层流介质中金属板腐蚀电位分布研究

为了研究流动介质中产生的静电场,结合电化学和流体力学相关知识建立层流介质中金属板模型,利用贝塞尔函数展开及其逆运算推导出在三层介质中基于点电荷模型的腐蚀电位解析表达式,同时计算出金属板产生的电场。运用推导出的解析表达式计算出在流动介质中任意场点处金属板随不同流速产生的腐蚀电位,并通过实验验证结果的正确性。结果表明,对层流条件下电化学反应产生的电流密度所建模型的结果与实验测量数据吻合度较高,同时电场分布也会随着流体流速及层流方向上长度的变化而发生变化。     

可溶纤维防火门芯板研制及应用前景

分析了目前国内外防火门芯板技术和生产现状,提出应研发可溶性纤维门芯板以满足环保和防护等级的需要。介绍了研发可溶性纤维门芯板的技术路线和技术关键,预测了可溶纤维防火门芯板的应用前景。     

一种改进Van Leer格式的构造与分析

基于传统的Van Leer格式提出了一种改进的Van Leer(NVL)格式,解决了Van Leer格式在低马赫数下数值耗散过大,不能求解有粘流场等问题,同时保持Van Leer格式的计算效率.通过二维平板流动算例比较了NVL格式与传统Van Leer格式的数值耗散程度,并以NACA0012翼型的亚声速和跨声速流场以及M6机翼的跨声速流场求解为算例,与Roe格式和传统Van Leer格式进行比较,进一步验证了NVL格式的低耗散性和高效性.     

22SiMn2TiB装甲钢异种焊接接头超声波探伤探头设计

用常规探头对22SiMn2TiB装甲钢与TWE312异种钢焊接接头进行缺陷检测,杂波和伪缺陷波导致灵敏度、信噪比不高。用扫描电镜观察到这种异种钢焊接接头主要为奥氏体+铁素体组织,其中奥氏体是主体组织。根据焊缝的组织特点,设计出了2.5P13×13K1.5型专用探头。在预制缺陷的焊接接头上进行了验证试验,结果表明2.5P13×13K1.5探头对接头内部的缺陷具有较高的检出率。     

Critical interfaces in body armour systems

The ballistic performance, and behaviour, of an armour system is governed by two major sets of variables, geometrical and material. Of these, the consistency of performance, especially against small arms ammunition, will depend upon the consistency of the properties of the constituent materials. In a body armour system for example, fibre diameter, areal density of woven fabric, and bulk density of ceramic are examples of critical parameters and monitoring such parameters will form the backbone of associated quality control procedures. What is often overlooked, because it can fall into the User’s domain, are the interfaces that exist between the various products; the carrier, the Soft Armour Insert (SAI), and the one or two hard armour plates (HAP1 and HAP2). This is especially true if the various products are sourced from different suppliers.There are between 30 and 150 individual layers within a typical body armour system, and each of the interfaces between each of those layers will, in some way or another, contribute to the ballistic performance of the system. For example, consider the following interfaces/interlayers: (i) the frictional, sliding, inter-ply surfaces within a soft armour pack, and also between the pack and the carrier, (ii) the air-gaps that may develop within the soft armour pack, (iii) the interconnecting space between the soft armour pack and the hard armour plate, (iv) the nature of the interfaces between adjacent plies of a multiplied backing laminate, even in a highly compressed Ultra High Molecular Weight Polyethylene (UHMWPE) variant, (v) the interlayer between the ceramic and its substrate, within a HAP, and (vi) the geometrical fit between two hard armour plates within a stacked body armour system. This paper will provide a User-friendly overview of all such interfaces and provide unique guidance as to their criticality and influence.     

一种遥测信号的模式识别算法研究

如何进行遥测信号的提取是遥测信号数据处理的重要环节,针对典型脉冲码元,提出了特征提取和软件模板的建立及算法的实现.     

建立一类挠性航天器的动力学模型及面向控制的仿真环境

对于一类具有一个中心刚体和两块对称安装的太阳帆板的挠性航天器,针对其帆板较长、弹性位移较大,导致根据文献[2]直接建立的模型不准的问题,提出将弹性帆板分段处理的方法,分别引入浮动坐标系,建立系统的动力学仿真模型。并将针对整体模型设计的控制规律作用于该模型,进行了数值仿真。仿真结果表明,对于大变形情况,分段处理的方法十分有效。     

Experimental investigation on anti-penetration performance of polyurea-coated ASTM1045 steel plate subjected to projectile impact

In this study, the anti-penetration performance of polyurea/ASTM1405-steel composite plate subjected to high velocity projectile was analyzed. Two kinds of modified polyurea material (AMMT-053 and AMMT-055) were selected and a ballistic impact testing system including speed measuring target system and high-speed camera was designed. This experiment was conducted with a rifle and 5.8 mm projectile to explore the effects by the polyurea coating thickness, the polyurea coating position and the glass-fiber cloth on the anti-penetration performance of polyurea/ASTM1405-steel composite plate. The result showed that the effects of polyurea coating position were different between two types of polyurea, and that the effects of glass-fiber position were disparate between two types of polyurea as well. For AMMT-053 polyurea material, it was better to be on front face than on rear face; whereas for AMMT-055 pol-yurea, it was better to be on rear surface although the difference was very subtle. Additionally, formulas had been given to describe the relationship between the effectiveness of polyurea and the thickness of polyurea coating. In general, AMMT-055 had better anti-penetration performance than AMMT-053. Furthermore, five typical damage modes including self-healing, crack, local bulge, spallation and local fragmentation were defined and the failure mechanism was analyzed with the results of SHPB test. Additionally, the bonding strength played an important role in the anti-penetration performance of polyurea/steel composite plate.     

钢筋混凝土外粘钢板结构裂缝的有限元数值模拟

随着高技术武器的不断发展,防护工程正面临着前所未有的威胁和挑战,新型防护结构及材料已经成为研究的热点。针对这一实际背景,运用ANSYS大型有限元软件,采用数值模拟的方法对普通钢筋混凝土结构和外粘钢板混凝土结构在相同均布面荷载作用下的变形、钢筋应力以及结构裂缝的开展情况进行了比较。结果表明外粘钢板的钢筋混凝土结构能够大大增强结构的抗力,并且有效的抑制了裂缝的开展。     

采用动网格技术的弹托分离仿真模型

针对一体化弹丸出炮口后弹托由与弹体接触到绕弹托质心做六自由度运动的过程,提出一种基于弹托分段分离运动并采用动网格技术耦合流体控制方程和六自由度运动方程的弹托分离仿真模型。以尾翼稳定脱壳穿甲弹为例,仿真分析不同马赫数下的弹托分离情况,并探讨弹托和弹体气动系数在分离过程中的变化情况。仿真结果表明:弹托分离马赫数越大,分离轨迹越靠近弹体且分离时间越短,但对地分离横向位移越大。通过与试验数据的对比,验证了所提弹托分离仿真模型的准确性。