分布式防空C3I模型信息关系及其交互关键技术研究

对分布式防空C3I仿真中信息交互关键技术进行了研究。分析了各子模型信息关系,研究了信息有效交互的途径和提高信息交互速度的方法,并对组播通信组的划分方法进行了深入研究,提出了基于信息流的组播通信组的划分方法。     

用于无线ATM的协议及方法分析

ＷＡＴＭ 被认为是下一代个人通信网络的解决方案,或是Ｂ－ＩＳＤＮ 网络的无线延伸。目前无线ＡＴＭ 仍处于发展初期,ＡＴＭ 论坛和ＩＴＵ－Ｔ 都未制定正式标准,研究人员正在建立实验性的Ｗ ＡＴＭ 网络,并在其上面实验各种不同的协议。ＡＴＭ 类的无线网络将在未来的宽带通信网中扮演一个重要的角色     

指挥控制通信与情报(C3I)系统的评价

综述了目前用于评价Ｃ３Ｉ系统的各类方法与过程,讨论了Ｃ３Ｉ系统的评价框架,并对这个框架下的各种评价方法与过程的长处和不足提出了作者的看法     

Performance analysis of queue length monitoring of M/G/1 systems

This study investigates the statistical process control application for monitoring queue length data in M/G/1 systems. Specifically, we studied the average run length (ARL) characteristics of two different control charts for detecting changes in system utilization. First, the nL chart monitors the sums of successive queue length samples by subgrouping individual observations with sample size n. Next is the individual chart with a warning zone whose control scheme is specified by two pairs of parameters, (upper control limit, d_u) and (lower control limit, d_l), as proposed by Bhat and Rao (Oper Res 20 (1972) 955–966). We will present approaches to calculate ARL for the two types of control charts using the Markov chain formulation and also investigate the effects of parameters of the control charts to provide useful design guidelines for better performance. Extensive numerical results are included for illustration. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

Periodic review inventory management with contingent use of two freight modes with fixed costs

We study a stochastic inventory model of a firm that periodically orders a product from a make‐to‐order manufacturer. Orders can be shipped by a combination of two freight modes that differ in lead‐times and costs, although orders are not allowed to cross. Placing an order as well as each use of each freight mode has a fixed and a quantity proportional cost. The decision of how to allocate units between the two freight modes utilizes information about demand during the completion of manufacturing. We derive the optimal freight mode allocation policy, and show that the optimal policy for placing orders is not an (s,S) policy in general. We provide tight bounds for the optimal policy that can be calculated by solving single period problems. Our analysis enables insights into the structure of the optimal policy specifying the conditions under which it simplifies to an (s,S) policy. We characterize the best (s,S) policy for our model, and through extensive numerical investigation show that its performance is comparable with the optimal policy in most cases. Our numerical study also sheds light on the benefits of the dual freight model over the single freight models. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

Analysis of decentralized multi‐product pull systems with lost sales

We study a pull‐type, flexible, multi‐product, and multi‐stage production/inventory system with decentralized two‐card kanban control policies. Each stage involves a processor and two buffers with finite target levels. Production stages, arranged in series, can process several product types one at a time. Transportation of semi‐finished parts from one stage to another is performed in fixed lot sizes. The exact analysis is mathematically intractable even for smaller systems. We present a robust approximation algorithm to model two‐card kanban systems with batch transfers under arbitrary complexity. The algorithm uses phase‐type modeling to find effective processing times and busy period analysis to identify delays among product types in resource contention. Our algorithm reduces the effort required for estimating performance measures by a considerable margin and resolves the state–space explosion problem of analytical approaches. Using this analytical tool, we present new findings for a better understanding of some tactical and operational issues. We show that flow of material in small procurement sizes smoothes flow of information within the system, but also necessitates more frequent shipments between stages, raising the risk of late delivery. Balancing the risk of information delays vis‐à‐vis shipment delays is critical for the success of two‐card kanban systems. Although product variety causes time wasted in setup operations, it also facilitates relatively short production cycles enabling processors to switch from one product type to another more rapidly. The latter point is crucial especially in high‐demand environments. Increasing production line size prevents quick response to customer demand, but it may improve system performance if the vendor lead‐time is long or subject to high variation. Finally, variability in transportation and processing times causes the most damage if it arises at stages closer to the customer. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

Quantifying the performance effects of idle time utilization in multiserver systems

In many practical multiserver queueing systems, servers not only serve randomly arriving customers but also work on the secondary jobs with infinite backlog during their idle time. In this paper, we propose a c‐server model with a two‐threshold policy, denoted by (e d), to evaluate the performance of this class of systems. With such a policy, when the number of idle servers has reached d (<c), then e (<d) idle agents will process secondary jobs. These e servers keep working on the secondary jobs until they find waiting customers exist in the system at a secondary job completion instant. Using the matrix analytic method, we obtain the stationary performance measures for evaluating different (e, d) policies. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2007.     

基于扩展Petri网的动态服务聚合流程描述模型及其BPEL4WS表示方法

针对现有服务聚合流程建模方法的不足,基于扩展Petri网提出了一种新的服务聚合流程/资源描述模型WSCP/R-net,有效解决了动态服务聚合流程模型中不确定路径选择和服务的动态变化性问题。给出了WSCP/R-net模型向BPEL4WS的转换算法,并以城市应急处理为例说明了转换算法的有效性。     

用毁伤概率指标优化二点源诱饵系统布阵

两点源诱偏系统是应用有源干扰的方式,利用反辐射导弹(ARM)本身的缺陷来对反辐射导弹的导引头进行干扰,从而达到保护主战雷达目的的一种有源干扰系统。主要从反辐射导弹的基本原理和有源诱偏的概念入手,对两点源诱偏系统进行理论推导、数学建模、布站设想,后引入毁伤概率指标对各种布站方式进行分类、仿真,对每一种仿真结果进行分析、评估,再把各种分析结果加以比较,从中找出最佳的布站方式。最后利用以上的分析结果,得出几点有用的结论。     

采用滑模控制器提高稳定控制系统快速响应的研究

由于采用传统的稳定控制系统设计方法使得导弹弹体对不同大小指令信号响应的品质特性差异较大,因此主要研究了在传统的稳定控制系统设计方法的基础上,采用滑模变结构控制器来调节控制参数,较好地解决了稳定控制系统对大小指令信号时域响应特性差异较大的问题,提高了稳定控制系统的快速响应能力。