高电流密度激光加速器

用计算机模拟了电子在高斯激光场,纵向磁场、电子束流电磁场三种场作用下的运动。讨论影响电子被加速的因素。     

数据并行程序设计语言中分布数组的地址计算

本文讨论了在大规模并行计算机上实现数据并行程序设计语言的关键问题──分布数组的地址计算问题。文中详细给出了维分布数组的下标地址计算公式,分布数组的内情向量结构以及分布数组映射函数算法,并对有关编译实现技术进行了探讨。     

CN-1型野营电热采暖自动控制系统研究

为解决部队在寒区野外训练的采暖问题,使用新型涂料进行辐射采暖。由于涂料电阻受温度影响较大,不能采用常规的方法进行控制,同时野外采暖对节能要求也非常突出,为达到节能和温度控制的目的,采用A/D对电流和电压进行采样,然后利用单片机计算出当前的功率,根据功率的设定值和实际值的差值来作为对涂料电压调整的依据,最后通过可控硅进行调节,从而达到功率控制和节能的目的。通过寒区试验,该控制方式能够很好地满足部队野外训练采暖的需要。     

以两个建设"紧密结合"为着力点加强党的先进性建设

胡总书记提出的两个建设“紧密结合”的思想,明确了新世纪加强党的建设的核心内容,是先进性建设的着力点所在。党的执政能力建设与先进性建设具有内在逻辑联系,必须充分认清两个建设“紧密结合”的重要性;两个建设“紧密结合”关系党的建设全局,必须将两个建设统一于党的建设新的伟大工程;党的执政实践是检验先进性的重要标准,必须在执政实践中加强党的先进性建设。     

A two‐echelon inventory‐location problem with service considerations

We study the problem of designing a two‐echelon spare parts inventory system consisting of a central plant and a number of service centers each serving a set of customers with stochastic demand. Processing and storage capacities at both levels of facilities are limited. The manufacturing process is modeled as a queuing system at the plant. The goal is to optimize the base‐stock levels at both echelons, the location of service centers, and the allocation of customers to centers simultaneously, subject to service constraints. A mixed integer nonlinear programming model (MINLP) is formulated to minimize the total expected cost of the system. The problem is NP‐hard and a Lagrangian heuristic is proposed. We present computational results and discuss the trade‐off between cost and service. © 2009 Wiley Periodicals, Inc. Naval Research Logistics 2009     

Approximation algorithms for general one‐warehouse multi‐retailer systems

Logistical planning problems are complicated in practice because planners have to deal with the challenges of demand planning and supply replenishment, while taking into account the issues of (i) inventory perishability and storage charges, (ii) management of backlog and/or lost sales, and (iii) cost saving opportunities due to economies of scale in order replenishment and transportation. It is therefore not surprising that many logistical planning problems are computationally difficult, and finding a good solution to these problems necessitates the development of many ad hoc algorithmic procedures to address various features of the planning problems. In this article, we identify simple conditions and structural properties associated with these logistical planning problems in which the warehouse is managed as a cross‐docking facility. Despite the nonlinear cost structures in the problems, we show that a solution that is within ε‐optimality can be obtained by solving a related piece‐wise linear concave cost multi‐commodity network flow problem. An immediate consequence of this result is that certain classes of logistical planning problems can be approximated by a factor of (1 + ε) in polynomial time. This significantly improves upon the results found in literature for these classes of problems. We also show that the piece‐wise linear concave cost network flow problem can be approximated to within a logarithmic factor via a large scale linear programming relaxation. We use polymatroidal constraints to capture the piece‐wise concavity feature of the cost functions. This gives rise to a unified and generic LP‐based approach for a large class of complicated logistical planning problems. © 2009 Wiley Periodicals, Inc. Naval Research Logistics, 2009     

A hybrid method for simulation factor screening

Factor screening is performed to eliminate unimportant factors so that the remaining important factors can be more thoroughly studied in later experiments. Controlled sequential bifurcation (CSB) and controlled sequential factorial design (CSFD) are two new screening methods for discrete‐event simulations. Both methods use hypothesis testing procedures to control the Type I Error and power of the screening results. The scenarios for which each method is most efficient are complementary. This study proposes a two‐stage hybrid approach that combines CSFD and an improved CSB called CSB‐X. In Phase 1, a prescreening procedure will estimate each effect and determine whether CSB‐X or CSFD will be used for further screening. In Phase 2, CSB‐X and CSFD are performed separately based on the assignment of Phase 1. The new method usually has the same error control as CSB‐X and CSFD. The efficiency, on the other hand, is usually much better than either component method. © 2009 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

Optimizing natural gas pipeline transmission with nonuniform elevation: A new initialization approach

In this paper, we develop an iterative piecewise linear approximation approach with a novel initialization method to solve natural gas pipeline transmission problems with the nonuniform network elevation. Previous approaches, such as energy minimization methods, cannot be applied to solve problems with the nonuniform network elevation because they exclude pressure range constraints, and thus provide solutions far from optimum. We propose a new initialization model that considers pressure range constraints and improves the optimality of the solutions and the computational efficiency. Furthermore, we extend the energy minimization methods and provide the necessary conditions under which the extended methods operate in networks with the nonuniform elevation. We test the performances of the methods with previously reported pipeline networks from the literature, with the open data set GasLib, and with our industrial collaborator. The initialization approach is shown to be more efficient than the method with fixed initial breakpoints. The newly proposed initialization approach generates solutions with a higher accuracy than the extended energy minimization methods, especially in large‐size networks. The proposed method has been applied to natural gas transmission planning by the China National Petroleum Corporation and has brought a direct profit increase of 330 million U.S. dollars in 2015‐2017.     

Data-driven research in retail operations—A review

We review the operations research/management science literature on data-driven methods in retail operations. This line of work has grown rapidly in recent years, thanks to the availability of high-quality data, improvements in computing hardware, and parallel developments in machine learning methodologies. We survey state-of-the-art studies in three core aspects of retail operations—assortment optimization, order fulfillment, and inventory management. We then conclude the paper by pointing out some interesting future research possibilities for our community.