VR在潜艇作战模拟中的应用

就现代模拟仿真训练关键技术之一的虚拟现实技术的基本情况、在潜艇作战模拟中的应用及其主要技术问题作了探讨,并提出了一些有益的设想。     

记录可寻址随机访问文件的设计与实现

记录可寻址随机访问文件是一种新型ＦＯＲＴＲＡＮ文件,它集中了顺序与直接文件两者的优点,为用户随机访问文件中不等长记录提供了更为有效的手段。本文不仅介绍了其使用方法,而且还讨论了实现中的有关问题。     

大型反射镜双轴稳定系统研究

提出了采用动力调谐陀螺和压电晶体速率陀螺构成上反射镜双轴稳定系统,论述了影响系统稳定精度的各种因素和提高稳定精度的技术途径,并给出了实验结果。     

关于小高炮射击偏差观测方法之我见

小高炮射击偏差观测的提前时间观测时机法与传统的等距法,两者的观测时机虽不同,精度也不同,但从原理上讲,都是一种近似方法,不能说哪个原理上有问题,哪个原理上无问题。从部队现装备看,在部队日常训练打靶中,前者的观测时机更易于把握,作为现装备的一种革新,有研究必要。     

风对旋转弹丸弹道轨迹的交叉影响

本文解释了风对旋转弹丸弹道轨迹交叉影响的物理本质,分析了风对直射弹道和曲射弹道的影响。指出横风对于直射弹道的交叉影响引起的射程偏差较大;而纵风对于曲射弹道的交叉影响所引起的方向偏差在大射角时也较为明显。     

强化学习在多阶段装备组合规划问题中的应用

针对多阶段武器装备组合规划中的选择难、规划难问题,提出基于多目标优化算法以及强化学习技术的混合优化方法。在各个阶段以装备组合效能最大和成本最小为准则,构建单阶段多目标优化模型,并设计基于非支配排序遗传算法的求解算法以生成各阶段的Pareto解,在此基础上建立多阶段的组合优化模型。通过强化学习的Q-Learning方法,在各阶段的Pareto解中采用探索或者利用两种模式,生成各阶段的装备组合,并指导下一阶段的装备选型,从而生成整个周期内的规划方案。通过对比实验分析,验证了所提模型和算法的有效性,能够为多阶段武器装备组合规划提供辅助决策。     

Peridynamic modeling and simulation of thermo-mechanical de-icing process with modified ice failure criterion

De-icing technology has become an increasingly important subject in numerous applications in recent years. However, the direct numerical modeling and simulation the physical process of thermo-mechanical deicing is limited. This work is focusing on developing a numerical model and tool to direct simulate the de-icing process in the framework of the coupled thermo-mechanical peridynamics theory. Here, we adopted the fully coupled thermo-mechanical bond-based peridynamics (TM-BB-PD) method for modeling and simulation of de-icing. Within the framework of TM-BB-PD, the ice consti-tutive model is established by considering the influence of the temperature difference between two material points, and a modified failure criteria is proposed, which takes into account temperature effect to predict the damage of quasi-brittle ice material. Moreover, thermal boundary condition is used to simulate the thermal load in the de-icing process. By comparing with the experimental results and the previous reportedfinite element modeling, our numerical model shows good agreement with the pre-vious predictions. Based on the numerical results, we find that the developed method can not only predict crack initiation and propagation in the ice, but also predict the temperature distribution and heat conduction during the de-icing process. Furthermore, the influence of the temperature for the ice crack growth pattern is discussed accordingly. In conclusion, the coupled thermal-mechanical peridynamics formulation with modified failure criterion is capable of providing a modeling tool for engineering ap-plications of de-icing technology.     

Partial penetration of annular grooved projectiles impacting ductile metal targets

Changing and optimizing the projectile nose shape is an important way to achieve specific ballistic performance. One special ballistic performance is the embedding effect, which can achieve a delayed high-explosive reaction on the target surface. This embedding effect includes a rebound phase that is significantly different from the traditional penetration process. To better study embedment behavior, this study proposed a novel nose shape called an annular grooved projectile and defined its interaction process with the ductile metal plate as partial penetration. Specifically, we conducted a series of low-velocity-ballistic tests in which these steel projectiles were used to strike 16-mm-thick target plates made with 2024-O aluminum alloy. We observed the dynamic evolution characteristics of this aluminum alloy near the impact craters and analyzed these characteristics by corresponding cross-sectional views and numerical simulations. The results indicated that the penetration resistance had a brief decrease that was influenced by its groove structure, but then it increased significantly-that is, the fluctuation of penetration resistance was affected by the irregular nose shape. Moreover, we visualized the distribution of the material in the groove and its inflow process through the rheology lines in microscopic tests and the highlighted mesh lines in simulations. The combination of these phenomena revealed the embed-ment mechanism of the annular grooved projectile and optimized the design of the groove shape to achieve a more firm embedment performance. The embedment was achieved primarily by the target material filled in the groove structure. Therefore, preventing the shear failure that occurred on the filling material was key to achieving this embedding effect.     

Newsvendor problems with sequentially revealed demand information

This article analyzes a capacity/inventory planning problem with a one‐time uncertain demand. There is a long procurement leadtime, but as some partial demand information is revealed, the firm is allowed to cancel some of the original capacity reservation at a certain fee or sell off some inventory at a lower price. The problem can be viewed as a generalization of the classic newsvendor problem and can be found in many applications. One key observation of the analysis is that the dynamic programming formulation of the problem is closely related to a recursion that arises in the study of a far more complex system, a series inventory system with stochastic demand over an infinite horizon. Using this equivalence, we characterize the optimal policy and assess the value of the additional demand information. We also extend the analysis to a richer model of information. Here, demand is driven by an underlying Markov process, representing economic conditions, weather, market competition, and other environmental factors. Interestingly, under this more general model, the connection to the series inventory system is different. © 2012 Wiley Periodicals, Inc. Naval Research Logistics 2012     

火箭发动机应储数量的研究

火箭发动机应储数量的确定是其维修保养工作中的一个重要问题。在满足一定精度的前提下,以可靠性评估为中心研究寿命服从逆威布尔分布的火箭发动机的应储数量问题。在具有二项移走的逐步增加I型区间截尾模型下(被随机移走的产品数目服从二项分布),采取不同方案给出决定火箭发动机寿命的关键性参数的可靠性估计,据此确定其应储数量。最后,通过随机模拟方法给出在一定精度指标下火箭发动机的应储数量。