方位向电扫描SAR系统参数设计与仿真验证

方位向电扫描SAR(Terrain Observation by Progressive Scans,TOPSAR)是星载SAR的一种全新工作模式,这种工作模式通过天线波束在方位向扫描,在保持ScanSAR宽测绘带优点的同时,解决了扇贝效应(scalloping)问题。针对这种工作模式要求天线在方位向和距离向都进行扫描的特点,推导了方位分辨率与扫描周期的具体关系,进而分析了系统参数的约束关系,提出了适于工程设计的系统参数设计方法。最后,用TerraSAR-X的参数进行了一组设计,以该设计结果为输入参数,运用SBRAS(SpaceBorne Radar Advance Simulator)进行了信号仿真,仿真结果验证了方法的有效性。     

马尔可夫过程的k/N系统使用任务完成能力分析

研究了任务期间允许换件维修和备件供应时k/N系统的任务完成能力.首先,利用马尔可夫过程分析了k/N系统的状态转移过程,研究了k/N系统在特定维修保障策略下的运行过程.然后,以k/N系统固定任务时间内在正常状态停留时间的分布函数作为其任务完成概率模型,并通过全概率分解和更新过程的分析方法对任务完成概率进行求解.最后,利用任务完成概率模型在Matlab中绘制了任务完成概率随任务时间、任务量、备件携行数量以及备件平均供应时间的变化曲线,讨论并分析了对任务完成概率的影响.     

基于PSD的炮口扰动测试方法

针对火炮性能测试时难于实时、准确测量炮口扰动的问题,提出了一种基于光电位置传感器（Position Sen-sitive Detector,PSD）的炮口扰动测试方法。采用光学杠杆、激光脉冲调制、高精度光电位置传感器、高速数据采集技术,以及所建立的PSD测量炮口角数学模型构建炮口角测量系统,可有效消除炮口闪光、外界自然光及蚊虫干扰,具有较高的灵敏度、精度和可靠性。     

大气气溶胶对激光制导探测作用距离影响的数值分析

针对大气气溶胶辐射传输衰减效应是影响1.06μm激光武器系统性能的重要因素,探讨了大气气溶胶对1.06μm激光探测作用距离的影响,构建了激光制导波段探测作用距离模型,并在此基础上进行激光探测作用距离的大气气溶胶影响数值仿真。试验表明,基于该模型计算的大气透过特性准确度基本符合国际公认理论分析值,对作用距离的评估结果与客观实际基本相符,对最大限度分析利用战场气象环境以确保武器作战性能的充分发挥具有重要价值,可为激光探测作用距离的气象环境影响后续发展奠定一定基础。     

The effect of al particle size on thermal decomposition,mechanical strength and sensitivity of Al/ZrH2/PTFE composite

To study the thermal decomposition of Al/ZrH2/PTFE with different Al particle size as well as mechanical strength and impact sensitivity under medium and low strain rates, molding-vacuum sintering was adopted to prepare four groups of power materials and cylindrical specimens with different Al particle size. The active decomposition temperature of ZrH2 was obtained by TG-DSC, and the quasi-static me-chanics/reaction characteristics as well as the impact sensitivity of the specimen were studied respec-tively by quasi-static compression and drop-hammer test. The results show that the yield strength of the material decreased with the increase of the Al particle size, while the compressive strength, failure strain and toughness increased first and then decreased, which reached the maximum values of 116.61 MPa, 191％, and 119.9 MJ/m respectively when the Al particle size is 12—14μm because of particle size grading. The specimens with the highest strength and toughness formed circumferential open cracks and reacted partly when pressed. Those with developmental cracks formed inside did not react. It is considered that fracture of specimens first triggered initial reaction between Al and PTFE to release an amount of heat. Then ZrH2 was activated and decomposed, and participated in subsequent reaction to generate ZrC. The impact sensitivity of the specimens decreased with the increase of Al particle size.     

Partial penetration of annular grooved projectiles impacting ductile metal targets

Changing and optimizing the projectile nose shape is an important way to achieve specific ballistic performance. One special ballistic performance is the embedding effect, which can achieve a delayed high-explosive reaction on the target surface. This embedding effect includes a rebound phase that is significantly different from the traditional penetration process. To better study embedment behavior, this study proposed a novel nose shape called an annular grooved projectile and defined its interaction process with the ductile metal plate as partial penetration. Specifically, we conducted a series of low-velocity-ballistic tests in which these steel projectiles were used to strike 16-mm-thick target plates made with 2024-O aluminum alloy. We observed the dynamic evolution characteristics of this aluminum alloy near the impact craters and analyzed these characteristics by corresponding cross-sectional views and numerical simulations. The results indicated that the penetration resistance had a brief decrease that was influenced by its groove structure, but then it increased significantly-that is, the fluctuation of penetration resistance was affected by the irregular nose shape. Moreover, we visualized the distribution of the material in the groove and its inflow process through the rheology lines in microscopic tests and the highlighted mesh lines in simulations. The combination of these phenomena revealed the embed-ment mechanism of the annular grooved projectile and optimized the design of the groove shape to achieve a more firm embedment performance. The embedment was achieved primarily by the target material filled in the groove structure. Therefore, preventing the shear failure that occurred on the filling material was key to achieving this embedding effect.     

