Multi-objectives nonlinear structure optimization for actuator in trajectory correction fuze subject to high impact loadings

This paper presents an actuator used for the trajectory correction fuze, which is subject to high impact loadings during launch. A simulation method is carried out to obtain the peak-peak stress value of each component, from which the ball bearings are possible failures according to the results. Subsequently, three schemes against impact loadings, full-element deep groove ball bearing and integrated raceway, needle roller thrust bearing assembly, and gaskets are utilized for redesigning the actuator to effectively reduce the bearings' stress. However, multi-objectives optimization still needs to be conducted for the gaskets to decrease the stress value further to the yield stress. Four gasket's structure parameters and three bearings' peak-peak stress are served as the four optimization variables and three objectives, respectively. Optimized Latin hypercube design is used for generating sample points, and Kriging model selected according to estimation result can establish the relationship between the variables and objec-tives, representing the simulation which is time-consuming. Accordingly, two optimization algorithms work out the Pareto solutions, from which the best solutions are selected, and verified by the simulation to determine the gaskets optimized structure parameters. It can be concluded that the simulation and optimization method based on these components is effective and efficient.     

Visual SLAM in dynamic environments based on object detection

A great number of visual simultaneous localization and mapping (VSLAM) systems need to assume static features in the environment. However, moving objects can vastly impair the performance of a VSLAM system which relies on the static-world assumption. To cope with this challenging topic, a real-time and robust VSLAM system based on ORB-SLAM2 for dynamic environments was proposed. To reduce the influence of dynamic content, we incorporate the deep-learning-based object detection method in the visual odometry, then the dynamic object probability model is added to raise the efficiency of object detection deep neural network and enhance the real-time performance of our system. Experiment with both on the TUM and KITTI benchmark dataset, as well as in a real-world environment, the results clarify that our method can significantly reduce the tracking error or drift, enhance the robustness, accuracy and stability of the VSLAM system in dynamic scenes.     

带空气室脉冲水射流系统通用分析法

针对所提出的用空气室引发水力共振以增强脉冲水射流的设想,应用水力瞬变特征线解法,建立系统的数学模型,差分网格只取脉冲源、空气室和喷嘴3个边界点,采用变时步法解算。这种方法具有灵活性大、受限制小、便于使用的突出优点。     

电力市场环境下AGC的一种仿真方法

在电力市场环境下,AGC不仅要使系统频率保持稳定,而且要使各个发电单元输出电力满足市场合同要求。在现有AGC系统的基础上,对频率偏差的因子的取值进行了分析,建立起清晰、简明、便于分析的数学模型,直观地展现了系统内各个环节的相互关系,为AGC系统的运行和调整提供了数学依据;并通过对模型的计算机仿真,反映出不同情况下系统的动态性能和稳态性能。     

基于Kalman滤波对运动目标状态最优预测

给出了运动目标状态空间表达式,Kalman滤波递推公式及算例,实现了目标状态的滤波及预测,对于提高打击运动目标的精度,缩短火力反应时间及简化指挥程序具有较强的实践意义。     

多通道舰空导弹武器系统反导决策模型研究

当前水面舰艇面临着严重的反舰导弹威胁,特别是在饱和攻击的条件下,常规的单通道舰空导弹系统已经不能满足作战的需要。多通道舰空导弹武器系统具有同时引导多枚导弹拦截多批目标的能力,可以充分发挥系统的能力,相应的反导决策在防空作战中起到重要作用,反导决策的正确性和合理性直接影响防空作战效果。在对反导决策过程和制约因素进行分析的基础上,通过0-1决策模型,得到了舰空导弹武器反导的优化决策模型,较好地满足了使用多通道舰空导弹系统对多目标打击决策的合理性和有效性。     

舰空导弹引信发展趋势研究

简单描述了舰空导弹引信发展的历程,介绍了它的基本工作原理。根据未来海战场环境的特点,分析了舰空导弹引信发展的总体需求。从提高导弹引信的引战配合、抗干扰能力、可靠性三大技术指标的角度,着重论述了舰空导弹引信的8个研究方向,探析了未来舰空导弹引信及相关的技术的发展趋势。对我国发展舰空导弹引信提出了建议。     

某型舰炮火控系统建模与仿真

简要介绍了某型舰炮火控仿真系统的训练、教学和和科研功能设计方案,硬件组成和必需的软件模块.在对一批空中目标拦截的战术设定情况下,给出了作战仿真流程图,列出了我舰及目标运动状态和姿态、噪声仿真、系统解命中、射击效果在线评估等数学模型.最后指出在建立数学模型时新的跟踪机制、解命中体制和滤波外推算法是三个技术难点,而在仿真过程中必须注意分布式、可视化和时钟统一等关键技术.     

舰艇武器布置问题的一种协同优化算法

针对舰艇武器布置问题的特点,提出了一种基于粒子群优化和分类器系统的协同优化算法,以粒子群优化进行优化计算,用分类器系统消除约束.计算实例表明,该算法能较好地实现优化计算,并能节省大量的计算时间.     

L波段掺铒光纤放大器增益钳制及提高特性研究

报道了一种新型980 nm激光二极管(LD)泵浦高增益的掺铒光纤放大器(EDFA).通过加入中心波长为1 550 nm光纤光栅(FBG)可以明显提高增益,并分析了增益钳制的原理.实验得到其增益比无FBG结构EDFA提高8 dB,并得到了小信号输入时增益25 dB的有效钳制.