爆磁压缩发生器延时控制系统的分析与改进

延时控制系统是保证爆磁压缩发生器运行的关键部件,介绍了传统平板型开关延时控制系统的工作机制,分析了其优缺点。在此基础上,通过理论和实验研究,对平板型开关延时控制系统进行了改进,采用固化的同轴式导爆索接通开关,提出了一种符合爆磁压缩发生器工作要求的同轴型开关延时控制系统,测量了导爆索的爆速和固化开关的导通时间,并在爆磁压缩实验中对该延时控制系统的性能进行了验证。     

闸刀开关过载火灾危险性研究

通过实验研究了不同类型的闸刀开关在不同过负荷电流条件下的温度上升情况,测量了闸刀开关在两类过负荷条件下的最高温度以及达到最高温度需要的时间,并对影响闸刀开关温度升高的因素以及达到最高温度时能否引燃周围可燃物进行了分析讨论。实验结果显示,闸刀开关在Ⅱ类过负荷条件下的火灾危险性远大于在Ⅰ类过负荷条件下的火灾危险性。在同类过负荷电流条件下,闸刀开关的额定电流越大,过负荷倍数越大,火灾危险性也越大。     

Single channel source separation of radar fuze mixed signal based on phase difference analysis

A new method based on phase difference analysis is proposed for the single-channel mixed signal separation of single-channel radar fuze. This method is used to estimate the mixing coefficients of de-noised signals through the cumulants of mixed signals, solve the candidate data set by the mixing coefficients and signal analytical form, and resolve the problem of vector ambiguity by analyzing the phase differences. The signal separation is realized by exchanging data of the solutions. The waveform similarity coefficients are calculated, and the time–frequency distributions of separated signals are analyzed. The results show that the proposed method is effective.     

超声速转弯流道内的迟滞现象

采用特征线法,通过预先给定中心线马赫数分布,设计了消波的二维超声速转弯流道。研究了不同反压作用下转弯流道内的激波串结构、壁面沿程静压分布和壁面分离区演化等特征,分析了流道内激波串波结构与反压的关系,发现了激波串波头很难稳定在流道拐点附近。当激波串波头靠近流道拐点时,流场具有双解。流动双解区向单解区演化过程中,伴随有大分离区在上、下壁面之间的迅速转换和激波串结构的快速演化。     

基于Kalman滤波器的放大转发双向中继联合信道估计方法

针对遵从放大转发协议的双向中继网络的联合信道估计问题,提出了一种基于Kalman滤波器的新方法。首先根据联合信道构成特点将其划分为自干扰部分及传输部分,通过AR模型对这两部分自相关函数进行近似化处理,建立了联合信道时变过程的状态方程,结合接收的训练序列信号,给出了具有Kalman滤波器形式的估计方法。随后在证明了该方法的一致收敛性质的同时,列出了误差性能限所满足的Riccati方程表达式。仿真结果表明,新估计方法相比于最大似然方法在均方误差方面具有明显的性能优势。     

一种基于最小生成树的无线多跳网络信道分配算法

为提高无线多跳网络的吞吐量和传输可靠性,提出一种信道分配算法。该算法优先考虑最小生成树上的可用信道,为每个节点分配信道资源;然后考虑利用生成树外其他可用链路,为节点提供信道资源,以提高吞吐量。算法通过考虑每个用户的通信需求,可以充分利用空闲信道资源。仿真结果显示,相比于不考虑最小生成树外链路时,有效地提高了网络整体吞吐量。     

基于Laguerre滤波的雷达通道均衡方法

传统雷达通道均衡采用自适应FIR滤波器作为均衡器,当理想脉冲响应序列很长时,其逼近效果不理想,计算量大。Laguerre滤波器兼具FIR和IIR结构的优点,通过在单位圆内固定一极点保证了系统的稳定,又因为引入了全通滤波环节,使其能够用较少的阶数逼近长脉冲序列响应。推导了Laguerre滤波器的自适应算法,并将其应用于雷达通道均衡中,仿真实验也证明了它与传统的FIR结构相比,用更少的系数获得了更优的对消比,达到了更好的均衡效果。     

单通道相控阵雷达及类波束形成技术

针对常规相控阵雷达的馈线网络小型化问题以及由发射高增益定向波束引起雷达信号被截获概率较大的问题,提出了一种新的相控阵雷达系统。该系统的馈线网络中仅有一个带移相器的收发共用通道,在时序控制模块的控制下贯续接入各收发共用的阵元进行发射信号馈送或信号接收,同一时刻只有一个阵元与通道连接。基于此系统提出了类波束形成的概念与技术,通过各阵元依次发射时间分集的脉冲信号形成类发射波束;各阵元依次接收这些脉冲信号并进行相干脉冲积累以形成类接收波束;并通过控制移相器的相移量以及通道切换时间形成各阵元间发射或接收的相位差进而控制类波束的最大指向。仿真分析证明了该系统能以较小的硬件规模在不形成高增益定向波束的前提下具有与常规相控阵相当的性能。     

密码芯片电磁信息泄漏评估方法研究

基于半定制集成电路设计流程,提出一种对CMOS集成电路进行电磁信息泄漏评估的方法。该方法首先利用综合工具生成电路的门级网表,将门级网表中的普通单元替换为防护逻辑单元,然后利用电磁辐射仿真模型和电磁信息泄漏评估模型对集成电路进行电磁辐射仿真和信息泄漏分析。该方法能够在设计阶段对密码芯片的抗电磁旁路攻击能力进行评估,可提高密码芯片的设计效率,减少资源浪费。     

Contractual agreements for coordination and vendor‐managed delivery under explicit transportation considerations

We consider the coordination problem between a vendor and a buyer operating under generalized replenishment costs that include fixed costs as well as stepwise freight costs. We study the stochastic demand, single‐period setting where the buyer must decide on the order quantity to satisfy random demand for a single item with a short product life cycle. The full order for the cycle is placed before the cycle begins and no additional orders are accepted by the vendor. Due to the nonrecurring nature of the problem, the vendor's replenishment quantity is determined by the buyer's order quantity. Consequently, by using an appropriate pricing schedule to influence the buyer's ordering behavior, there is an opportunity for the vendor to achieve substantial savings from transportation expenses, which are represented in the generalized replenishment cost function. For the problem of interest, we prove that the vendor's expected profit is not increasing in buyer's order quantity. Therefore, unlike the earlier work in the area, it is not necessarily profitable for the vendor to encourage larger order quantities. Using this nontraditional result, we demonstrate that the concept of economies of scale may or may not work by identifying the cases where the vendor can increase his/her profits either by increasing or decreasing the buyer's order quantity. We prove useful properties of the expected profit functions in the centralized and decentralized models of the problem, and we utilize these properties to develop alternative incentive schemes for win–win solutions. Our analysis allows us to quantify the value of coordination and, hence, to identify additional opportunities for the vendor to improve his/her profits by potentially turning a nonprofitable transaction into a profitable one through the use of an appropriate tariff schedule or a vendor‐managed delivery contract. We demonstrate that financial gain associated with these opportunities is truly tangible under a vendor‐managed delivery arrangement that potentially improves the centralized solution. Although we take the viewpoint of supply chain coordination and our goal is to provide insights about the effect of transportation considerations on the channel coordination objective and contractual agreements, the paper also contributes to the literature by analyzing and developing efficient approaches for solving the centralized problem with stepwise freight costs in the single‐period setting. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006