Performance study of jute-epoxy composites/sandwiches under normal ballistic impact

This study is undertaken to explore the use of natural fiber Jute-epoxy (JE), Jute-epoxy-rubber (JRE) sandwich composite for ballistic energy absorption. Energy absorbed and residual velocities for these composites are evaluated analytically and through Finite Element Analysis (FEA). FE analysis of JE plates is carried out for different thicknesses (3, 5, 10 and 15 mm). JE plates and JRE sandwiches having the same thickness (15 mm) are fabricated and tested to measure residual velocity and energy absorbed. The analytical results are found to agree well with the results of FE analysis with a maximum error of 9%. The study on JE composite plate reveals that thickness influences the energy absorption. Experimental and FE analysis study showed that JRE sandwiches have better energy absorption than JE plates. Energy absorption of a JRE sandwich is about 71% greater than JE plates. Damages obtained from FEA and testing are in good agreement. SEM analysis confirms composites failed by fiber rupture and fragmentation.     

Investigation on energy output structure of explosives near-ground explosion

In order to give the energy output structure of typical explosives near-ground explosion in real ground conditions, the free-field shockwave, ground reflection shockwave and Mach wave overpressure time history of composition B explosive, RDX explosive and aluminized explosive were measured by air pressure sensors and ground pressure sensors. The shape of the free-field shock wave, ground reflection shock wave, and Mach wave and explosion flame were captured by high-speed camera. The experimental results show that, at the same horizontal distance from the initiation point, the peak overpressure of explosive shock wave of composition B explosive, both in the air and on the ground, is less than that of RDX and aluminized explosives. At a distance of 3.0 m from the initiation point, the peak overpressure of aluminized explosives is slightly less than that of RDX explosives. Owing to the exothermic effect of aluminum powder, the pressure drop of aluminized explosives is slower than that of RDX explosives. At 5.0 m from the initiation point, the peak overpressure of aluminized explosives is larger than that of RDX explosives. At the same position from the initiation point, among the three kinds of explosives, the impulse of aluminized explosives is the maximum and the impulse of composition B explosives is the minimum. With the increase of the horizontal distance from the initiation point, the height of Mach triple-points (Mach steam) of the three explosives increases gradually. At the same horizontal distance from the initiation point, there is poorly difference in the height of Mach triple-points between aluminized explosive and RDX explosive, and the height of Mach triple-points of composition B explosive is much smaller than that of other two explosives. The maximum diameter and duration of the fireball formed by aluminized explosives are the largest, followed by composition B explosive, and the maximum diameter and duration of the fireball formed by RDX explosive are the smallest.     

高频雷达多波束最优天线方向图综合

在高频雷达中 ,多个部分重叠的波束被用来形成对预定空域的覆盖 ,而射频干扰和期望信号的空间结构之间的差异以及接收天线阵列的空间多样性则被用来抑制干扰以提高高频雷达的整体工作性能。然而如何在实时地形成多波束的同时有效地抑制射频干扰仍然是高频雷达一个急待解决的问题。基于最优天线方向图综合方法 ,通过主瓣形状保持和干扰抑制之间的合理折衷进一步提出了多波束形成算法。仿真结果表明该算法可以快速、灵活地形成多个波束来覆盖预定的空域 ,同时最大限度地抑制射频干扰 ,从而极大地提高了高频雷达的工作性能     

基于HLA仿真的装备采办体系需求论证研究

在简单介绍基于仿真的采办和高层体系结构基本概念的基础上 ,针对我军装备采办的特点和要求 ,以陆军装备自行高炮为例 ,提出了应用高层体系结构仿真技术加强装备论证研究中体系需求的技术方法     

分析仿真联邦多次运行机制研究

为提高运行效率和降低操作强度,提出了分析仿真联邦运行控制框架,以及重新创建联邦、成员一次加入联邦、成员多次加入联邦3种多次运行机制,并分析了各自的优缺点。采用成员多次加入联邦方法构建了分析仿真联邦多次运行控制原型系统,验证了该机制的合理性和可行性。研究成果适用于不同类型和层次的分析仿真联邦。     

H-PRF方式地面情报雷达杂波抑制性能分析

针对提高地面情报雷达杂波抑制性能的问题,在阐述PD体制信号处理的基础上,主要结合与传统的L-PRF方式对比,对应用H-PRF方式PD体制信号处理的改善因子进行了分析论证.