针对DSA滑动窗口算法实现的指令Cache计时攻击

在现有的针对RSA等公钥密码的指令Cache计时攻击的研究基础上,提出了一套可行的针对DSA的指令Cache计时攻击方法,并对计时信息采集、识别、密钥恢复等环节进行了研究,给出了一种随机密钥恢复算法。搭建了攻击实验平台,利用编写的间谍程序对滑动窗口算法实现的DSA签名进行了实际攻击,验证了指令Cache计时攻击方法是可行、有效的．     

虚拟战场的实时四声道立体声合成

面向虚拟战场提出了实现实时四声道立体声合成的简化算法。针对四声道立体声的特殊性 ,首先探讨了四声道立体声系统中扬声器的配置方案。在四声道立体声系统扬声器配置方案的基础上 ,解决了单声源的表示、声强衰减及实时立体声化问题 ,然后提出一种评价混声效果的标准及一个评价声源对整个声音所作贡献的公式 ,并由此提出一个混声公式 ,从而解决了多声源环境的实时混声问题。该套算法用于应用系统 ,取得了较好的效果。     

多级安全实时数据库系统安全性与实时性需求的冲突分析

一个多级安全实时数据库系统不仅需要有安全限制,同时也要有时间约束.由于安全性与实时性需求之间冲突的存在而不可避免地产生隐蔽通道和优先倒置问题,文中首先分析多级安全实时数据库系统中实时性与安全性需求之间的冲突,而后基于HP 2PL协议,结合安全因素给出了一种解决冲突的算法.     

IP组播在实时网络中的应用

本文简要介绍了IP组播的有关内容,通过试验总结了IP组播在实时网络中的硬件设置和软件编程,并结合Cisco交换机列举了实时网络抑制IP组播泛洪的一种方法,最后指出了IP组播技术的难点及应注意的事项。     

熵、信息与战略欺骗

熵最初用于描述宏观物理系统的热力学状态,之后被广泛应用于控制论、概率论、数论、天体物理、生命科学等领域,但是在军事领域的应用研究还很少。以熵、信息等基本概念为基础探讨军事领域中在战略欺骗方面的应用,通过对战略欺骗的热力学分析,提出了负信息馈送原理,并给出了两种实施战略欺骗的操作技术。     

多孔陶瓷膜通道布置CFD优化

针对目前常用陶瓷膜通道布置形式存在的问题,提出了一种陶瓷膜新构型,并利用CFD/Fluent软件对纯水在该陶瓷膜构型与传统陶瓷膜构型中的渗透流动过程进行了仿真对比.通过对纯水流动压力及速度变化的分析,得出陶瓷膜新构型能够很好地解决内层通道、外层通道靠近内层通道侧部分对纯水通量贡献不大的问题,提高了纯水通量,对拓展陶瓷膜...     

A reusable planar triggered spark-gap switch batched-fabricated with PCB technology for medium-and low-voltage pulse power systems

Triggered spark-gap switch is a popular discharge switch for pulse power systems. Previous studies have focused on planarizing this switch using thin film techniques in order to meet the requirements of compact size in the systems. Such switches are one-shot due to electrodes being too thin to sufficiently resist spark-erosion. Additionally, these switches did not employ any structures in securing internal gas composition, resulting in inconsistent performance under harsh atmospheres. In this work, a novel planar triggered spark-gap switch (PTS) with a hermetically sealed cavity was batched-prepared with printed circuit board (PCB) technology, to achieve reusability with low cost. The proposed PTS was inspected by micro-computed tomography to ensure PCB techniques meet the requirements of machining precision. The results from electrical experiments demonstrated that PCB PTS were consistent and reusable with lifespan over 20 times. The calculated switch voltage and circuit current were consistent with those derived from real-world measurements. Finally, PCB PTS was used to introduce hexanitrostilbene (HNS) pellets in a pulse power system to verify its performance.     

Research on fuze microswitch based on corona discharge effect

Abnormal voltages such as electrostatic, constant current, and strong electromagnetic signals can erro-neously trigger operation of MEMS pyrotechnics and control systems in a fuze, which may result in casualties. This study designs a solid-state micro-scale switch by combining the corona gas discharge theory of asymmetric electric fields and Peek's Law. The MEMS switch can be transferred from "off" to"on" through the gas breakdown between the corona electrodes. In the model, one of the two electrodes is spherical and the other flat, so a non-uniform electric field is formed around the electrodes. The theoretical work is as follows. First, the relation among the radius of curvature of the spherical electrode, the discharge gap, and the air breakdown voltage is obtained; to meet the low voltage (30-60 V) required to drive the MEMS switch, the radius of curvature of the spherical electrode needs to be 10-50 μm and the discharge gap between the two electrodes needs to be 9-11 μm. Second, the optimal ratio ε is introduced to parameterize the model. Finally, the corona discharge structural parameters are determined by comparing the theoretical and electric field simulation results. The switch is then fabricated via MEMS processing. A hardware test platform is built and the performing chip tested. It is found that when the electrode gap is 9 μm, the electrostatic voltage is at least 37.3 V, with an error of 2.6% between the actual and theoretical air breakdown voltages. When the electrode gap is 11 μm, the electrostatic voltage is at least 42.3 V, with an error of 10.5% between the actual and theoretical air breakdown voltages. Both cases meet the design requirements.     

AWGN信道中Turbo码的性能和仿真

主要对Turbo码的解码算法进行了研究,分析了常用的MAP解码算法,对Turbo码在AWGN信道中应用不同的解码算法进行了仿真,针对不同解码算法和解码迭代次数等因素对Turbo码性能影响进行分析,结果表明Turbo码在AWGN信道中和低信噪比条件下具有优良的性能。     

提高MIMO系统容量的检测算法研究

为了满足通信容量的需求,在发射端和接收端设置多元素天线阵列构成多输入多输出系统,可以显著提高频谱的利用率.基于贝尔实验室提出的非线性迫零检测算法,提出了反向迫零检测算法.理论和仿真证明,在相同信噪比条件下,反向迫零检测算法获得的系统容量高于非线性迫零检测以及线性迫零检测算法.与奇异值分解算法相比,该算法虽然得到的系统容量有所减小,但是由于所需的运算量相对较小,因而易于实现.