液体火箭发动机无失效条件下的可靠性分析方法

针对液体火箭发动机热试车过程中可能出现的无失效情况,在对寿命分布进行分析的基础上,利用配分布曲线-最小二乘法,采用经典估计和Bayes估计作为先验分布,对液体火箭发动机无失效条件下的可靠性进行了评估,并对评估结果进行了分析。计算结果表明,采用最小二乘法结合Bayes估计,可以较好评估液体火箭发动机在无失效条件下的可靠性。     

基于气动-弹道一体化模型的飞行器外形优化设计

为提升飞行器气动外形优化设计效果,研究了新型飞行器在大空域、宽速域范围的气动适应性问题,提出一种基于气动-弹道一体化模型的外形优化设计方法.通过考虑气动和弹道的耦合作用,综合利用类型函数/形状函数转换技术、气动工程估算方法和Radau伪谱法,建立飞行器气动-弹道一体化模型.基于该模型,通过明确优化目标和约束条件,给出基...     

Damage assessment of the target area of the island/reef under the attack of missile warhead

Under the background of vigorously developing facilities of island/reef in the world, the economic value and strategic significance of the island/reef have become increasingly important. Unfortunately, they may easily become the attacking target of missiles in the war time. Therefore, aiming at the damage quantification of the targets in the island/reef under the missile attacking, a macroscopic damage assessment model for the target area is proposed in this paper. The model focuses on the construction of the assessment model framework. Firstly, the analytic hierarchy process and the grey relational analysis are applied to measure the importance of each target in the region through four indicators of the target hazard, striking urgency, damage advantage and mission relevance, respectively. Secondly, based on the damage mechanism of shock wave and fragments to target, the corresponding damage model is established, and the damage grade of each target in the evaluated area is obtained according to the damage criteria and grading standard. Finally, the model obtains the overall damage grade of the target area by employing the fuzzy comprehensive evaluation method, with synthesizing the importance and the damage grade of each target. Through the verification of an example, it demonstrates the certain feasibility of the model and provides a certain basis and reference for the subsequent research.     

Maximizing deviation method for multiple attribute decision making under q-rung orthopair fuzzy environment

Because of the uncertainty and subjectivity of decision makers in the complex decision-making environment, the evaluation information of alternatives given by decision makers is often fuzzy and uncertain. As a generalization of intuitionistic fuzzy set (IFSs) and Pythagoras fuzzy set (PFSs), q-rung orthopair fuzzy set (q-ROFS) is more suitable for expressing fuzzy and uncertain information. But, in actual multiple attribute decision making (MADM) problems, the weights of DMs and attributes are always completely unknown or partly known, to date, the maximizing deviation method is a good tool to deal with such issues. Thus, combine the q-ROFS and conventional maximizing deviation method, we will study the maximizing deviation method under q-ROFSs and q-RIVOFSs in this paper. Firstly, we briefly introduce the basic concept of q-rung orthopair fuzzy sets (q-ROFSs) and q-rung interval-valued orthopair fuzzy sets (q-RIVOFSs). Then, combine the maximizing deviation method with q-rung orthopair fuzzy information, we establish two new decision making models. On this basis, the proposed models are applied to MADM problems with q-rung orthopair fuzzy information. Compared with existing methods, the effectiveness and superiority of the new model are analyzed. This method can effectively solve the MADM problem whose decision information is represented by q-rung orthopair fuzzy numbers (q-ROFNs) and whose attributes are incomplete.     

Effect of nano powder (Al2O3-CaO) addition on the mechanical properties of the polymer blend matrix composite

This work describes the preparation and study of the properties of composite nanoparticles prepared by the sol-gel method which consists of two materials (Al₂O₃-CaO), and study the effect of these nanoparticles on the mechanical behavior of a polymer blend (EP 4% + 96% UPE). The powder was evaluated by X-ray diffraction analysis, scanning electron microscopy analysis (SEM), particle size analysis, and energy dispersive X-ray analysis (EDX). The mechanical behavior of the composite material was assessed by tensile test, bending test and hardness test. The evaluation results of the composite nanoparticles showed good distribution of the chemical composition between aluminum oxide and calcium oxide, smoothness in particles' size at calcination in high and low temperatures, formation of different shapes of nanoparticles and different (kappa and gamma) phases of the Al₂O₃ particles. The results of mechanical behavior tests showed marked improvement in the mechanical properties of the resulted composite material, especially at 1.5%, compared with polymer blend material without nano powder addition. The tensile properties improved about (24 and 14.9) % and bending resistance about (23.5 and 16.8) % and hardness by (25 and 22) % when adding particles of size (63.8 and 68.6) respectively. Therefore, this reflects the efficiency of the proposed method to manufacture the nanocomposite powder and the possibility of using this powder as a strengthening material for the composite materials and using these composite materials in bio applications, especially in the fabrication of artificial limbs.     

