基于ANSYS／LS—DYNA的电子装备爆炸冲击振动损伤建模研究

针对电子装备爆炸冲击振动损伤问题，设计了损伤模拟的基本方案；采用ANSYS／LS—DYNA建立了二维“爆炸源-地面-弹性体-电子装备”模型；通过模型试验，获得了与实际爆炸冲击振动特性相吻合的加速度、位移和应力等数据。     

穿甲弹对自行火炮易损性分析与计算

分析了自行火炮在穿甲弹作用下的易损性,建立了自行火炮易损性计算模型,并以某型自行火炮为例,分别计算了该炮在120mm穿甲弹正面命中与侧面命中时的毁伤概率。     

切向空气气流对激光辐照碳纤维复合材料的影响

实验研究了靶材表面存在和不存在切向空气气流时,975nm连续激光对碳纤维增强树脂基复合材料的辐照效应,发现切向气流的加载有利于激光对碳纤维复合材料的破坏.从理论上对激光辐照下碳纤维复合材料的破坏机理进行了初步分析,基于碳的氧化特性和氧化反应机理,推导了碳纤维的氧化速率方程.采用改进的光滑粒子方法,对激光辐照下复合材料树...     

Optimal control of an M/G/1 queue with impatient priority customers

An optimal operating policy is characterized for the infinite‐horizon average‐cost case of a single server queueing control problem. The server may be turned on at arrival epochs or off at departure epochs. Two classes of customers, each of them arriving according to an independent Poisson processes, are considered. An arriving 1‐customer enters the system if the server is turned on upon his arrival, or if the server is on and idle. In the former case, the 1‐customer is selected for service ahead of those customers waiting in the system; otherwise he leaves the system immediately. 2‐Customers remain in the system until they complete their service requirements. Under a linear cost structure, this paper shows that a stationary optimal policy exists such that either (1) leaves the server on at all times, or (2) turns the server off when the system is empty. In the latter case, we show that the stationary optimal policy is a threshold strategy, this feature being commonplace in most of priority queueing systems and inventory models. However, the optimal policy in our model is determined by two thresholds instead of one. © 2001 John Wiley & Sons, Inc. Naval Research Logistics 48: 201–209, 2001     

核武器毁伤概率pij计算的一种改进方法

在核火力运用研究的最优瞄准点选择计算中 ,核武器对目标毁伤概率 pij的计算是至关重要的。在 Gauss-L egendre求积方法的基础上 ,提出计算核武器毁伤概率 pij的一种改进方法 ,经计算证明 :此方法计算速度快且精度高。     

Determining a threshold control policy for an imperfect production system with rework jobs

Consider a threshold control policy for an imperfect production system with only a work center handling both regular and rework jobs. An imperfect production system studied here, generates defect jobs by factors other than machine failures. A threshold control or (ω, s) policy sets the guideline for a work center to switch between regular and rework jobs. A production cycle begins with loading and processing of several batches of regular jobs with a lot size equal to s. The outcome of each completed regular job is an independent Bernoulli trial with three possibilities: good, rework, or scrap. Once the work center accumulates more than a threshold ω of rework jobs, it finishes the last batch of regular jobs and switches to rework jobs. The objective of this research is to find a threshold ω and a lot size s that maximize the average long‐term profit. The ultimate goal is to construct a simple algorithm to search for ω and s that can be implemented directly in production management systems, as a result of this work. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 273–301, 1999     

基于能量耗散的药柱粘弹性累积损伤

基于不可逆能量耗散的损伤变量定义方法和动态线粘弹性理论,建立了固体推进剂累积损伤模型,利用不同拉伸速率下的试验数据,拟合得到了推进剂破坏耗散能表达式,进而给出了推进剂在周期应力响应下的累积损伤计算式,并讨论了周期应力幅值和频率对累积损伤的影响,最后对某舰载发动机药柱进行了累积损伤及使用寿命分析。提出的累积损伤分析方法,为固体发动机贮存寿命预估提供了一条有益的技术途径。     

军事软毁伤效应综合评估与决策分析

军事打击不但可以直接毁伤敌方政治、军事目标,而且可以造成敌方社会秩序混乱、经济发展受挫、人民心理恐慌等军事软毁伤效应。军事软毁伤效应在未来信息化战争中很有可能达成显著的战略目标,因此,研究军事软毁伤效应具有重要而现实的意义。依据软毁伤理论,建立了军事软毁伤效应的综合评估指标体系,给出了一种军事软毁伤效应的综合评估模型,并设计了综合评估决策支持系统。     

二值化联合变换相关器识别复杂背景目标时的阈值选取

讨论了利用二值化联合变换相关器对复杂背景目标进行相关识别的阈值选取问题。由于不同阈值对二值化联合变换相关器识别结果有很大的影响,阈值过高,会损失过多的联合变换功率谱中的有效成份,使相关峰减弱;阈值过低,会使联合功率谱中的噪声放大,相关峰可能被淹没在噪声之中。因而存在一个最佳阈值。实验表明,最佳阈值位于联合功率谱最大灰度值的40%～50%之间,在此阈值范围内,相关峰值较高,噪声也得到有效抑制。     

基于功能树的导弹打击系统目标瞄准点选择方法

针对导弹打击系统目标的问题,建立了基于目标功能损伤度的瞄准点选择方法;在对毁伤树方法进行改进的基础上,提出了描述目标结构与工作流程的目标功能树模型,构造出体现目标整体功能下降的优化目标函数,采用模拟退火算法搜索最优解。通过算例对不同的瞄准点选择方案进行比较,发现考虑目标的功能结构特点时,得到的瞄准点明显优于其它方案。