屏蔽网遮挡电磁干扰效果评估研究

采用计算机仿真实验和实装对抗试验相结合的方法,完成了屏蔽网遮挡低仰角电磁干扰效果的评估。首先推导了绕射数学公式,建立了数学模型,并进行了计算机仿真实验。通过实装对抗试验检验了屏蔽网遮挡低仰角电磁干扰效果,通过比对分析仿真结果和实装对抗试验数据,结果基本一致,证明了采用的评估方法科学可行,给出了屏蔽网遮挡低仰角电磁干扰的效果。     

改进类电磁算法在武器目标分配问题中的应用

通过基于级数的粒子编码变换方法,将武器目标分配问题的约束条件进行了化简.对原始类电磁算法,在种群初始化、局部搜索、合力计算以及粒子移动等各步骤对其进行改造,使之适应武器目标分配问题的整数解空间.最后通过数值实验验证了该改造后算法解决武器目标分配问题的有效性.     

坦克外壳对内部电磁波的影响及其振荡干扰波型的数值计算

在坦克的金属立方体盒子模型下,分析了坦克外壳对内部电磁波的影响,并对Lc型电路激发的电磁波在坦克内部形成的振荡波型进行了计算,分析了该类电磁振荡波对坦克内部其他电子元件产生电磁干扰的作用机理,对一种最低频率的谐振波型进行了仿真模拟,提供了对坦克内部电磁波电场分量及磁场分量的一种分析计算方法,为研究坦克内部电子设备的电磁干扰规律提供了思路,对提高坦克的电磁兼容性能具有一定参考意义。     

光学波导中原子干涉的加速度测量

提出一种水平方向、光学波导中原子干涉的加速度测量方案。详细介绍了光路结构、原子团制备以及光学波导的绝热装载等。通过实验手段对测量方案进行验证,首先将~(87)Rb原子团冷却至50 nK的玻色爱因斯坦凝聚态,随后对超冷原子团施加布拉格光进行分束、合束,完成原子干涉过程。实验结果显示,所提干涉测量系统能够实现单轴加速度测量,对未来高精度多轴加速度测量系统的研制具有指导借鉴意义。     

Theoretical and numerical simulation study on jet formation and penetration of different liner structures driven by electromagnetic pressure

The use of a shaped liner driven by electromagnetic force is a new means of forming jets. To study the mechanism of jet formation driven by electromagnetic force, we considered the current skin effect and the characteristics of electromagnetic loading and established a coupling model of"Electric—Magnetic—Force"and the theoretical model of jet formation under electromagnetic force. The jet formation and penetration of conical and trumpet liners have been calculated. Then, a numerical simulation of liner collapse under electromagnetic force, jet generation, and the stretching motion were performed using an ANSYS multiphysics processor. The calculated jet velocity, jet shape, and depth of penetration were consistent with the experimental results, with a relative error of less than 10％. In addition, we calculated the jet formation of different curvature trumpet liners driven by the same loading condition and ob-tained the influence rule of the curvature of the liner on jet formation. Results show that the theoretical model and the ANSYS multiphysics numerical method can effectively calculate the jet formation of liners driven by electromagnetic force, and in a certain range, the greater the curvature of the liner is, the greater the jet velocity is.     

热真空条件下工作的电气电缆载流量计算与试验

高空制导飞行器从母舱释放后,制导舱与仪器舱之间部分电气电缆处于热真空条件下工作。对此种特定条件下的电缆进行了载流量计算。理论计算表明,给定的电缆设计满足在热真空条件下正常工作要求。最后简略介绍了载流量试验。     

基于效能的舰艇电子对抗训练效果评估方法

摘 要：为解决舰艇电子对抗专业训练缺乏统一评估标准与方法体系等实际评估难题;采用系统分析方法结合舰艇电子对抗专业训练实际;研究提出了基于“任务要求分解”的作战效能量化指标体系构建方法、训练效果表达方法及实用评估指标体系、定量指标评估模型、评估标准等舰艇电子对抗训练效果评估方法体系;能够满足专业训练效果评估所需,对其它专业军事训练效果评估工作亦具有借鉴意义。     

Experiment and simulation of launching process of a small-diameter steel cartridge case

In order to explore the rules of the deformation force during the launching of a small-diameter steel cartridge, the semi-closed bomb test method is used to test the greatest strains on chamber outer wall under the different chamber pressures. The pressure curves of cartridge chamber are measured in experiment, and the tensile test data of cartridge are loaded into the numerical calculation to compare with the experimental data. The conclusion was obtained that the calculated results match better with the experimental results by considering strain rate bilinear kinematic hardening material constitutive model. The forces on the various parts of the cartridge during launching and their deformation rules are achieved, in which the equivalent plastic strain decreases and the cylinder ring withstands the maximum equivalent stress when the cartridge case clings to the bore from the mouth to the bottom.     

On the continued acceleration of bomb casing fragments following casing fracture

It has been said that, once a bomb casing has fractured, “detonation gases will then stream around the fragments or bypass them, and the acceleration process stops there.” However, while apparently copious gas flow through casing fractures indicates some pressure release, it is also an indication of significant gas drive pressure, post casing fracture. This paper shows two approaches to the problem of calculating the actual loss of drive. One presents first-order analytical calculations, in cylindrical geometry, of pressure loss to the inside surface of a fractured casing. The second shows the modelling of a selected example in the CTH code. Both approaches reveal that gas escape, while occurring at its own sound-speed relative to the adjacent casing fragments, has to compete with rapid radial expansion of the casing. Together with some historic experiments now publicly available, our calculations indicate that post-fracture casing fragment acceleration is, for most systems, unlikely to be reduced significantly.     

浅析储油罐安全容量的确定计算

由于油料具有热膨胀性,在运输和储存期间,如果油罐装油超过安全容量,当温度升高时,罐内油料体积膨胀,就可能导致溢油事故的发生,不仅造成油料数量的损失,甚至会引发火灾事故。正确确定不同油罐的安全容量,对油料的安全具有重要意义。文章阐述了油罐安全容量的概念,分析了安全容量计算不准确可能造成的危害,提出了油罐安全容量的计算方法。