伞翼无人机线性自抗扰高度控制

针对伞翼无人机参数不确定性和复杂环境干扰敏感的问题,提出一种伞翼无人机线性自抗扰(Linear Active Disturbance Rejection Control,LADRC)高度控制方法。建立伞翼无人机8自由度飞行动力学模型,并引入风场和降雨模型以更加准确地模拟真实飞行环境。基于LADRC确定总体控制架构,设计线性扩张状态观测器对所有扰动进行估计,并引入误差反馈率在控制中实时补偿。使用该控制方法在多种扰动工况下进行伞翼无人机高度控制仿真实验。仿真结果表明,基于LADRC的高度控制方法能够有效克服内扰和外扰的影响,实现高精度高度控制;与传统PID控制效果相比,LADRC控制器具有更好的抗扰能力和鲁棒性。     

满足线性二次型调节器性能指标的群系统编队跟踪问题优化控制方法

针对群系统编队跟踪问题,提出一种满足线性二次型调节器性能指标的优化控制方法。建立编队跟踪问题的数学描述和设计编队跟踪控制协议。给出群系统实现编队跟踪的充要条件,借助李雅普诺夫第二方法分析系统的稳定性。得到了控制协议能够最小化线性二次型调节器性能指标的拓扑条件,设计了编〖BHDWG8,WK10YQ,DK1*2,WK1*2D〗〖XCWL.TIF;%129%129〗听语音 聊科研与作者互动 队跟踪算法。仿真实验验证了控制方法的有效性。     

Driving force coordinated control of an 8 ×8 in-wheel motor drive vehicle with tire-road friction coefficient identification

Because of the complexities of tire-road interaction,the wheels of a multi-wheel distributed electric drive vehicle can easily slip under certain working conditions.As wheel slip affects the dynamic per-formance and stability of the vehicle,it is crucial to control it and coordinate the driving force.With this aim,this paper presents a driving force coordination control strategy with road identification for eight-wheeled electric vehicles equipped with an in-wheel motor for each wheel.In the proposed control strategy,the road identification module estimates tire-road forces using an unscented Kalman filter al-gorithm and recognizes the road adhesion coefficient by employing the recursive least-square method.According to road identification,the optimal slip ratio under the current driving condition is obtained,and a controller based on sliding mode control with a conditional integrator uses this value for accel-eration slip regulation.The anti-slip controller obtains the adjusting torque,which is integrated with the driver-command-based feedforward control torque to implement driving force coordination control.The results of hardware-in-loop simulation show that this control strategy can accurately estimate tire-road forces as well as the friction coefficient,and thus,can effectively fulfill the purpose of driving force coordinated control under different driving conditions.     

科学管理、精益管理与精确作战工程保障研究

设计是作战行动筹划的重要步骤,精确工程保障需要对工程保障行动进行精密的设计和精确管理与控制。科学管理采用科学实验的方法,通过劳动方法标准化和差别计件工资制度,有效提高了工作效率,其基本原理经过百余年的实际检验,被证明是一个成熟有效的管理方法。借鉴科学管理理论,需要对工程保障行动进行动作研究,进而研究工程保障行动的作业标准,以期提高其保障效率。精益管理是在科学管理在新的历史时期的发展与改进,它使用了准时制、零库存、均衡生产、持续改进等先进的管理理念和六西格玛管理、成组技术等先进技术,为基于信息系统体系作战的工程保障能力生成提供了有益的借鉴,可加深我们对精确工程保障的理解,促进精确工程保障研究的可操作性。     

飞机电磁弹射系统发展及其关键技术

总结论述了美国和英法国家的飞机电磁弹系统工程化应用研制的发展状况,综述了电磁弹射用直线电机的方案选型设计、仿真技术、性能优化和控制方法等方面的关键技术和研究现状,针对电磁弹射技术的发展前景和应用给出了相关建议,为国内电磁弹射相关技术的发展提供了借鉴。     

逆变器-异步电机电磁噪声的分析与研究

利用Ansoft建立了样机的二维模型,计算了样机在空载运行下的各性能参数,分析了样机内的磁场分布情况.在此基础上,计算了负载大小、机壳设计尺寸和逆变器供电对异步电机电磁噪声的影响.仿真分析表明:通过合理改变机壳尺寸和质量以及选择合适的逆变器开关频率的方法可实现异步电机的降噪.     

