一个功能较强的等离子体电磁波粒子模拟程序

本文发展了一个功能较强的1 2/2D 等离子体粒子模拟程序。文中就一维情况,论述了等离子体粒子模拟的原理、方法和计算机编程中的处理技巧。最后讨论了电磁模拟的应用。     

15cm×15cm 磁悬挂天平系统(MSBS)的电磁场分析与计算

本文采用二维电磁场有限元法及磁路的简化计算法对15cm×15cm磁悬挂天平系统（MSBS）的阻力线圈间距、磁场的分布情况进行了分析计算,并与测试结果进行了分析比较,给出了15cm×15cm磁悬挂天平系统（MSBS）的结构方案。     

一种基于三角面元的目标RCS实用计算方法

提出一种计算复杂目标高频区RCS的实用方法。首先采用3DStudioMax对装甲车进行三角面元模拟,然后运用路德维格积分[1]和物理绕射理论(PTD)计算目标的雷达散射截面积,通过对方柱RCS的计算,验证了所提方法的有效性,最后给出了C波段和X波段不同极化的装甲车和坦克RCS的方位分布图。     

关于影剧院消防设计的探讨

通过分析大型剧场火灾的特点 ,针对其结构特点阐述了大型剧场在消防设计上应注意的几个方面 ,旨在探讨大型剧场的消防设计方法。     

内蒙古边境地区可持续发展对策

内蒙古边境地区是我国北方最重要的生态防线 ,是改革开放的前沿 ,也是一个欠发达的地区 ,在其发展中面临着许多严峻的问题和困难。内蒙古边境地区只有通过快速而健康地发展 ,才能摆脱和解决所面临的许多困难和问题。而要快速、健康地发展 ,就必须实施经济与社会可持续发展战略。     

一种新的基于二阶统计量的信道盲辨识与均衡算法

通过对接收信号进行过采样,应用过采样接收信号产生的循环平稳特性,给出单输入单输出系统的等效单输入多输出系统模型,据此模型给出了一种新的基于二阶统计量的盲辨识与均衡算法,给出的算法只需要接收信号的二阶统计量即可以辨识与均衡信道。     

反解法在再入机动弹道设计中的应用研究

简要分析了一般的再入机动弹道设计方法,即正解法.针对正解法对模型依赖性强和对初值非常敏感的问题,提出了一种基于误差补偿的机动弹道设计方法——反解法.该方法从弹道终端出发反解弹道,将计算结果误差转化为机动点参数误差,再通过关机点或中制导的调整进行误差补偿,从而有利于命中精度和打击效果的实现.仿真结果表明,该方法计算简便,对工程应用有一定的参考价值.     

5GHz雷达的干扰计算模型概述

文章从开发5 GHz模型的目的入手,简要介绍了5 GHz模型的结构组成,详细讨论了5 GHz模型的干扰计算流程,包括无线局域网和雷达的场景设置、技术参数设置、总干扰计算等,最后给出了5 GHz模型的一个运行范例,以期为其它干扰模型的开发提供借鉴参考。     

Effects of nano-sized aluminum on detonation characteristics and metal acceleration for RDX-based aluminized explosive

Nano-sized aluminum(Nano-Al)powders hold promise in enhancing the total energy of explosives and the metal acceleration ability at the same time.However,the near-detonation zone effects of reaction between Nano-Al with detonation products remain unclear.In this study,the overall reaction process of 170 nm Al with RDX explosive and its effect on detonation characteristics,detonation reaction zone,and the metal acceleration ability were comprehensively investigated through a variety of experiments such as the detonation velocity test,detonation pressure test,explosive/window interface velocity test and confined plate push test using high-resolution laser interferometry.Lithium fluoride(LiF),which has an inert behavior during the explosion,was used as a control to compare the contribution of the reaction of aluminum.A thermochemical approach that took into account the reactivity of aluminum and ensuing detonation products was adopted to calculate the additional energy release by afterburn.Combining the numerical simulations based on the calculated afterburn energy and experimental results,the param-eters in the detonation equation of state describing the Nano-Al reaction characteristics were calibrated.This study found that when the 170 nm Al content is from 0％to 15％,every 5％increase of aluminum resulted in about a 1.3％decrease in detonation velocity.Manganin pressure gauge measurement showed no significant enhancement in detonation pressure.The detonation reaction time and reaction zone length of RDX/Al/wax/80/15/5 explosive is 64 ns and 0.47 mm,which is respectively 14％and 8％higher than that of RDX/wax/95/5 explosive(57 ns and 0.39 mm).Explosive/window interface velocity curves show that 170 nm Al mainly reacted with the RDX detonation products after the detonation front.For the recording time of about 10 μs throughout the plate push test duration,the maximum plate velocity and plate acceleration time accelerated by RDX/Al/wax/80/15/5 explosive is 12％and 2.9 μs higher than that of RDX/LiF/wax/80/15/5,respectively,indicating that the aluminum reaction energy significantly increased the metal acceleration time and ability of the explosive.Numerical simulations with JWLM explosive equation of state show that when the detonation products expanded to 2 times the initial volume,over 80％of the aluminum had reacted,implying very high reactivity.These results are significant in attaining a clear understanding of the reaction mechanism of Nano-Al in the development of aluminized explosives.     

A method to determine the shell layout scheme for equipment battlefield damage tests under artillery fire

In this paper,a new method for determining the shell layout scheme is proposed,which can make the equipment damage data by the battlefield damage test resemble as close as possible the actual combat data.This method is based on the analysis of the impact point distribution and effective damage area of equipment.In order to obtain the position of the impact points,an impact point distribution model under artillery fire was established.Similarly,in order to obtain the effective damage area of equipment,the concepts of generalized damage area and task-based equipment functional damage probability were demonstrated,and the corresponding calculation model was established.Through case analysis,the shell layout scheme was effectively obtained,verifying the correctness of the proposed method.