Effect of the end cap on the fragment velocity distribution of a cylindrical cased charge

The prediction of the fragment velocity distribution of a cylindrical cased charge with end caps is one of the key issues to assess the damage efficiency of the warhead. However, limited work has been con-ducted to predict the fragment velocity distributions along the axis of cylindrical cased charges with end caps. This paper presents a study of the velocity distribution of fragments caused by the explosion of a cylindrical cased charge with end caps. The fragment velocity distribution and the end cap velocity were determined by an X-ray radiography method, and the axial fragment distribution was determined by witness plates. It was found that the velocities of fragments, especially near the edge, were increased when the end caps were added, and the position of maximum velocity is closer to the non-detonation end. The fragment velocities were increased, and the fragment projection range was decreased with the increase of the thickness of the end cap. A formula for fragment velocity distributions of a cylindrical cased charge with end caps, which is based on Huang's formula, was proposed by the theoretical analysis and data fitting and validated experimentally. The results indicate that the proposed formula is accurate in predicting the fragment velocity distribution along the axis of a cylindrical cased charge with end caps detonated at one end.     

Background dominant colors extraction method based on color image quick fuzzy c-means clustering algorithm

A quick and accurate extraction of dominant colors of background images is the basis of adaptive camouflage design. This paper proposes a Color Image Quick Fuzzy C-Means (CIQFCM) clustering algorithm based on clustering spatial mapping. First, the clustering sample space was mapped from the image pixels to the quantized color space, and several methods were adopted to compress the amount of clustering samples. Then, an improved pedigree clustering algorithm was applied to obtain the initial class centers. Finally, CIQFCM clustering algorithm was used for quick extraction of dominant colors of background image. After theoretical analysis of the effect and efficiency of the CIQFCM algorithm, several experiments were carried out to discuss the selection of proper quantization intervals and to verify the effect and efficiency of the CIQFCM algorithm. The results indicated that the value of quantization intervals should be set to 4, and the proposed algorithm could improve the clustering efficiency while maintaining the clustering effect. In addition, as the image size increased from 128 × 128 to 1024 × 1024, the efficiency improvement of CIQFCM algorithm was increased from 6.44 times to 36.42 times, which demonstrated the significant advantage of CIQFCM algorithm in dominant colors extraction of large-size images.     

Blast resistance evaluation of urban utility tunnel reinforced with BFRP bars

To improve corrosion-resistance of shallow-buried concrete urban utility tunnels(UUTs),basalt fiber reinforced polymer(BFRP)bars are applied to reinforce UUTs.As the UUT must have excellent survival capability under accidental explosions,a shallow-buried BFRP bars reinforced UUT(BBRU)was designed and constructed.Repetitive blast experiments were carried out on this BBRU.Dynamic responses,damage evolutions and failure styles of the BBRU under repetitive explosions were revealed.The tunnel roof is the most vulnerable component and longitudinal cracks develop along the tunnel.When the scaled distance is larger than 1.10 m/kg1/3,no cracks are observed in the experiments.When the BBRU is severely damaged,there are five cracks forming and developing along the roof.The roof is simplified as a clamped-supported one-way slab,proved by the observation that the maximum strain of the transverse bar is much larger than that of the longitudinal bar.Dynamic responses of the roof slab are predicted by dynamic Euler beam theory,which can consistently predict the roof displacement under large-scaled-distance explosion.Compared with the UUT reinforced with steel bars,the BBRU has advantages in blast resistance with smaller deflections and more evenly-distributed cracks when the scaled distance is smaller than 1.260 m/kg1/3 and the steel bars enter plastic state.Longer elastic defamation of the BFRP bars endows the UUT more excellent blast resistance under small-scaled-distance explosions.     

一种基于可用性的战术通信子网评估方法

针对战术通信子网可用性建模,利用马尔可夫方法对单网可用性模型进行了数学分析,采用蒙特卡洛仿真法进行验证,并给出了一种考虑了战术层级特点以及节点权重的通信网可用性仿真模型,计算可用性参数来对系统做出可用性评估.实验结果表明,该仿真方法具有一定的有效性和可用性,为战术通信网可用性评估提供了新的思路及参考方法.