Initiating insurgencies abroad: French plans to ‘chouannise’ Britain and Ireland, 1793–1798

Secret French plans to launch guerrilla-style raids on the British Isles devised in the spring of 1796 were referred to as ‘chouanneries’. The name and concept behind these small-war operations were modelled on the irregular tactics used by the Chouan rebels in the Vendée, which the French state army had brutally quashed, but some wished to transfer into their institutional practice. Part of France's ongoing military strategy in the war against Britain, which included fomenting insurrection in Ireland, these irregular operations were to be manned partially by pardoned deserters and released convicts and prisoners of war. Of these, only Tate's brief invasion of Wales in 1797 was realised, but the surviving plans provide insightful historical lessons into an Anglophobic mindset shared by a small network of practitioners and policy deciders on the effectiveness of such shock and awe tactics. Largely motivated by the desire to take revenge for Britain's support of counter-revolutionaries in the Vendée, these plans could more aptly be referred to as counter-‘chouanneries’.     

非相干背景光辐照二波耦合中的最佳匹配随机共振

针对非相干背景光辐照二波耦合中参数的最佳匹配设计问题,提出了一种基于随机共振理论的研究方法。首先,文章通过二波耦合过程进行物理机理分析和数值实验分析,证明了该问题在本质上可归结为一种随机共振现象。其次,从随机共振的角度,研究其中的最佳参数设计问题,给出了一种分布处理的最优参数设计流程。按照该方法,在给定增益要求的情况下,先根据信号光饱和与否来确定晶体长度,最后根据非相干光的比例对增益的影响来确定非相干光的比例。仿真实验表明,经过最佳参数设计后,信号的增益和输出信噪比上均有显著提高。     

Assessing the value of demand sharing in supply chains

We consider the problem of assessing the value of demand sharing in a multistage supply chain in which the retailer observes stationary autoregressive moving average demand with Gaussian white noise (shocks). Similar to previous research, we assume each supply chain player constructs its best linear forecast of the leadtime demand and uses it to determine the order quantity via a periodic review myopic order‐up‐to policy. We demonstrate how a typical supply chain player can determine the extent of its available information in the presence of demand sharing by studying the properties of the moving average polynomials of adjacent supply chain players. The retailer's demand is driven by the random shocks appearing in the autoregressive moving average representation for its demand. Under the assumptions we will make in this article, to the retailer, knowing the shock information is equivalent to knowing the demand process (assuming that the model parameters are also known). Thus (in the event of sharing) the retailer's demand sequence and shock sequence would contain the same information to the retailer's supplier. We will show that, once we consider the dynamics of demand propagation further up the chain, it may be that a player's demand and shock sequences will contain different levels of information for an upstream player. Hence, we study how a player can determine its available information under demand sharing, and use this information to forecast leadtime demand. We characterize the value of demand sharing for a typical supply chain player. Furthermore, we show conditions under which (i) it is equivalent to no sharing, (ii) it is equivalent to full information shock sharing, and (iii) it is intermediate in value to the two previously described arrangements. Although it follows from existing literature that demand sharing is equivalent to full information shock sharing between a retailer and supplier, we demonstrate and characterize when this result does not generalize to upstream supply chain players. We then show that demand propagates through a supply chain where any player may share nothing, its demand, or its full information shocks (FIS) with an adjacent upstream player as quasi‐ARMA in—quasi‐ARMA out. We also provide a convenient form for the propagation of demand in a supply chain that will lend itself to future research applications. © 2014 Wiley Periodicals, Inc. Naval Research Logistics 61: 515–531, 2014     

Poachers turned gamekeepers: A study of the guerrilla phenomenon in Spain, 1808–1840

This article modifies the associations made by historians and political scientists of Spanish guerrilla warfare with revolutionary insurgency. First, it explains how the guerrilla phenomenon moved from a Leftist to a reactionary symbol. Second, it compares the insurgency and counter-insurgency features of the Carlist War (1833–1840) with those of the better-known Peninsular War (1808–1814). Third, it shows how erstwhile guerrilla leaders during the Carlist War made their expertise available to the counter-insurgency, in a socio-economic as well as military setting. This article revises the social banditry paradigm in nineteenth-century Spain in the under-researched context of Europe bloodiest nineteenth-century civil war.