多级圆柱齿轮减速器等强度优化方法研究

针对工程机械和通用后勤装备中的标准圆柱齿轮减速器互换性极差,各齿轮存在较大的强度差和寿命差的特点,建立了标准直齿圆柱齿轮和标准斜齿圆柱齿轮的几何和强度优化设计的数学模型,结合优化设计的相关理论,提出了按齿轮应力最小的等强度优化方法;并运用Matlab优化工具箱对某后勤装备中使用的三级式标准圆柱齿轮减速器进行了等强度优化设计。结果表明,使用该优化设计方法既可保证齿轮强度有较大的安全裕量,又使所有齿轮寿命尽可能相等,从而具有良好的经济性并充分发挥所有齿轮的性能。     

刚性夹杂双周期分布的反平面问题

在遵循复合材料中各夹杂相互影响的条件下,构造呈双周期分布且相互影响的椭圆形刚性夹杂模型的复应力函数,采用复变函数的依次保角映射方法,达到满足各个夹杂的边界条件,利用围线积分将求解方程组化为线性代数方程组,推导出了椭圆形刚性夹杂呈双周期分布的界面应力解析表达式,并讨论了夹杂间距对界面应力最大值（应力集中系数）的影响规律,描绘出了曲线。     

固体火箭发动机长期贮存热载荷的有限元分析方法

分析了固体火箭发动机药柱在长期贮存过程中,由于温度载荷谱的变化所引起的力学响应。基于粘弹性积分蠕变型本构关系,推导了能分析粘弹结构的热载荷的有限元模型,并用它分析了梁、厚壁圆筒与真实固体火箭发动机的热应力问题。     

引信全电子安全系统失效分析及评估

本文根据全电子安全系统的一般结构模式,分析了其安全性设计的一般特点和可能造成其失效的各种原因,并在此基础上建立了全电子安全系统的失效故障树,给出了失效概率的定量计算结果。     

平面交叉杆系变形协调普适方程及其通解

本文运用拓扑学、微分学、几何学的数学方法,捕捉到平面三交叉杆系的变形特点——拓扑特征.在小变形条件下,通过变换得到变形协调普适方程.从而推导出解此类拉压超静定问题的一种快速有效方法.该方法可直接应用于教学与工程计算.     

机械零件可靠性在应力-强度分布特性下的计算模型

根据应力-强度分布特性下的干涉理论,确定了机械零件在应力-强度诸分布情形下的可靠性计算模型,将应力、强度、结构和可靠性计算联系起来。     

Coherent systems based on sequential order statistics

The sequential order statistics (SOS) are a good way to model the lifetimes of the components in a system when the failure of a component at time t affects the performance of the working components at this age t. In this article, we study properties of the lifetimes of the coherent systems obtained using SOS. Specifically, we obtain a mixture representation based on the signature of the system. This representation is used to obtain stochastic comparisons. To get these comparisons, we obtain some ordering properties for the SOS, which in this context represent the lifetimes of k‐out‐of‐n systems. In particular, we show that they are not necessarily hazard rate ordered. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

Periodic review inventory management with contingent use of two freight modes with fixed costs

We study a stochastic inventory model of a firm that periodically orders a product from a make‐to‐order manufacturer. Orders can be shipped by a combination of two freight modes that differ in lead‐times and costs, although orders are not allowed to cross. Placing an order as well as each use of each freight mode has a fixed and a quantity proportional cost. The decision of how to allocate units between the two freight modes utilizes information about demand during the completion of manufacturing. We derive the optimal freight mode allocation policy, and show that the optimal policy for placing orders is not an (s,S) policy in general. We provide tight bounds for the optimal policy that can be calculated by solving single period problems. Our analysis enables insights into the structure of the optimal policy specifying the conditions under which it simplifies to an (s,S) policy. We characterize the best (s,S) policy for our model, and through extensive numerical investigation show that its performance is comparable with the optimal policy in most cases. Our numerical study also sheds light on the benefits of the dual freight model over the single freight models. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

基于聚类算法的多无人机系统任务分配

针对现有任务分配方法在任务点较多时不易解算,且计算量大的问题,提出了基于模糊C-均值聚类算法的多无人机系统任务分配方法.首先,利用模糊C-均值聚类算法得到的隶属度矩阵对任务点进行初始分配;其次,针对基于空间划分聚类可能造成各UAV任务不均衡的问题,设计任务的局部优化调整规则;最后,结合单旅行商问题,利用Tabu Sea...     

Quantifying the performance effects of idle time utilization in multiserver systems

In many practical multiserver queueing systems, servers not only serve randomly arriving customers but also work on the secondary jobs with infinite backlog during their idle time. In this paper, we propose a c‐server model with a two‐threshold policy, denoted by (e d), to evaluate the performance of this class of systems. With such a policy, when the number of idle servers has reached d (<c), then e (<d) idle agents will process secondary jobs. These e servers keep working on the secondary jobs until they find waiting customers exist in the system at a secondary job completion instant. Using the matrix analytic method, we obtain the stationary performance measures for evaluating different (e, d) policies. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2007.