单装战损评估仿真系统的设计与实现

首先介绍了系统模型的建立;接着阐述了系统功能、结构以及各子系统的设计与实现;继而介绍了系统实现所用到的关键技术和方法;最后利用该系统,进行了某杀爆战斗部对卡车毁伤的仿真试验,得出了汽车部件毁伤分布及毁伤等级等结果。仿真结果表明,该仿真结果与试验数据基本吻合。该系统可以为维修保障及器材供应计划的制定提供参考依据。     

迫击炮防重装装置研究

追击炮射击时可能会发生弹药重复装填，常常导致膛炸等严重事故，迫击炮防重装装置可有效防止该类事故发生。分析对比了光电式、电磁式、机械式3种技术方案的工作原理、技术特点，设计了一种安全可靠、能够适应各种复杂恶劣环境的机械式迫击炮防重装装置，详细介绍了其结构设计、工作原理和技术性能。     

弹药不足条件下小口径舰炮射击方法

在未来的海战中,小口径舰炮可能要多次抗击来袭的空中目标.在最后一次抗击中,很可能会出现剩余弹药不再满足整个射击航路段所需的弹药数这种情况.此时如何合理地确定射击方法将对小口径舰炮武器系统的射击效果产生直接的影响.在现有战术软件的基础上,提出压缩开火距离数学模型,可以明显提高小口径舰炮武器系统,对空中目标尤其是导弹目标的命中概率.     

基于PLC的引信旋卸控制系统设计

针对引信旋卸危险的难题,设计了基于西门子PLC-135WB的自动控制系统,实现了引信旋卸过程中的自动上弹、旋卸、退弹、防爆等功能,不仅提高了危险作业环节中的工作效率,而且保证了作业过程中的安全性和可靠性。     

长期储存的密封包装弹药防潮管理研究

本文从理论上详细分析了影响密封包装弹药内部湿度的可能因素,提出了密封包装弹药在长期储存过程中应该采取的防潮管理措施及对策。     

Ricochet quantification using a multiple sensor approach

This study investigates the ricochet behaviour of three different small-arms projectile types using a novel ricochet measuring device.The results can be used to estimate the danger potential of ricochets on shooting ranges.A ricochet is the change of direction and velocity of a projectile after impacting an oblique surface.This impact produces strong vibrations on a rigid plate.During this impact,flexural waves travel radially outwards from the point of impact.These waves are used to determine the properties of the impactor with accelerometers situated on the target surface.With the use of two measurement plates,one can produce a ricochet and detect the velocity at the same time.Accelerometers are suitable for accurate momentum measurements of single impacts.However,depending upon strike velocity and the impact angle,a ricochet can separate in multiple fragments after being deflected.From the operational safety perspective,these fragments need to be detected,as well.The approach of a coupled sensor concept was chosen to solve this problem.Thermographic sensors were additionally used to visualise the heat which is produced after pene-trating a rubber layer pasted in front of the steel target plate.With this approach one was able to detect the position of impact.The investigations showed that the measurement system performance is better with a multiple sensor design,which includes accelerometers for the velocity,impact strength and partly the position measurement,while the thermographic sensor was used for the position measurement and partly the momentum measurement.The investigated ammunition showed plausible fragmentation behaviour,and the results can already be used to estimate the danger potential of different ammunition types.Frangible projectiles fragment to small particles already after being deflected under a small angle.However,Full Metal Jacket projectiles with or without a steel core do not fragment under angles which are less than 5°.The objective of the paper is to demonstrate the possibility of measuring the complex ricochet me-chanics of small projectiles using standard accelerometers with the adequate signal processing approach.This measuring system is supported by an off the shelf thermographic camera.     

Pressure relief of underground ammunition storage under missile accidental ignition

Safety of underground ammunition storage is an important issue, especially during the accidental ignition of missiles. This work investigates the pressure and temperature distribution of the multi-layer underground ammunition storage with a pressure relief duct during the accidental ignition process of the missile. A large-scale experiment was carried out using a multi-layered restricted space with a pressure relief duct to simulate the underground ammunition store and a solid rocket motor to simulate the accidental ignition of the missile. The results show that when the motor gas mass flow increased by 5.6 times, the maximum pressure of the ammunition storage increased by 5.87 times. At a certain motor flow rate, when the pressure relief exhaust area at the end of the relief duct was reduced by 1/2, the maximum pressure on the first layer did not change. But the rate of pressure relief was reduced and the time delayed for the pressure of ammunition store to drop to zero. In this experiment, when the motor ignition position was located in to the third layer ammunition chamber, the maximum pressure was reduced by 32.9％ and also reduced the rate of change of pressure. In addition, for the experimental conditions, the theoretical analysis of the pressure relief of the ammunition storage is given by a simplified model. Based on the findings, some suggestions to the safety protection design of ammunition store are proposed.     

多用途子母弹对集群目标毁伤效率评估模型

多用途子母弹是多功能火炮配备的一种集地面打击和防空袭于一体的新型弹药,为充分发挥该弹药的战技性能,并合理地研究其作战使用。在假定单个目标均匀分布的基础上,运用离散的方法研究并建立了单发多用途子母弹对集群目标射击的效率评定模型,在此基础上又建立了多发多用途子母弹对集群目标射击时的效率评定模型,并运用模型进行了计算分析,计算结果表明该模型计算过程简便、精度高、准确性较好。     

无伞末敏子弹大攻角非线性空气动力和力矩模型

以无伞末敏子弹为背景,分析了描述大攻角飞行弹丸横向运动和角运动的运动变量,建立了大攻角情况下弹丸所受非线性空气动力和空气动力矩的模型,推导出了复数形式的弹丸横向运动与角运动方程。数值积分计算表明,弹丸在特定非线性空气动力和力矩作用下,能够形成所需形式的扫描运动,证明所建力学模型正确合理,可以用于无伞末敏子弹动力学特性的分析与计算。     

子弹圆环内散布子母弹对圆目标的毁伤概率

为研究子弹圆环内均匀散布的情况子母弹对圆目标的毁伤概率,首先研究子弹散布范围覆盖圆目标的面积,然后用概率分析的方法推导出了子弹单圆环均匀散布下子母弹单发射及相关射击对圆目标的毁伤概率计算公式,并讨论了子弹多环均匀散布下子母弹毁伤概率的计算方法。算例表明子弹双圆环内均匀散布时,子母弹对圆目标的毁伤概率要略高于子弹单环对圆目标的毁伤概率。