T300和JC2#纤维增强C/SiC复合材料力学性能对比

以聚碳硅烷(PCS)为先驱体,采用聚合物浸渍裂解法(PIP)分别制备得到T300碳纤维和JC2#碳纤维增强C/SiC复合材料。JC2#C/SiC复合材料具有优异的力学性能,抗弯强度和断裂韧性分别达到662MPa和19.5MPa.m1/2;T300 C/SiC复合材料表现出低强度、高脆性,其抗弯强度和断裂韧性不足前者的四分之一。T300 C/SiC复合材料低性能的根本原因在于T300纤维在PCS裂解过程中性能严重下降,复合材料中纤维与基体间存在强界面结合是另一个影响因素。     

3mm波段混凝土屏蔽材料的研究

在混凝土中添加标准砂,钢纤维,铁晶矿砂,炭纤维毡,氧化锌晶须,铁氧体,乙炔碳黑,羰基铁粉等材料,制成了具有微波吸收性能的混凝土屏蔽材料,以期能探索一条大型建筑及军事掩体的电磁防护的新途径。在3mm波段范围内对混凝土屏蔽材料进行了初步的实验研究,研究了不同材料、不同掺量下电磁波的吸收衰减特性,并分析了它们之间的关系,为进一步的研究指明了方向。     

Effects of jute fibre content on the mechanical and dynamic mechanical properties of the composites in structural applications

Due to notable characteristics, sustainability concept and environmental issues, hybridisation natural with synthetic fibres to fabricate composites have been rapidly gaining market share in different applications (structural, military, aerospace and automotive vehicles). Compression, tension and fatigue tests of various stacking sequences of plain jute/carbon reinforced (PVB) polyvinyl butyral by hot hydraulic press technique were experimentally conducted. Six types of fabricated composites with various constituents (jute, carbon and their hybrids) were fabricated and tested. Notably, fatigue lifetime of hybrids increases with increasing the carbon content relative to the jute fibre content. On the other hand, Jute composites possess high strain compared to pure carbon composite, which gives an overall improvement in mechanical behaviours. Interestingly, H1 hybrid with Carbon/Jute/Carbon sequences offers similar fatigue stiffness behaviour of H3 hybrid with Carbon/Jute/Carbon/Jute sequences when subjected to cyclic loading. Carbon composite (C) exhibited the highest fatigue resistance, whiles jute composite (J) possessed the highest strain and semi brittle trends in both mechanical and fatigue performance. Results concluded that plain jute fibres could partially replace high-cost synthetic carbon fibres to produce more eco-friendly hybrids to be utilised in different composites industries.     

Effect of transverse compression on the residual tensile strength of ultrahigh molecular weight polyethylene (Dyneema® SK-76) yarns

Ballistic impact induces complex stress states on fiber-based armor systems. During impact fibers undergo multiaxial loading which includes axial tension, axial compression, transverse compression, and transverse shear. Transverse compression induced by the projectile leads to permanent deformation and fibrillation of fibers resulting in degradation of material tensile strength. Previous work (Sockalingam et al. Textile Res. J 2018) has shown a reduction of 20% in the tensile strength of Dyneema® SK76 single fibers subjected to 77% nominal transverse compressive strains. Experimental investigation of quasi-static transverse compression on Dyneema® SK-76 yarns, unconstrained in the lateral direction, indicate an average of 4% reduction in tensile strength of yarns compressed to 77% nominal strains. In this work we use finite element modeling techniques to understand the difference in residual tensile strength between single fibers and yarns observed in laterally unconstrained transverse compression experiments. Finite element study of the transverse compression response of single fibers and yarns indicate that local strains developed in fibers within the yarn are much lower than the local strains developed in single fibers subjected to a given nominal strain and may explain the less reduction in strength observed in yarns.     

FeAlCrNbB金属间化合物复合涂层的制备与表征

研究开发了一种FeAlCrNbB新型喷涂粉芯丝材,并结合自动化高速电弧喷涂工艺制备了该材料的复合涂层,分析了涂层的常规力学性能、组织结构和油润滑条件下的滑动摩擦磨损性能,并和常规FeAl涂层进行了对比。结果显示:FeAlCrNbB涂层具有相对较高的显微硬度和拉伸结合强度、低的孔隙率,组织致密,形成了由Fe-Al金属间化合物相、氧化物以及少量非晶和纳米晶组成的复合结构,由于这种复合结构的材料特征,使涂层具备较好的耐磨损性能。     

材料力学性能纳米压入测试仪器发展综述

综述了材料力学性能纳米压入测试仪器的发展现状。阐述了纳米压入测试技术的发展历程;从驱动、载荷测量和位移测量3方面对目前材料力学性能纳米压入测试仪器的基本结构进行了比较分析;介绍了材料力学性能纳米压入测试仪器集成技术,包括影响压入深度测量精度的集成技术、观测技术、大载荷模块和高温试验模块等;最后,对未来材料力学性能纳米压力测试仪器的发展趋势作了展望。