框支短肢剪力墙转换结构不同墙肢布置方式抗震试验研究

框支短肢剪力墙转换结构在实际工程中已得到广泛应用,但其理论研究尚需完善.在试验和分析的基础上,通过对不同墙肢布置方式的两榀斜柱式转换结构试件在竖向和水平荷载共同作用下受力机理、承载能力、破坏形态、滞回特性、变形能力、延性系数、抗震耗能以及破坏机制等抗震性能参数的分析和对比,揭示了墙肢布置方式变化对整个转换结构受力性能及...     

BFRP连续螺旋箍筋混凝土梁抗剪性能试验研究

为研究BFRP连续螺旋箍筋的抗剪性能,设计制作了6根配置BFRP连续螺旋箍筋的混凝土梁和2根配置矩形连续螺旋钢箍的对比混凝土梁.通过试验,得出了BFRP连续螺旋箍筋混凝土梁的抗剪性能,分析了配箍率、剪跨比和纵筋率等因素对构件抗剪性能的影响:构件的受剪破坏模式分为斜拉破坏和斜压破坏两种类型;在不同的受剪破坏模式下,斜裂缝...     

偏心加筋板大变形梁板单元

给出了偏心加筋板大变形分析的理论公式和相应的梁板单元模型 .在肋骨和板的运动方程中引用 Von Karman形变方程 ;按照 Mindlin板理论计及横向剪切变形的影响 ;对横向剪应变和薄膜应变重新插值修正克服 Mindlin型单元在薄板应用时的“锁定”行为 ,此模型可适合于薄板和厚板的非线性分析 .     

Bending and stress analysis of polymeric composite plates reinforced with functionally graded graphene platelets based on sinusoidal shear-deformation plate theory

The bending and stress analysis of a functionally graded polymer composite plate reinforced with gra-phene platelets are studied in this paper. The governing equations are derived by using principle of virtual work for a plate which is rested on Pasternak's foundation. Sinusoidal shear deformation theory is used to describe displacementfield. Four different distribution patterns are employed in our analysis. The analytical solution is presented for a functionally graded plate to investigate the influence of important parameters. The numerical results are presented to show the deflection and stress results of the problem for four employed patterns in terms of geometric parameters such as number of layers, weight fraction and two parameters of Pasternak's foundation.     

On vibration analysis of functionally graded carbon nanotube reinforced magneto-electro-elastic plates with different electro-magnetic conditions using higher order finite element methods

This article deals with evaluating the frequency response of functionally graded carbon nanotube rein-forced magneto-electro-elastic (FG-CNTMEE) plates subjected to open and closed electro-magnetic cir-cuit conditions. In this regard finite element formulation has been derived. The plate kinematics adjudged via higher order shear deformation theory (HSDT) is considered for evaluation. The equations of motion are obtained with the help of Hamilton's principle and solved using condensation technique. It is found that the convergence and accuracy of the present FE formulation is very good to address the vibration problem of FG-CNTMEE plate. For the first time, frequency response analysis of FG-CNTMEE plates considering the effect of various circuit conditions associated with parameters such as CNT dis-tributions, volume fraction, skew angle, aspect ratio, length-to-thickness ratio and coupling fields has been carried out. The results of this article can serve as benchmark for future development and analysis of smart structures.     

二维抛板极限速度的相似性与古尼公式的采用

本文分析影响被炸药驱动下抛板极限速度的重要因素,讨论了一些经验公式的适用范围;提出了根据二维抛板的数值计算得到的两个重要规律:①在炸药与抛板的质量比相同的情况下,抛板的极限速度之间具有一定的相似关系;②修正的古尼公式可用来计算二维抛板的极限速度。     

论短肢剪力墙的轴压比限值

在理论方面,短肢剪力墙的研究尚处在探索阶段,缺少系统的研究,有关短肢剪力墙结构的轴压比对抗剪性能的影响分析还很不完善。在理论分析的基础上,确定了用以判断构件大、小偏压状态的界限轴压比,得到了为保证T形截面短肢剪力墙构件具有一定延性的轴压比限值。     

考虑抗拉强度的含外倾结构面岩质边坡稳定性分析

当前工程设计都是将边坡失稳破坏看成整体的剪切破坏即M-C剪切破坏,基本不考虑岩土体本身抗拉强度.而岩质边坡真实的破坏应该是张拉-剪切复合破坏,不应是传统不考虑抗拉强度的单一剪切破坏模式.利用FLAC3D软件,基于张拉-剪切复合破坏准则对岩体和结构面强度参数同时进行强度折减,与只考虑抗剪强度的情况进行比较来研究抗拉强度对...     

埋入式抗滑桩支护边坡稳定性分析

为研究埋入式抗滑桩在滑坡治理中的适用性,总结前人经验并经大量现场调查研究,提出埋入式抗滑桩支护的3种失效模式,即桩后滑体整体失稳、桩顶滑体越顶失稳和桩前滑体滑移失稳;并从失效模式入手,简化埋入式抗滑桩支护边坡稳定性分析模型。结合定点剪出的破坏假定,用传递系数法分别验算桩周3部分土体即桩后土体、桩顶土体和桩前土体的稳定性。最后在埋入式抗滑桩支护边坡稳定性分析模型的基础上,围绕滑体几何形态、滑面倾角、滑带及滑体力学性质等关键因素,对埋入式抗滑桩的适用条件进行探讨。研究表明:埋入式抗滑桩置于平缓段有利于其阻隔作用的发挥,保证桩前滑体的稳定性;置于滑体强度大于滑带强度的滑坡,有利于利用滑体较高的土工参数;置于坡面平缓的滑坡,有利于桩顶滑体的稳定。     

Optimization of buckling load for laminated composite plates using adaptive Kriging-improved PSO: A novel hybrid intelligent method

An effective hybrid optimization method is proposed by integrating an adaptive Kriging (A-Kriging) into an improved partial swarm optimization algorithm (IPSO) to give a so-called A-Kriging-IPSO for maxi-mizing the buckling load of laminated composite plates (LCPs) under uniaxial and biaxial compressions. In this method, a novel iterative adaptive Kriging model, which is structured using two training sample sets as active and adaptive points, is utilized to directly predict the buckling load of the LCPs and to improve the efficiency of the optimization process. The active points are selected from the initial data set while the adaptive points are generated using the radial random-based convex samples. The cell-based smoothed discrete shear gap method (CS-DSG3) is employed to analyze the buckling behavior of the LCPs to provide the response of adaptive and input data sets. The buckling load of the LCPs is maximized by utilizing the IPSO algorithm. To demonstrate the efficiency and accuracy of the proposed methodology, the LCPs with different layers (2, 3, 4, and 10 layers), boundary conditions, aspect ratios and load patterns (biaxial and uniaxial loads) are investigated. The results obtained by proposed method are in good agreement with the literature results, but with less computational burden. By applying adaptive radial Kriging model, the accurate optimal results-based predictions of the buckling load are obtained for the studied LCPs.