独立分量分析在液体火箭发动机故障检测中的应用

针对液体火箭发动机试车中,因噪声干扰、不同源信号之间的混叠而造成的信号信噪比低、信号分析和特征提取难度大的问题,提出采用独立分量分析(ICA)法对液体火箭发动机试车信号进行分离,以提高信号的信噪比,并能实时反映各子系统工作过程,为数据分析、特征提取和故障检测与诊断提供可靠的信号。通过对某型液体火箭发动机热试车压强信号进行实例分析,验证了该方法的有效性。     

Numerical studies on four-engine rocket exhaust plume impinging on flame deflectors with afterburning

This paper studies the four-engine liquid rocket flow field during the launching phase. Using three-dimensional compressible Navier-Stokes equations and two-equation realizable k-epsilon turbulence model, an impact model is established and flow fields of plume impinging on the two different shapes of flame deflectors, including wedge-shaped flame deflector and cone-shaped flame deflector, are calcu-lated. The finite-rate chemical kinetics is used to track chemical reactions. The simulation results show that afterburning mainly occurs in the mixed layer. And the region of peak pressure occurs directly under the rocket nozzle, which is the result of the direct impact of exhaust plume. Compared with the wedge-shaped flame deflector, the cone-shaped flame deflector has great performance on guiding exhaust gas. The wedge-shaped and cone-shaped flame deflectors guide the supersonic exhaust plume away from the impingement point with two directions and circumferential direction, respectively. The maximum pressure and temperature on the wedge-shaped flame deflector surface are 37.2% and 9.9% higher than those for the cone-shaped flame deflector. The results provide engineering guidance and theoretical significance for design in flame deflector of the launch platforms.     

A novel launch dynamics measurement system for multiple launch rocket system and comparative analysis with numerical simulations

In this paper,a novel launch dynamics measurement system based on the photoelectric sensor pair is built.The actual muzzle time(i.e.a time duration that originates from the initial movement to the rocket's departure from the muzzle)and the muzzle velocity are measured.Compared with the classical methods,the actual muzzle time is obtained by eliminating the ignition delay.The comparative analysis method is proposed with numerical simulations established by the transfer matrix method for multibody systems.The experiment results indicate that the proposed measurement system can effectively measure the actual muzzle time and reduce the error of classical methods,which match well with the simulation results showing the launch dynamics model is reliable and helpful for further analysis and design of the MLRS.     

固冲发动机补燃室凝相碳颗粒燃烧研究

应用改进的移动火焰锋面(MFF)模型,分析了环境压力、温度等参数对碳颗粒燃烧过程的影响。在此基础上,研究了固冲发动机补燃室内碳颗粒的燃烧过程,得到了固冲补燃室环境中的碳颗粒燃烧特性,并通过固冲直连式试验验证了数值模拟结果。结果表明:补燃室中大部分碳颗粒在进气道出口附近燃烧。     

火箭助飞鱼雷入水姿态角海上测量方法探讨

为了解决火箭助飞鱼雷入水姿态角度海上测量这一技术难点,该文避开传统方法,另辟思路,应用高速摄影技术对火箭助飞鱼雷入水过程在两个垂直方向上进行摄像,采用事后图像处理分析方法,对所提出的火箭助飞鱼雷的入水姿态角角海上测量方法加以探讨,并以算例分析了误差影响,从结果的解算过程可看出,这种新方法切实可行。     

涡轮泵实时故障检测的时间编码信号处理方法研究

为了提高液体火箭发动机涡轮泵实时故障检测的有效性,通过取消对胞元长度限制和提出新的编码计算方法,提出了一种改进的时间编码信号处理方法,并将其应用于涡轮泵振动信号的实时特征提取.通过正常和异常涡轮泵历史试车稳态过程的振动数据对该方法的稳定性和故障检测有效性进行了验证,结果表明,基于时间序列编码的信号处理方法可以有效提取故障特征,可用于涡轮泵故障的实时检测.     

非壅塞固体火箭冲压发动机及其贫氧推进剂

研究了非壅塞固体火箭冲压发动机的工作特性。研制出了能量高、燃速高、燃速压强指数高、低压燃烧性能好的铝镁贫氧推进剂配方。采用连管式试验与数值分析相结合的方法 ,对非壅塞固体火箭冲压发动机性能进行了系统的研究