利用最小二乘支持向量机求解潜艇内外磁场映射模型

为提高潜艇磁隐身能力,应对潜艇固定磁场进行实时监测,提出利用最小二乘支持向量机的潜艇内外磁场映射方法。结合内外映射法和最小二乘支持向量机原理,通过交叉验证优化模型参数,建立由内到外的潜艇磁场映射模型。以潜艇外部垂向固定磁场变化量为分析对象,仿真和实验结果均与标准值吻合良好。与径向基神经网络算法相比,该方法的泛化能力和推算精度有明显提高,且更符合工程实际,对闭环消磁技术的研究具有指导意义。     

多碱光电阴极饱和机理研究

多碱光电阴极饱和机理的研究对于提高阴极电子发射能力具有重要意义。依据光电阴极三步电子发射理论,采用蒙特卡洛法研究了多碱光电阴极的电子发射过程。研究结果与相关文献中的实验数据进行了对比分析,光子能量临近光电阴极响应阈值附近时,得到的量子效率曲线以及电子能量分布曲线与实验数据吻合良好。基于上述模型,研究了光压效应和空间电荷效应对多碱光电阴极电子发射特性的影响。结果表明,多碱光电阴极在光压效应限制下的阈值饱和激光能量密度约为8μJ/cm~2,在空间电荷效应限制下的阈值饱和激光能量密度约为2. 23μJ/cm~2。开展了266 nm激光辐照多碱光电阴极实验,经测量,多碱光电阴极的阈值饱和激光能量密度约为2μJ/cm~2,这表明空间电荷效应是限制其光电子发射能力的主要因素。     

复合固体推进剂等效力学性能VCFEM细观预示方法

根据固体推进剂的细观结构特征,采用等圆最优装载方式生成代表性体积单元(Representative Volume Element,RVE)模型,并结合Voronoi单元有限元方法(Voronoi Cell Finite Element Method,VCFEM)和均匀化方法,发展了一种可预示固体推进剂等效力学性能的数值分析方法,从而得到体分比和组分材料对等效模量和等效泊松比的影响规律。为证明该方法的有效性,设计一个对称数值模型,通过对该方法和传统有限元方法的节点位移结果的比较,发现两者之间的相对误差小于5%,且VCFEM用少量单元就完成了分析,提高了计算效率。通过对不同细观结构下推进剂RVE模型的计算,发现随着夹杂体分比的增大,夹杂的颗粒增强效应越明显,基体材料的变化比夹杂材料对等效力学性能有着更加显著的影响。     

强爆轰驱动超高速碎片发射装置设计因素分析

为了得到发射装置设计因素和超高速碎片性能间的关系,考虑了药型罩的材料、炸药种类、装药长径比、药型罩的锥角、药型罩的厚度、药型罩顶部靠近装药侧的曲率半径等设计因素,采用AUTODYNTM,结合正交试验,对超高速碎片的发射过程进行数值模拟。结果表明,3种发射装置结构分别可以提供质量为1. 533 g的紫铜碎片、速度为11. 649 km/s的铝碎片、动能为85. 6 k J的铝碎片; 2种发射装置结构均可以提供质量大于1 g、速度高于11 km/s的密实结构圆柱状碎片。验证了仿真方法的可信性,对影响碎片性能的设计因素进行了分析、排序,并得到了这些设计因素与碎片质量、速度、动能的关系。     

结合全局与局部信息的主动轮廓分割模型

针对传统的基于区域的主动轮廓模型在分割灰度不均匀图像和噪声图像存在效果不佳的问题,提出结合全局项与局部项的主动轮廓分割模型。全局项由CV(Chan-Vese)模型的保真项构成,局部项的构建考虑局部区域信息的同时引入反映图像灰度特性的局部熵信息。依据图像灰度的特点,选择合理的全局项和局部项参数,并加入正则项保证曲线在演化过程中保持平滑,保障分割结果的可靠性。通过变分水平集方法最小化能量泛函,依据梯度下降流迭代更新水平集,完成曲线演化。采用模拟图像和实际图像进行实验分析,结果表明,所提出的结合全局项和局部项的主动轮廓模型可以高效地分割噪声严重以及灰度分布不均匀的图像。