Prediction of three-dimensional elastic behavior of filament-wound composites based on the bridging model

This work provides a method to predict the three-dimensional equivalent elastic properties of the filament-wound composites based on the multi-scale homogenization principle.In the meso-scale,a representative volume element(RVE)is defined and the bridging model is adopted to establish a theoretical predictive model for its three-dimensional equivalent elastic constants.The results obtained through this method for the previous experimental model are compared with the ones gained respec-tively by experiments and classical laminate theory to verify the reliability of this model.In addition,the effects of some winding parameters,such as winding angle,on the equivalent elastic behavior of the filament-wound composites are analyzed.The rules gained can provide a theoretical reference for the optimum design of filament-wound composites.     

Multi-objectives nonlinear structure optimization for actuator in trajectory correction fuze subject to high impact loadings

This paper presents an actuator used for the trajectory correction fuze, which is subject to high impact loadings during launch. A simulation method is carried out to obtain the peak-peak stress value of each component, from which the ball bearings are possible failures according to the results. Subsequently, three schemes against impact loadings, full-element deep groove ball bearing and integrated raceway, needle roller thrust bearing assembly, and gaskets are utilized for redesigning the actuator to effectively reduce the bearings' stress. However, multi-objectives optimization still needs to be conducted for the gaskets to decrease the stress value further to the yield stress. Four gasket's structure parameters and three bearings' peak-peak stress are served as the four optimization variables and three objectives, respectively. Optimized Latin hypercube design is used for generating sample points, and Kriging model selected according to estimation result can establish the relationship between the variables and objec-tives, representing the simulation which is time-consuming. Accordingly, two optimization algorithms work out the Pareto solutions, from which the best solutions are selected, and verified by the simulation to determine the gaskets optimized structure parameters. It can be concluded that the simulation and optimization method based on these components is effective and efficient.     

Study of high-speed-impact-induced conoidal fracture of Ti alloy layer in composite armor plate composed of Ti-and Al-alloy layers

In order to understand the mechanism of conoidal fracture damage caused by a high-speed fragment-simulating projectile in titanium alloy layer of a composite armor plate composed of titanium- and aluminum-alloy layers, the ballistic interaction process was successfully simulated based on the Tuler-Butcher and GISSMO coupling failure model. The simulated conoidal fracture morphology was in good agreement with the three-dimensional industrial-computed-tomography image. Further, three main damage zones (zones I, II, and III) were identified besides the crater area, which are located respectively near the crater area, at the back of the target plate, and directly below the crater area. Under the high-speed-impact conditions, in zone II, cracks began to form at the end of the period of crack formation in zone I, but crack formation in zone III started before the end of crack formation in zone II. Further, the damage mechanism differed for different stress states. The microcracks in zone I were formed both by void connection and shear deformation. In the formation of zone I, the stress triaxiality ranged from-2.0 to-1.0, and the shear failure mechanism played a dominant role. The microcracks in zone II showed the combined features of shear deformation and void connection, and during the for-mation process, the stress triaxiality was between 0 and 0.5 with a mixed failure mode. Further, the microcracks in zone III showed obvious characteristics of void connection caused by local melting. During the zone III formation, the triaxiality was 1.0-1.9, and the ductile fracture mechanism was dominant, which also reflects the phenomenon of spallation.     

一种基于地表类型的地杂波快速仿真方法

地杂波仿真技术对机载雷达的设计与研制有着重要影响.针对机载雷达地杂波仿真技术开展研究,提出了一种基于地表类型的地杂波快速仿真方法.该方法以数字地图和载机航线为两个重要输入,采用雷达波束照射区域的数字地图为有效先验地理环境信息进行仿真,提高了杂波仿真的逼真度;同时针对传统仿真方法中计算量较大的问题,优化了散射单元中天线功...     

武器装备体系贡献率研究现状分析

武器装备体系贡献率是全面、科学地评估武器装备在体系中发挥作用情况的指标,是目前装备论证领域的研究热点.收集了近年来国内在该领域的研究成果和国外与之相关的研究成果,通过对武器装备体系贡献率的概念内涵、属性特征、评估指标和方法的总结归纳,分析了研究中亟待解决的问题和面临的挑战,为武器装备体系贡献率的研究工作提供参考借鉴.     

