恒压变频控制设备在消防水灭火系统中的应用

分析了传统消防水灭火系统存在易锈死难改造等问题,介绍了恒压变频供水系统的基本工作原理和设计思路,论证了恒压变频供水系统在消防水灭火系统中应用的可行性,研究了将恒压变频控制设备应用到消防水灭火系统中应注意的几个问题,为改进消防水灭火系统提供了又一方法。     

Dynamic server assignment policies for assembly‐type queues with flexible servers

We seek dynamic server assignment policies in finite‐capacity queueing systems with flexible and collaborative servers, which involve an assembly and/or a disassembly operation. The objective is to maximize the steady‐state throughput. We completely characterize the optimal policy for a Markovian system with two servers, two feeder stations, and instantaneous assembly and disassembly operations. This optimal policy allocates one server per station unless one of the stations is blocked, in which case both servers work at the unblocked station. For Markovian systems with three stations and instantaneous assembly and/or disassembly operations, we consider similar policies that move a server away from his/her “primary” station only when that station is blocked or starving. We determine the optimal assignment of each server whose primary station is blocked or starving in systems with three stations and zero buffers, by formulating the problem as a Markov decision process. Using this optimal assignment, we develop heuristic policies for systems with three or more stations and positive buffers, and show by means of a numerical study that these policies provide near‐optimal throughput. Furthermore, our numerical study shows that these policies developed for assembly‐type systems also work well in tandem systems. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

一种惯性器件常值误差对系统误差影响的分析方法

在平台式惯性导航系统中,陀螺仪和加速度计的常值误差是制约系统最终精度的重要因素之一。通过分析在无阻尼惯性导航系统中,惯性器件对平台误差角、速度误差和定位误差的影响,给出了在初始对准后,因惯性器件常值误差引起的系统固有误差和这类固有误差随时间的变化规律。结果表明,除经度误差随时间有振荡发散现象外,其它误差均为周期振荡有界。利用给出的结论,在设计惯性导航系统时通过分析系统误差要求,对于选择惯性器件具有一定的借鉴意义。     

罗兰C双台链交叉定位算法研究

在推导罗兰C双台链交叉定位算法基础上,根据试验得到的时差测量结果进行了单台链双曲线定位、非时基交叉圆定位以及双台链交叉定位算法比较.结果表明:测量点几何因子GDOP较好时,单台链双曲线定位与交叉圆定位方法的定位结果基本相同,而GDOP较差时,交叉圆定位方法的定位结果明显优于单台链双曲线定位算法的定位结果,但两种情况下的...     

励磁突变对无刷励磁同步发电机整流系统负载电流的影响

分析了无刷励磁同步发电机整流系统突加/突卸励磁时的过渡过程,得到了影响负载电流上升和下降时间的主要时间常数,并对理论分析结果进行了仿真和实验研究,仿真结果与理论分析吻合良好.实验波形所反映的变化趋势亦与仿真及理论分析结果较为符合.     

双线性表面建模电大目标RCS仿真

目标的电磁散射特性研究对于实现雷达探测、识别、跟踪目标起着至关重要的作用,而雷达散射截面(Radar Cross Section,RCS)又是体现目标电磁散射特性的一个重要方面.参数曲面能精确模拟目标的几何外形,提高计算精度.采用参数曲面——双线性表面建模,运用物理光学(Physical Optics,PO)法计算电大...     

水下近场非接触爆炸载荷作用下加筋板毁伤变形的数值仿真研究

采用高动态非线性有限元程序MSC.Dytran对复杂加筋板结构在水下爆炸载荷下的动态响应和变形模式进行了仿真分析和模型试验,建立了复杂加筋板架结构水下爆炸作用下动态响应的有限元计算方法.研究了加筋板在水下爆炸载荷下的不同毁伤形式,并利用有限元程序对复杂毁伤形式进行了瞬态毁伤过程分析,认为一定药量近距离爆炸时局部破坏要先于整体破坏.     

Comparison between constant‐stress and step‐stress accelerated life tests under Time Constraint

By running life tests at higher stress levels than normal operating conditions, accelerated life testing (ALT) quickly yields information on the lifetime distribution of a test unit. The lifetime at the design stress is then estimated through extrapolation using a regression model. In constant‐stress testing, a unit is tested at a fixed stress level until failure or the termination time point of test, whereas step‐stress testing allows the experimenter to gradually increase the stress levels at some prefixed time points during the test. In this work, the optimal k‐level constant‐stress and step‐stress ALTs are compared for the exponential failure data under complete sampling and Type‐I censoring. The objective is to quantify the advantage of using the step‐stress testing relative to the constant‐stress one. Assuming a log‐linear life–stress relationship with the cumulative exposure model for the effect of changing stress in step‐stress testing, the optimal design points are determined under C/D/A‐optimality criteria. The efficiency of step‐stress testing to constant‐stress one is then discussed in terms of the ratio of optimal objective functions based on the information matrix. © 2013 Wiley Periodicals, Inc. Naval Research Logistics 00: 000–000, 2013     

多雷达观测信号融合检测算法

针对海上小目标检测问题提出了一种基于多雷达观测信号层融合的检测算法。该算法对各个雷达的观测值按采样时刻进行排序,然后根据对应时刻的脉冲信号进行高阶互累积量计算然后在相关域上积累进行似然比检测。仿真分析表明该算法与基于贝叶斯准则的分布式检测算法相比,具有较低的复杂度和低信噪比条件下较高的目标检测概率。     

最低价中标情况下的施工管理研究

最低价中标法作为国际上通行的建筑工程招投标方法,随着我国建筑市场的 发展和工程量清单计价制度的推行,已经具备其实施的客观条件。针对目前实施最低价中 标法工程施工阶段存在的问题,提出结合工程量清单计价从合同管理、保证金制度、工程保 险、质量管理等方面提出了解决的思路。