基于LPS模型的飞行器控制系统故障诊断方法

传统故障诊断方法一般针对测量信号而展开,未考虑其实际物理连接特性对故障诊断结果的显著影响。随着专业电气系统设计软件的广泛应用,设计人员容易获取系统的物理连接特性和逻辑连接特性。论文通过对产品层、系统层的信号、物理连接及其互连关系的分析,提出了一种将抽象的逻辑信号和具体的物理连线统一起来的逻辑物理综合(LPS)模型,并研究了基于导线表文件和网表文件的LPS模型实例化方法,开发了一套智能故障检测软件,进行了算例验证,结果表明：基于LPS模型的故障诊断方法能够将系统故障定位到指定产品级别上,具有极大的工程应用价值。     

Periodic review inventory management with contingent use of two freight modes with fixed costs

We study a stochastic inventory model of a firm that periodically orders a product from a make‐to‐order manufacturer. Orders can be shipped by a combination of two freight modes that differ in lead‐times and costs, although orders are not allowed to cross. Placing an order as well as each use of each freight mode has a fixed and a quantity proportional cost. The decision of how to allocate units between the two freight modes utilizes information about demand during the completion of manufacturing. We derive the optimal freight mode allocation policy, and show that the optimal policy for placing orders is not an (s,S) policy in general. We provide tight bounds for the optimal policy that can be calculated by solving single period problems. Our analysis enables insights into the structure of the optimal policy specifying the conditions under which it simplifies to an (s,S) policy. We characterize the best (s,S) policy for our model, and through extensive numerical investigation show that its performance is comparable with the optimal policy in most cases. Our numerical study also sheds light on the benefits of the dual freight model over the single freight models. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

我国周边安全形势对边防工作的影响及应对策略

边防工作作为国防的重要组成部分,涉外性强,受周边安全形势影响大。当前,我国的边防工作既面·l盏着难得的发展机遇,同时更要直面各种挑战。分析周边安全环境对我国边防的影响,可以使我们更好地认清形势,趋利避害,抓住机遇,充分发挥职能作用,确保边防安全稳定。     

灭火初战应把握的关键环节

灭火作战初战是整个灭火战斗的前期战,它的成功与否直接影响到整个灭火战斗的成败。重点论述了如何把握初战的火情侦查、火场救人、控制火势等三个关键环节,以期对基层广大指战员有所指导。     

雷达PPI光栅扫描显示系统设计与实现

介绍一种基于微机的雷达PPI光栅扫描显示系统的设计与实现。研究了坐标快速转换、数据实时采集等关键技术,提出了优化查表法坐标转换方法以及回波数据的实时采集方案,很好满足了PPI光栅扫描显示系统中高速率、低存储量以及实时性的要求。研究成果已成功应用于某型号雷达PPI显示系统中。     

总线型导弹控制系统状态监测与故障诊断技术

分析了总线型导弹控制系统的地面测控体系及其特点,阐述了系统中单机部件的组成结构及其BIT技术;提出了新的测控体系下导弹控制系统状态监测和故障诊断方法,重点针对总线数据接口格式、系统知识表示和状态监测与故障诊断流程进行了讨论。     

Kurtosis correction method for X̄ and R control charts for long‐tailed symmetrical distributions

This paper proposes a kurtosis correction (KC) method for constructing the X? and R control charts for symmetrical long‐tailed (leptokurtic) distributions. The control charts are similar to the Shewhart control charts and are very easy to use. The control limits are derived based on the degree of kurtosis estimated from the actual (subgroup) data. It is assumed that the underlying quality characteristic is symmetrically distributed and no other distributional and/or parameter assumptions are made. The control chart constants are tabulated and the performance of these charts is compared with that of the Shewhart control charts. For the case of the logistic distribution, the exact control limits are derived and are compared with the KC method and the Shewhart method. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

用毁伤概率指标优化二点源诱饵系统布阵

两点源诱偏系统是应用有源干扰的方式,利用反辐射导弹(ARM)本身的缺陷来对反辐射导弹的导引头进行干扰,从而达到保护主战雷达目的的一种有源干扰系统。主要从反辐射导弹的基本原理和有源诱偏的概念入手,对两点源诱偏系统进行理论推导、数学建模、布站设想,后引入毁伤概率指标对各种布站方式进行分类、仿真,对每一种仿真结果进行分析、评估,再把各种分析结果加以比较,从中找出最佳的布站方式。最后利用以上的分析结果,得出几点有用的结论。     

采用滑模控制器提高稳定控制系统快速响应的研究

由于采用传统的稳定控制系统设计方法使得导弹弹体对不同大小指令信号响应的品质特性差异较大,因此主要研究了在传统的稳定控制系统设计方法的基础上,采用滑模变结构控制器来调节控制参数,较好地解决了稳定控制系统对大小指令信号时域响应特性差异较大的问题,提高了稳定控制系统的快速响应能力。     

约束条件下导弹姿态跟踪保性能控制

针对BTT导弹在飞行过程中模型存在较大不确定性,并且控制舵的摆角受到物理装置约束的情况,研究了在约束条件下导弹姿态跟踪保性能控制的设计问题。首先在弹道的特征点处将导弹的非线性运动瞬时线性化,将导弹看作是一个不确定线性系统,提出应用基于线性矩阵不等式的跟踪保性能控制设计姿态控制器,然后推导得到满足控制约束的充分条件,以定理的形式给出了约束条件下跟踪保性能控制存在的充分条件。最后以某型导弹的姿态控制为例,设计了其姿态的跟踪保性能控制器。六自由度仿真结果表明了所得方法的有效性和可行性。