高重合度人字齿轮传动动态性能优化设计

对人字齿轮传动进行高重合度设计的分析,基于人字齿轮副承载接触分析技术,针对人字齿轮传动中主动小齿轮轴向浮动安装的特点,综合考虑齿轮时变啮合刚度、啮合冲击激励及误差激励等因素的影响,采用集中质量法建立了考虑修形的人字齿轮副弯-扭-轴耦合非线性振动模型,推导了系统无量纲运动微分方程,求解得到齿轮传动系统的振动加速度。以齿轮的振动加速度均方根值为优化的目标函数,针对该类复杂实际工程优化设计中适应值计算费时的缺点,提出了一种改进的具有适应值预测机制的遗传算法,优化得到了人字齿轮的基本设计参数及修形参数,提高了计算效率,通过实例分析验证了该优化方法的有效性。对加工的人字齿轮在减振降噪试验台上进行带载试验,对比优化前后的噪音分贝值,进一步验证了该优化方法对齿轮副减振降噪具有一定作用。     

电离层色散特性对导航信号接收的影响

电离层是一种典型的色散介质,会对导航信号产生延迟,且不同频点处的电离层延迟互不相同。实际应用中通常只考虑接收信号中心频点处的电离层延迟,而忽略信号带宽范围内的电离层色散特性。建立了电离层色散特性的对导航信号接收的影响分析模型,并定量地分析了电离层色散效应对BPSK(10)、BOC(14,2)以及AltBOC(15,10)等宽带导航信号的影响。分析表明电离层色散效应对BPSK(10)信号的影响可忽略不计,对高阶BOC信号会产生一定程度的与电离层特性相关的相关损耗及载波跟踪偏差,其中AltBOC(15,10)产生的相关损耗最高约1.4dB,载波相位跟踪偏差最高约0.374π。     

基于网络组织有序度的指挥体系优化算法

针对信息化条件下指挥体系结构的特点,运用复杂网络理论,提出了指挥体系的优化算法,将组织有序度最大化作为目标函数,以边的关键度作为调节变量,构建了优化模型和算法,并对指挥网络进行了实例分析,对比优化前后指挥体系在平均路径、聚类系数、度分布以及网络的抗毁性等指标上变化,最后得到最优化的指挥网络。该算法对指挥流程的优化具有一定的参考价值和指导意义。     

On the application and extension of system signatures in engineering reliability

Following a review of the basic ideas in structural reliability, including signature‐based representation and preservation theorems for systems whose components have independent and identically distributed (i.i.d.) lifetimes, extensions that apply to the comparison of coherent systems of different sizes, and stochastic mixtures of them, are obtained. It is then shown that these results may be extended to vectors of exchangeable random lifetimes. In particular, for arbitrary systems of sizes m < n with exchangeable component lifetimes, it is shown that the distribution of an m‐component system's lifetime can be written as a mixture of the distributions of k‐out‐of‐n systems. When the system has n components, the vector of coefficients in this mixture representation is precisely the signature of the system defined in Samaniego, IEEE Trans Reliabil R–34 (1985) 69–72. These mixture representations are then used to obtain new stochastic ordering properties for coherent or mixed systems of different sizes. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

规范火场战斗秩序的实践与思考

分析当前火场战斗秩序混乱的原因，从火灾现场排兵布阵、灭火救援绩效考评和人才保障等方面提出了规范火场战斗秩序，提高灭火实战能力的相应对策。     

Properties of some stochastic orders: A unified study

The notions of the likelihood ratio order of degree s (s ≥ 0) are introduced for both continuous and discrete integer‐valued random variables. The new orders for s = 0, 1, and 2 correspond to the likelihood ratio, hazard rate, and mean residual life orders. We obtain some basic properties of the new orders and their up shifted stochastic orders, and derive some closure properties of them. Such a study is meaningful because it throws an important light on the understanding of the properties of the likelihood ratio, hazard rate, and mean residual life orders. On the other hand, the properties of the new orders have potential applications. © 2003 Wiley Periodicals, Inc. Naval Research Logistics, 2004.     

一种高阶累积量的模态参数辨识方法改进及其应用

高阶累积量的模态参数辨识方法能够消除高斯噪声的影响。但基于传统的高阶累积量降阶方法的子空间模态参数辨识方法具有一定的缺陷。为此,提出2种降阶方法用于高阶累积量的子空间模态参数辨识方法,并对这2种方法进行了比较。利用主切片方法对某变截面轴进行了模态参数识别,获得了与有限元法相一致的计算结果,从而证明了该方法的可靠性。该方法的辨识质量较高,能够用于一般结构的模态参数辨识。     

二级库存-运输系统的联合经济订购模型

结合器材供应的实际,构建了一个国家仓库-地区仓库形成的二级库存-运输系统,以最低费用为目标,建立了该系统的联合经济订购模型,求解了该系统各仓库的最佳订货量和订货次数;运用该模型对3种订货策略（年度1次订货、年度多次订货、零库存订货）进行了算例验证,表明了该模型在优化多级库存运输系统订货参数方面的意义。     

Stein–Chen approximation and error bounds for order fill rates in assemble‐to‐order systems

Assemble‐to‐order (ATO) is an important operational strategy for manufacturing firms to achieve quick response to customer orders while keeping low finished good inventories. This strategy has been successfully used not only by manufacturers (e.g., Dell, IBM) but also by retailers (e.g., Amazon.com). The evaluation of order‐based performance is known to be an important but difficult task, and the existing literature has been mainly focused on stochastic comparison to obtain performance bounds. In this article, we develop an extremely simple Stein–Chen approximation as well as its error‐bound for order‐based fill rate for a multiproduct multicomponent ATO system with random leadtimes to replenish components. This approximation gives an expression for order‐based fill rate in terms of component‐based fill rates. The approximation has the property that the higher the component replenishment leadtime variability, the smaller the error bound. The result allows an operations manager to analyze the improvement in order‐based fill rates when the base‐stock level for any component changes. Numerical studies demonstrate that the approximation performs well, especially when the demand processes of different components are highly correlated; when the components have high base‐stock levels; or when the component replenishment leadtimes have high variability. © 2012 Wiley Periodicals, Inc. Naval Research Logistics, 2012     

高动态环境下BFSK信号的快速解调算法

提出了一种适用于高动态环境下,BFSK信号的快速解调算法。该算法基于FFT频率引导和改进的正交锁相环,利用FFT实现对接收信号的快速捕获,利用改进的正交锁相环对接收信号进行动态跟踪。仿真结果表明在高动态环境中该算法可以快速、准确解调BFSK信号。