基于磁流变液的舰载机拦阻过程模糊PID控制

针对舰载机拦阻过程的运动特性分析,建立了舰载机拦阻缓冲过程的力学模型与状态方程,通过对基于磁流变阻尼拦阻缓冲过程的分析,引入了位移和速度矢量作为磁流变缓冲拦阻控制系统的输入,完成基于模糊控制的舰载机拦阻缓冲过程控制。应用模糊PID控制器非线性拟合能力来适应舰载机着舰情况变化,并仿真验证建立的磁流变缓冲拦阻模糊PID算法具有较好的预测精度和应用范围。     

基于多点空间直线拟合的调炮精度检测方法

针对火炮身管上标记两个点检测调炮精度受制于单个空间点坐标测量精度的问题,提出通过增加身管上标记点的冗余数量来提高调炮精度的检测方法。应用最小二乘原理对多个空间点进行直线拟合,并采用Monte Carlo方法对身管指向的测量精度进行分析。结果表明:标记4个点、5个点、6个点和7个点与标记2个点(传统方法)相比,其身管指向的测量精度分别提高了约6%、18%、19%和21%。该方法适用于对调炮精度检测要求较高的场合,综合考虑工作效率和测量精度这两个因素,推荐标记5个点测量身管指向。     

PDSC评定柴油氧化安定性

为研究一种操作简便、检测快速的柴油氧化安定性评定方法,采用高压差示扫描量热法(PDSC)对柴油氧化安定性进行评定,通过单因素变量法分析了升温速率、恒容氧压、试样量对柴油氧化安定性的影响,确定了3种因素水平分别为8~12℃/min,2.5~4.5 MPa,2.5~3.5 mg。通过正交试验法得出升温速率对柴油氧化安定性的影响最大,恒容氧压的影响最小。方差分析表明在升温速率为8℃/min,恒容氧压为3.5 MPa,试样量为3.0 mg时,试验方法的区分性最佳。在该试验条件下,考察了5种油样的重复性,结果表明PDSC法的重复性满足标准要求。     

水顶油顺序输送油水混合模型研究

顺序输送是利用一条管道输送多种油品,因其可最大限度发挥管道输送潜能而被广泛应用。按照前后行液体不同可分为水顶油、油顶水和不同油品间顺序输送等,其中水顶油顺序输送主要用于管道撤收前的排空作业。对水顶油顺序输送油水混合过程进行了分析,建立了油水混合模型,利用CFD对其进行数值求解,并将仿真结果与前期理论分析进行了对比,两者吻合较好。所得结论可为机动管线水顶油排空作业提供科学指导。     

Single batch machine scheduling with deliveries

We consider the problem of scheduling a set of n jobs on a single batch machine, where several jobs can be processed simultaneously. Each job j has a processing time p_j and a size s_j. All jobs are available for processing at time 0. The batch machine has a capacity D. Several jobs can be batched together and processed simultaneously, provided that the total size of the jobs in the batch does not exceed D. The processing time of a batch is the largest processing time among all jobs in the batch. There is a single vehicle available for delivery of the finished products to the customer, and the vehicle has capacity K. We assume that K = rD, where and r is an integer. The travel time of the vehicle is T; that is, T is the time from the manufacturer to the customer. Our goal is to find a schedule of the jobs and a delivery plan so that the service span is minimized, where the service span is the time that the last job is delivered to the customer. We show that if the jobs have identical sizes, then we can find a schedule and delivery plan in time such that the service span is minimum. If the jobs have identical processing times, then we can find a schedule and delivery plan in time such that the service span is asymptotically at most 11/9 times the optimal service span. When the jobs have arbitrary processing times and arbitrary sizes, then we can find a schedule and delivery plan in time such that the service span is asymptotically at most twice the optimal service span. We also derive upper bounds of the absolute worst‐case ratios in both cases. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 470–482, 2015