and dynamic compressive loading

Polyurea is an elastomeric material that can be applied to enhance the protection ability of structures under blast and impact loading.In order to study the compressive mechanical properties of SiC/polyurea nanocomposites under quasi-static and dynamic loading,a universal testing machine and split Hop-kinson pressure bar(SHPB)apparatus were used respectively.The stress-strain curves were obtained on polyurea and its composites at strain rates of 0.001-8000 s-1.The results of the experiment suggested that increase in the strain rates led to the rise of the flow stress,compressive strength,strain rate sensitivity and strain energy.This indicates that all of the presented materials were dependent on strain rate.Moreover,these mechanical characters were enhanced by incorporating a small amount of SiC into polyurea matrix.The relation between yield stress and strain rates were established using the power law functions.Finally,in order to investigate the fracture surfaces and inside information of failed specimens,scanning electron microscopy(SEM)and micro X-ray computed tomography(micro-CT)were used respectively.Multiple voids,crazes,micro-cracks and cracking were observed in fracture surfaces.On the other hand,the cracking propagation was found in the micro-CT slice images.It is essential to understand the deformation and failure mechanisms in all the polyurea materials.