焊接钢质药筒与引伸药筒内弹道设计一致性研究

装备内弹道的一致性对其性能影响较大。经过长期对多个弹种用药筒的设计、使用和考核,发现用药筒在膛内容积一致性来进行弹道一致性设计比较适用和相对准确,同时发现挤进压力为P_0时的真实容积对内弹道一致性影响较大。此外焊接钢质药筒的内弹道一致性不仅达到了引伸药筒的要求,而且在或然误差和内弹道稳定性方面优于引伸药筒。     

金属圆管内爆轰波对碰部位速度的影响因素

利用LS-DYNA动力有限元程序对张世文等人做的金属圆管内爆轰波相互作用效应实验进行数值模拟,其模拟结果与实验结果具有较好的一致性。在此基础上着重分析了装药和金属圆管壁厚对金属圆管内爆轰波对碰部位速度的影响规律,为弹丸的设计提供了参考。     

高压下激波波阵面温升的计算

针对高压气体管路中的激波现象,建立了激波波阵面温升的计算模型,模型中考虑了高压气体中声速的变化对激波波阵面温升的影响．     

Shock initiation performance of NTO-based polymer bonded explosive

3-nitro-1,2,4-tri-azol-5-one (NTO) is a high energy insensitive explosive. To study the shock initiation process of NTO-based polymer bonded explosive JEOL-1 (32%octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX), 32% NTO, 28% Al and 8% binder system), the cylinder test, the gap experiments and numerical simulation were carried out. Firstly, we got the detonation velocity (7746 m/s) and the parameters of Jones-Wilkins-Lee (JWL) equation of state (EOS) for detonation product by cylinder test and numerical simulation. Secondly, the Hugoniot curve of unreacted explosive for JEOL-1 was obtained calculating the data of pressure and time at different Lagrangian positions. Then the JWL EOS of unreacted explosive was obtained by utilizing the Hugoniot curve as the reference curve. Finally, we got the pressure growth history of JEOL-1 under shock wave stimulation and the parameters of the ignition and growth reaction rate equation were obtained by the pressure-time curves measured by the shock-initiation gap experiment and numerical simulation. The determined trinomial ignition and growth model (IG model) parameters can be applied to subsequently simulation analysis and design of insensitive ammunition with NTO-based polymer bonded explosive.     

多重网格法求解静电像管三维电场的若干问题研究

详细讨论了多重网法数值求解三维静电场的若干数学问题,诸如三维多重网格法的限制与延拓公式推导、确定静电像管三维电子光学系统中的锥面电极、圆筒电极、球面电极、圆孔膜片电极、孔电极等的空间位置及范围的方法、以及迭代计算的逻辑尺编码方法等,为像管电子光学系统设计及优化设计奠定了良好基础.     

潜艇内置推进系统水动力设计

为提高潜艇推进效率,降低潜艇阻力和噪声,提出了一种潜艇内王推进系统及其结构布局,初步建立了内置推进系统的理论分析方法和设计思路.对推进系统的管道进行了参数化设计,并借助计算流体力学软件,用体积力代替螺旋桨产生的力场,对不同管道参数下的潜艇周围及管道内部的流场进行了数值模拟,结果表明:增大管道的进口面积可以减小管道阻力,...     

Experimental and numerical study of the blast wave decrease using sandwich panel by granular materials core

Among the intrinsic properties of some materials, e.g., foams, porous materials, and granular materials, are their ability to mitigate shock waves. This paper investigated shock wave mitigation by a sandwich panel with a granular core. Numerical simulations and experimental tests were performed using Autodyn hydro-code software and a shock tube, respectively. The smoothed particle hydrodynamics (SPH) method was used to model granular materials. Sawdust and pumice, whose properties were determined by several compression tests, were used as granular materials in the sandwich panel core. These granular materials possess many mechanisms, including compacting (e.g., sawdust) and crushing (e.g., pumice) that mitigate shock/blast wave. The results indicated the ineffectiveness of using a core with low thickness, yet it was demonstrated to be effective with high thickness. Low-thickness pumice yielded better results for wave mitigation. The use of these materials with a core with appropriate core reduces up to 88% of the shock wave. The results of the experiments and numerical simulations were compared, suggesting a good agreement between the two. This indicates the accuracy of simulation and the ability of the SPH method to modeling granular material under shock loading. The effects of grain size and the coefficient of friction between grains have also been investigated using simulation, implying that increasing the grain size and coefficient of friction between grains both reduce overpressure.     

Trajectory predictions of new lift separation sabots

This paper presents a modified analytical model to evaluate the trajectories of various lift separation sabot configurations. The aerodynamic forces acting on the sabot surfaces during a supersonic flight are modeled in the present analytical model by incorporating the pressures on the windward side of the sabot due to the detached/attached shock and its reflections and then integrated using the 3-DoF dynamical equations. The trajectory and the aerodynamic coefficients were obtained for these config-urations at a projectile Mach number of 3. The sabot configurations, which include two new designs, are compared with each other and with the conventional free flight trajectory data of the conventional sabots. The mechanical interaction between the sabot and projectile is also addressed in the present work. The comparison shows that the new designs with the aerodynamic surfaces close to the center of gravity, lift-off from the projectile with minimal mechanical interaction compared to a conventional sabot.     

铺层方式对碳/环氧管层间剪应力影响的有限元分析

利用有限元程序ANSYS7.0对软模膨胀成型制备的碳/环氧管件在轴向载荷下的层间剪应力进行了分析。表明铺层的不对称性会显著导致环向层间剪应力增大,增幅在0.43～1.14倍,但对轴向层间剪应力影响很小;碳/环氧管的轴向铺层和环向铺层的比例对轴向层间剪应力和环向层间剪应力有显著影响,其比例在7∶3～4∶1时可以有效降低碳/环氧管的层间应力。     

低速圆管流动的粒子仿真

运用信息保存法对低速圆管的流动现象进行了模拟,并与实验结果进行了比较,粒子仿真结果与实验结果吻合较好,且优于NS方程的结果。研究表明,在对低速圆管的模拟过程中,运用IP法在获得较好的结果的同时,具有比DSMC方法更高的计算效率。IP算法是解决低速圆管流动问题的有效途径。