瞄准具多因素误差分析模型

本文利用坐标轴旋转公式建立了瞄准具多因素误差分析模型。为机械式、半独立式瞄准具的不解体检测提供了理论基础.     

运用科学发展观培养有特色复合型军事人才的实践与思考

为应对世界新军事变革对军事人才队伍建设提出的严峻挑战,军事院校必须全面落实科学发展观,坚持以人为本,大力培养建立在信息化技术基础之上的专业特色突出的军事人才,坚持复合型军事人才的全面、协调发展,坚持可持续发展,确保有特色、复合型军事人才发展的可持续性。     

Analysis of the mass of behind-armor debris generated by RHA subjected to normal penetration of variable cross-section EFP

Analyzing the mass of behind-armor debris (BAD) generated by Rolled Homogeneous Armor (RHA) subjected to normal penetration of variable cross-section Explosively Formed Projectile (EFP) is the purpose of this paper. So theoretical analysis, numerical simulation and experimental data are combined to analyze the influence of variable cross-section characteristic on the time history of crater radius. Moreover the relationships between time history of crater radius (as well as mass of BAD) and the thickness of RHA (from 30 mm to 70 mm) and the impact velocity of EFP (1650 m/s to 1860 m/s) are also investigated. The results indicate that: 1) being compared to the variable cross-section characteristic is ignored, the theoretical time history of crater radius is in better agreement with the simulation results when the variable cross-section characteristic is considered; 2) being compared to the other three conditions of plug, the theoretical mass of BAD is in the best agreement with the simulation results when the shape of plug is frustum of a cone and the angle between generatrix and bottom is 45° and the axial length of mushroom is considered.     

溅板式层板喷注单元燃烧特性数值分析

为了获得喷注单元结构参数对喷注器燃烧特性的影响规律,利用数值分析方法对单喷嘴溅板式层板喷注单元气-气燃烧特性进行研究,考察燃烧室特征长度及出口层喷嘴宽度对气氧/甲烷流动及燃烧特性的影响。在求解气-气燃烧流场方面,采用带化学反应的湍流N-S方程进行描述,其中化学动力学反应模型采用简化的单步9组分模型。研究结果表明:燃烧室特征长度的增大有利于特征速度效率的增加;该条件下采用溅板式层板喷注单元所对应的燃烧室特征长度约为600 mm。对比分析发现,出口层喷嘴宽度取0.15 mm时,水组分摩尔分数与热力计算值差别最大;当其值取1.05 mm时,燃烧室头部区域截面温度上升最快,取0.45 mm时上升最慢。总的来说,出口层喷嘴宽度取0.75 mm时,燃烧长度最短,燃烧效率最大。     

基于高精度景象匹配的SAR平台定位方法研究

为了提高SAR平台定位精度，本文提出了一种基于景象匹配的SAR平台定位的方法。该方法利用成像中间时刻SAR平台与SAR图像中心线上物点共线的特性，先在图像中心线上均匀选取若干点作为匹配点，并与光学基准图进行高精度景象匹配获取它们的物点坐标；然后根据这些物点坐标估计出图像中心线在当地水平面投影的直线方程；最后利用直线信息和斜距高度信息计算SAR平台在水平面上的投影点位置，进而计算得到成像中间时刻SAR平台的空间位置。为了进一步提高匹配精度，分别提出了对正侧视和斜视SAR图像匹配区域进行几何粗校正的方法。本文还分析了不同误差因素对平台定位精度的影响，并给出了精度估计公式。仿真和实际图像实验结果表明，本文方法正确可行，具有较高的定位精度，具备工程实用价值。     

基于VFGPIR联合特征的决策级加权融合检测方法

车载前视地表成像雷达(VFGPIR)探测浅埋目标时面临虚警率过高问题,可利用序列图像特征的联合检测解决这一问题.首先利用Fisher鉴别比(FDR)定量评估从单帧和序列图像中提取的单个特征的鉴别能力;然后针对单个最优序列特征无法满足探测指标要求提出一种基于决策级加权融合的多特征联合检测方法;最后利用接收机工作特性(ROC)曲线来验证所提方法的有效性.试验结果表明:序列特征比单帧图像特征具有更好的鉴别能力;所提方法性能优于单个最优序列特征、特征向量和多数票融合准则对应的检测结果,有望满足实际探雷应用需求.     

Modeling and analysis of multiobjective lot splitting for N‐product M‐machine flowshop lines

Lot splitting is a new approach for improving productivity by dividing production lots into sublots. This approach enables accelerating production flow, reducing lead‐time and increasing the utilization of organization resources. Most of the lot splitting models in the literature have addressed a single objective problem, usually the makespan or flowtime objectives. Simultaneous minimization of these two objectives has rarely been addressed in the literature despite of its high relevancy to most industrial environments. This work aims at solving a multiobjective lot splitting problem for multiple products in a flowshop environment. Tight mixed‐integer linear programming (MILP) formulations for minimizing the makespan and flowtime are presented. Then, the MinMax solution, which takes both objectives into consideration, is defined and suggested as an alternative objective. By solving the MILP model, it was found that minimizing one objective results in an average loss of about 15% in the other objective. The MinMax solution, on the other hand, results in an average loss of 4.6% from the furthest objective and 2.5% from the closest objective. © 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

On the nature and scope of defence economics

Defence economics uses the tools of economics to study the defence sector and its domestic and international implications. Simple models require careful application in defence economics, since indirect effects may have counterintuitive impacts. For example, while certain arms races can lead to the outbreak of war, others may have the counterintuitive effect of discouraging the outbreak of war owing to mutual deterrence.

The world is now multipolar rather than bipolar, analogous to an oligopoly situation. This multipolar world can be analyzed by a qualitative characteristic function, where the formation of a potential coalition allows study of the shift from conflict to cooperation in international relations. Some new issues to be considered in this framework include accidental nuclear war, potential arms races and conflicts in the third world, and the proliferation of chemical weapons and missiles.     

瞄准线稳定精度的影响因素仿真

瞄准线稳定精度是直升机载稳瞄系统的关键技术指标之一,它影响着系统的其他关键性指标如照射精度、跟踪精度、作用距离等。因此提高瞄准线稳定精度是设计和研制机载稳瞄系统至关重要的一项任务。论文分析和研究了影响瞄准线稳定精度的因素,并采用Simulink建立数学模型,对瞄准线稳定精度的影响因素进行仿真分析,得到各因素对稳定精度的影响趋势,为机载稳瞄系统的设计工作提供了理论基础。     

基于特征结构配置的车辆主动悬架控制器设计

基于特征结构配置参数化方法,提出了车辆主动悬架控制器设计方法,其目的是设计一组状态反馈控制器,使得闭环结构系统具有希望极点和特征向量。该方法提供的自由参数,可用来满足系统的鲁棒性能等指标。该方法直接基于车辆悬架系统的参数矩阵,故便于工程应用。对车辆悬架系统进行仿真分析,结果表明该设计方法简单有效。