混合气体识别的响应等效性与瞬态信号正交分解模型

针对目前混合气体识别大多采用传感器稳态响应信号、基于线性混合假设或大量样本学习,而瞬态响应信号特征分析主要应用非正交分解的问题,提出一种基于响应等效性与瞬态信号正交分解的混合气体识别模型。分析金属氧化物半导体传感器对混合气体的响应特性,建立基于气体响应成分等效性假设的气体非线性混合模型,在此基础上,提出并应用一种新的正交基函数——扩展类Legendre正交基,对气体传感器瞬态响应信号进行分解;通过对正交分解系数与气体浓度的回归分析,验证二者之间的指数型关联关系,并以正交分解系数为特征参数,利用气体非线性等效混合模型对混合气体分解与辨识。实验结果表明,尽管这种混合气体识别模型仅用单一气体检测的先验知识,对混合气体的识别误差仍可达到15%以内。     

How and why Boko Haram blossomed: examining the fatal consequences of treating a purposive terrorist organisation as less so

Boko Haram (BH) is an insurgent group that operates mainly in northeastern Nigeria. Its stated aim is to establish an Islamic state, and it employs terrorism as its strategy. Earlier interests of security analysts centred on the drivers of BH uprising and the possibility of its internationalisation. Today's concerns relate more to why the rebellion has lasted this long. In toeing the same line, this article demonstrates that BH is a purposive terror group against which the government has evolved no viable strategy. It examines some gains of BH over the past six years and how it benefitted from the government's underestimation of its capacity and determination. It concludes that to effectively engage BH, the Nigerian government must revaluate its threat and sincerely pursue an expanded strategy beyond the current military-centric approach. To be effective, government's response must be packaged in such a way as to enhance human security in the region.     

基于频响函数的悬臂结构损伤识别

根据频响函数的Neumann级数展开式,提出了悬臂结构的损伤识别方法。首先根据频响函数的Neumann级数展开式,推导了损伤参数与频响函数的关系式,以此为基础建立损伤识别方程组;其次,考虑到噪声影响,求解时采用了多频率点的最小二乘法,以减小由噪声引起的误差;最后用一个悬臂结构模型对所提方法进行了验证。     

高超声速飞行器纵向平面滑翔飞行制导控制方法

针对高超声速飞行器纵向平面内准平衡滑翔制导控制问题,提出一种基于动态面控制和滑模控制的制导与姿态控制系统设计方法。建立高超声速飞行器纵向平面质心和绕质心运动模型,以航程预测-校正控制为出发点得到期望速度倾角并结合飞行器纵向模型中速度倾角、攻角和俯仰角速率间的关系,利用动态面控制方法、终端滑模控制和二阶滑模控制方法完成高超声速飞行器纵向平面内制导与姿控系统设计。基于偏导系数矩阵形式的通用高超声速飞行器气动模型,完成期望攻角和左右升降舵偏角指令的解析计算。通过高超声速飞行器对该制导控制系统设计方法的有效性和鲁棒性进行仿真验证。根据数值仿真结果,系统阐述了高超声速飞行器进入准平衡滑翔飞行前后制导控制系统工作的特点,进而总结了从初始下降段到准平衡滑翔段交班飞行阶段制导控制系统设计需要注意的问题。     

Dynamic globularization prediction during cogging process of large size TC11 titanium alloy billet with lamellar structure

The flow behavior and dynamic globularization of TC11 titanium alloy during subtransus deformation are investigated through hot compression tests. A constitutive model is established based on physical-based hardening model and phenomenological softening model. And based on the recrystallization mechanisms of globularization, the Avrami type kinetics model is established for prediction of globularization fraction and globularized grain size under large strain subtransus deformation of TC11 alloy. As the preliminary application of the previous results, the cogging process of large size TC11 alloy billet is simulated. Based on subroutine development of the DEFORM software, the coupled simulation of one fire cogging process is developed. It shows that the predicted results are in good agreement with the experimental results in forging load and microstructure characteristic, which validates the reliability of the developed FEM subroutine models.     

Reduction of global effects on vehicles after IED detonations

Global effects caused by the detonation of an IED near a military vehicle induce subsequent severe acceleration effects on the vehicle occupants. Two concepts to minimize these global effects were developed, with the help of a combined method based on a scaled experimental technology and numerical simulations. The first concept consists in the optimization of the vehicle shape to reduce the momentum transfer and thus the occupant loading. Three scaled V-shaped vehicles with different ground clearances were built and compared to a reference vehicle equipped with a flat floor. The second concept, called dynamic impulse compensation (DIC), is based on a momentum compensation technique. The principal possibility of this concept was demonstrated on a scaled vehicle. In addition, the numerical simulations have been performed with generic full size vehicles including dummy models, proving the capability of the DIC technology to reduce the occupant loading.     

基于VAR的物价对舰船维修工时费率影响的动态计量分析

在相关性、平稳性和协整性检验基础上,建立舰船维修工时费率与物价之间的VAR模型,并借助Granger因果关系检验、脉冲响应函数分析和方差分解对模型进行动态分析.研究发现:物价与舰船维修工时费率之间存在长期均衡关系,两者互为Granger原因;工时费率会对物价变化产生及时的正向响应,并具有长效性,短期内工时费率受自身惯性的影响较大,随后物价对其影响的贡献率迅速上升,达到与其自身惯性相近的均衡状态;物价对工时费率变化的响应有1 a的时滞,且响应程度相对较小.长期来看,两者相互影响的关系使得工时费率呈波动上升的趋势.     

分布式约束优化问题及其求解算法

分布式约束优化问题(DCOP)能够对多智能体系统(MAS)中的各种分布式推理任务进行建模,广泛应用于分布式规划、调度、资源分配等问题中。首先从DCOP的概念出发,引入一个典型的DCOP实例,在此基础上对DCOP问题求解的两类主流算法进行了详细介绍和比较分析。针对DCOP对现实问题建模中出现的部分集中式、硬约束、开放式、隐私和anytime等5个方面的问题进行了阐述,并介绍了相应的扩展算法。在动态实时问题,自稳定性与误差容错以及在物理分布式环境下仿真等问题仍需进一步研究。     

遗传算法的经验公式仿真元模型构建方法

针对组合模型的构建问题,从子模型的操作系统、开发平台、表现形式、硬件环境等4方面分析了采用经验公式仿真元模型的必要性;在均匀试验基础上,提出了基于遗传算法的经验公式仿真元模型构建方法,并研究了其中的关键问题,包括经验公式基本形态的编码方式、目标函数与适应度函数、交叉算子、选择算子、变异算子;最后采用经验公式仿真元模型研...     

质量块控制自旋导弹的Lyapunov稳定性分析

给出了质量矩控制导弹的动力学模型及在一定条件下的简化动力学模型;用Lyapunov分析方法给出了动稳定性条件。结果说明,推力和静稳定度越大,越有利于动态稳定;阻力越大越不利于动态稳定。