Chain damage effects of multi-spaced plates by reactive jet impact

Chain damage is a new phenomenon that occurs when a reactive jet impacts and penetrates multi-spaced plates.The reactive jet produces mechanical perforations on the spaced plates by its kinetic energy(KE),and then results in unusual chain rupturing effects and excessive structural damage on the spaced plates by its deflagration reaction.In the present study,the chain damage behavior is initially demonstrated by experiments.The reactive liners,composed of 26 wt％Al and 74 wt％PTFE,are fabricated through a pressing and sintering process.Three reactive liner thicknesses of 0.08 CD,0.10 CD and 0.12 CD(charge diameter)are chosen to carry out the chain damage experiments.The results show a chain rupturing phenomenon caused by reactive jet.The constant reaction delay time and the different penetration velocities of reactive jets from liners with different thicknesses result in the variation of the deflagration position,which consequently determines the number of ruptured plates behind the armor.Then,the finite-element code AUTODYN-3D has been used to simulate the kinetic energy only-induced rupturing effects on plates,based on the mechanism of behind armor debris(BAD).The significant discrepancies between simulations and experiments indicate that one enhanced damage mechanism,the behind armor blast(BAB),has acted on the ruptured plates.Finally,a theoretical model is used to consider the BAB-induced enhancement,and the analysis shows that the rupturing area on aluminum plates depends strongly upon the KE only-induced pre-perforations,the mass of reactive materials,and the thickness of plates.     

Visual SLAM in dynamic environments based on object detection

A great number of visual simultaneous localization and mapping (VSLAM) systems need to assume static features in the environment. However, moving objects can vastly impair the performance of a VSLAM system which relies on the static-world assumption. To cope with this challenging topic, a real-time and robust VSLAM system based on ORB-SLAM2 for dynamic environments was proposed. To reduce the influence of dynamic content, we incorporate the deep-learning-based object detection method in the visual odometry, then the dynamic object probability model is added to raise the efficiency of object detection deep neural network and enhance the real-time performance of our system. Experiment with both on the TUM and KITTI benchmark dataset, as well as in a real-world environment, the results clarify that our method can significantly reduce the tracking error or drift, enhance the robustness, accuracy and stability of the VSLAM system in dynamic scenes.     

XNAV中的相对论效应(III)——时空测量值的坐标转换

在文献[1-3]中求得的XNAV基本方程中,时间和距离是指太阳质心系(BCRS)中的坐标量。但在实际测量中,接收机测量的时间是时钟的固有时,接收机的位置一般应以地心系(GCRS)为基准。在相对论框架内完成这两个坐标转换,使得XNAV测量方程能够直接得到应用。最后给出了完整的XNAV高精度测量方程及其在实际测量中的计算过程。     

基于GIS的泥石流灾害系统中数据集成方案

为增强泥石流灾害数据可视化管理系统的兼容性,分析了多源数据集成技术,讨论了泥石流灾害工程中多来源数据和多格式数据的问题,以及在应用系统中对多源数据集成处理的要求,提出以SuperMap结合VC 6．0在基于GIS的泥石流灾害工程应用中实现多源数据集成的一种解决方案,实现了系统中对多来源、多格式数据的集成功能,从而达到了系统能直接访问、处理不同来源空间数据的目标。     

军事虚拟仓库组织结构的博弈分析

简要介绍了军事虚拟仓库及其组织结构形式．以及博弈论的相关知识。结合军事后勤系统的特点,采用完全信息静态博弈纳什均衡的方法分析了军事虚拟仓库的组织结构模式,在假设的合理的条件下模拟3种组织形式的博弈过程。通过各个模型的最终纳什均衡,指出了3种组织结构形式运作的结果和其积极因素、消极因素、噪声构成．结合我军现有的后勤保障体制,提出现行保障体制的合理与不合理的地方,并给出了改进方案,对优化全军后方仓库布局及管理和战备物资储备及应急保障有着重要意义,可以为总部决策提供咨询建议。     

弹道导弹打击航空母舰末制导寻的方法研究

在弹道导弹与航母战斗群的攻防对抗中,弹道导弹需要采用有效的寻的方法以便在对抗中占优势。通过分析航母的运动特性,建立了预测其运动态势的数学模型;在此基础上,采用预测落点的末制导方法,在导弹弹头再入大气层后,通过多次预测和修正,实时修正由于航母运动和再入过程中大气影响等各种干扰因素所引起的落点偏差,以保证弹头能以较好的精度命中目标。从数字仿真结果来看,该方法成功率高,且制导精度较高,具有较强的工程应用价值。     

利用隔离模式实现千兆网卡双冗余功能

为保证网络系统各终端通信线路具有较高的抗毁性和可靠性,千兆网卡必须提供双冗余功能。介绍了GMⅡ接口,以及采用双通道方案,如何利用PHY芯片的隔离模式来实现千兆网卡的双冗余功能。给出了一个具体设计方案,仿真结果表明,该项设计成果可直接用于军用以太网的升级换代。     

改进的接触算法及其在光滑粒子流体动力学中的应用

采用以黎曼解描述粒子间相互作用的接触算法,模拟一维情况下包含间断的流场。在弱间断的条件下,采用弱波近似的黎曼解来描述粒子间的相互作用;在强间断的条件下,则引入非迭代黎曼解来描述粒子间的相互作用。并引入Taylor展开思想,提高了接触算法在自由边界的计算精度。该算法无需引入人为粘性,程序结构简洁。数值计算表明,改进后的接触算法能很好地描述强间断,并有效改善了原始接触算法在自由面的计算缺陷。     

基于生物视觉原理的图像结构信息变化检测方法

为克服多时相遥感图像变化检测中照度差异和配准误差的影响,采用边缘结构信息进行变化检测。利用多方向Gabor函数从图像梯度强度图中提取边缘结构信息,称之为边缘标记(Edge Tag,ET),通过比较多时相遥感图像中ET的互相关系数实现变化检测。为减小差异较小的边缘对检测结果的影响,在相关系数的计算中引入抑制因子。仿真图像和真实图像的实验结果表明,该方法能克服图像照度差异和配准误差对变化检测的影响,取得了较好的检测效果。     

利用混合编程改善SMP机群上并行矩阵乘法的性能

针对SMP机群,探讨了分别利用单机优化、OpenMP与MPI从指令级、共享存储级与分布主存级三个层次上改善矩阵并行乘Fox算法性能的方法。并通过调用数学函数库与混合编程的方式,在深腾6800上进行了实验,取得了相当满意的数值效果。