The unnecessary uprising: Jeju Island rebellion and South Korean counterinsurgency experience 1947–48

This paper systematically analyzes the causes of the escalation of violence during the initial stages of the Jeju Island Rebellion and the failure of South Korean counterinsurgency operations. It is argued that four interrelated factors provided the conditions for armed insurgency in the small island of Jeju: inter-agency tension between the Korean National Police (KNP) and the Korean Constabulary; the mainlanders' misinterpretation of the insurgency; the effect of systematic police brutality; and the role of youth groups. Consequently, two counterinsurgency lessons will be drawn from this study: that inter-agency cooperation and coordination at the tactical level between security branches and the incorporation of local population at the micro-level is essential in conducting efficient and effective counterinsurgency operations.     

燃烧加热型煤油加热器工作特性试验

针对冲压发动机地面试验应用需求,设计了基于燃气加热方式的煤油加热器,通过试验的方法研究了多个因素对其工作特性的影响规律。研究结果表明,该煤油加热器加热能力强,响应时间短,可在线制备超临界/裂解态煤油;其中,燃气温度、流量和煤油流量是影响煤油加热器工作特性的主要因素,通过控制燃气温度和流量可以大范围调节煤油温度,能满足冲压发动机不同试验工况的应用需求。     

基于HLA的防区外空面导弹攻防对抗仿真

针对HLA/RTI在接口规范、对象模型模板等关键技术建立分布式仿真平台的复杂性,提出了利用数字武器开发平台进行开发的方法,构建防区外空面导弹攻防对抗系统体系结构,实现了该体系结构联邦成员划分、设计联邦/仿真对象模型表等HLA仿真关键技术,并采用面向对象建模与仿真技术建立了各联邦成员的数学模型.该仿真结果表明,各联邦成员的数学模型与底层支撑环境能够相互分离,仿真模型具有良好的交互性和互操作性,可通过添加或删除联邦成员仿真不同的复杂战场想定,并可作为验证不同算例的仿真平台.     

Investigation of the shock compression behaviors of Al/PTFE composites with experimental and a 3D mesoscale-model

The responses of AI/PTFE reactive materials (RMs) under shock compression were investigated by a single-stage gas gun.A 3D mesoscale-model was established based on micro-computed tomography(micro-CT) slice images and confirmed with experimental results.In the high-pressure stage,the com-posites reacted partially,whereas there were no deviations between the partially reacted Hugoniot and the inert simulation results.The simulation reveals that the Teflon matrix melting on the high shock pressure.Melts and decomposition of the PTFE accelerated the diffusion of the atoms.Thus,the reactions of the Al/PrFE composites are more like a combustion rather than a detonation.     

Investigating the Desirability of Navy Aircraft Service Life Extension Programs

Building on prior work on optimal replacement of aging aircraft, this paper presents three methodologies to evaluate prospective aviation Service Life Extension Programs (SLEPs) and applies these methodologies to US Navy F/A-18E/F data. While considerable uncertainty remains as to the values of key parameters (e.g. the cost of F/A-18E/F SLEPs), the preponderance of the evidence available at this juncture favors undertaking SLEPs on F/A-18E/Fs rather than replacing them with new Joint Strike Fighters.     

基于FEM/SPH算法的弹丸侵彻土体数值模拟

基于有限元法(FEM)和光滑粒子流体动力学(SPH)结合的算法,用数值模拟了钢质弹丸对钢筒约束土体的侵彻过程。基于ANSYS/LS-DYNA显式动力分析和LS-PrePost后处理软件,形象再现了钢质弹丸冲击作用下土体飞溅形成漏斗坑和直线通道的物理过程。侵彻深度计算结果与实验数据吻合较好,钢质弹丸的速度和加速度时程曲线图与理论分析一致,体现了FEM/SPH算法的精确性。研究结果表明FEM/SPH算法在模拟侵彻土体方面具有可行性和有效性。     

基于敏感性分析的DF化学动力学模型的简化

基于两种燃料体系下的DF详细化学反应动力学模型,利用敏感性分析的方法,分别提出了相应的简化反应机理.简化过程中发现,仅考虑DF“冷反应”泵浦过程,忽略掉高振动激发态,忽略掉D2和DF分子的离解复合反应对整个系统影响不大.DF分子之间以及DF与D、D2、HF之间的能量转移反应具有较高的敏感性.简化机理在有效概括DF化学反...     

N2O/C7H8单喷嘴燃气发生器试验研究

以基于N2O/C7H8的燃烧驱动混合型气动CO2激光器点火试验为研究背景,设计了液态N2O供应系统及N2O/C7H8单喷嘴燃气发生器.对液态N2O供应系统、N2O/C7H8的点火及燃烧性能进行了研究.试验结果表明:设计的N2O供应系统能够实现液态N2O的稳定供应;在设定的时序下,两个设计工况(余氧系数分别为0.3和0....     

切向空气气流对激光辐照碳纤维复合材料的影响

实验研究了靶材表面存在和不存在切向空气气流时,975nm连续激光对碳纤维增强树脂基复合材料的辐照效应,发现切向气流的加载有利于激光对碳纤维复合材料的破坏.从理论上对激光辐照下碳纤维复合材料的破坏机理进行了初步分析,基于碳的氧化特性和氧化反应机理,推导了碳纤维的氧化速率方程.采用改进的光滑粒子方法,对激光辐照下复合材料树...     

低温推进剂供应管道系统充填过程的动力学模型

研究了低温推进剂液体火箭发动机供应管道系统充填过程的建模问题。低温推进剂的充填相变过程采用均相模型,对推进剂充填管道系统进行有限元分割,应用基本守恒定律于充满推进剂的单元和充满气体的单元,两相单元采用等效流容方程,建立了低温推进剂管道充填过程的有限元状态变量模型。充填的容腔视为两相单元,建立了其动力学模型。利用本文的模型,对液氢、液氧推进剂的管道充填过程进行了仿真计算,给出了有关计算结果。