Burning characteristics of microcellular combustible objects

Microcellular combustible objects for application of combustible case, caseless ammunition or combustible detonator-holding tubes are fabricated through one-step foaming process, in which supercritical CO₂ is used as foaming agent. The formulations consist of inert polymer binder and ultra fine RDX. For the inner porous structures of microcellular combustible objects, the cell sizes present a unimodal or bimodal distribution by adjusting the foaming conditions. Closed bomb test is to investigate the influence of both porous structure style and RDX content on burning behavior. The sample with bimodal distribution of cell sizes burns faster than that with unimodal distribution, and the concentration of RDX can influence the burning characteristics in a positive manner. In addition, the translation of laminar burning to convective burning is determined by burning rate versus pressure curves of samples at two different loading densities, and the resulting transition pressure is 30 MPa. Moreover, the samples with bigger sample size present higher burning rate, resulting in providing deeper convective depth. Dynamic vivacity of samples is also studied. The results show that the vivacity increases with RDX content and varies with inner structure.     

化工园区远程供水系统的应用研究

化工园区一直是大型和超大型火灾的高发地,而这些地方一旦发生火灾,很难在短时间内扑灭,这就需要灭火现场有充足的水源供灭火设备使用。在化工园区火灾案例分析基础上,对远程供水系统作了简要介绍,结合安徽八一化工厂案例,对远程供水系统在具体应用中水源选取、流量选择等内容进行了分析,并分析了输水过程中的水压损失,为远程供水系统在化工园区的选择和应用提供了理论帮助。     

信息机房自动灭火系统改造方案研究

从某信息机房自动灭火系统改造入手,探讨了高价值电子信息机房内自动灭火系统及灭火剂的选型,并提供了相应的技术改造方案,可为同类电子机房自动灭火系统的规划和设计提供参考。     

关于民用建筑中湿式喷水灭火系统设置与管理的探讨

随着建筑业的快速发展及消防法规的逐步完善,自动喷水灭火系统也得到了广泛的应用.但在实际配置使用过程中,各级消防监督管理部门也发现了一些新的问题,为充分发挥自动喷水灭火系统的功效,保护人民生命财产安全,就民用建筑中湿式自动喷水灭火系统设置与管理提出了一些建议.     

大攻角下无安定器航弹的气动特性

在横流理论和wardlaw集中涡法的基础上,通过采用一组合适的自由参数,用半经验半理论的方法计算了无安定器航弹在大攻角情况下的气动特性。计算过程中考虑了不同转速对力与力矩的影响,并对结果作出了分析。     

电视制导小灵巧炸弹三维导引律

小灵巧炸弹是一种采用倾斜转弯(BTT)控制方式的小型面对称电视制导航空弹药,在实际飞行中必须确保其导引头框架角不超出可用范围。针对上述问题,根据时变偏置比例导引的思想,在三维空间中设计视线角速率偏置项,通过姿态角时变修正实现框架角约束,提出了一种带导引头框架角约束的三维纯比例导引律。仿真结果表明该方法在保证小灵巧炸弹战技指标要求的同时有效减少了框架角需求。     

Numerical study on the case effect of a bomb air explosion

When considering the bomb explosion damage effect, the air shock wave and high-speed fragments of the bomb case are two major threats. In experiments, the air shock wave was studied by the bare ex-plosives superseding the real cased bomb; in contrast, the bomb case influence was ignored to reduce risk. The air explosion simulations of the MK84 warhead with and without the case were conducted. The numerical simulation results showed that the bomb case significantly influenced the shock wave generated by the bomb: the spatial distribution of shock wave in the near field changed, and the peak value of shock wave was reduced. Breakage of the case and kinetic energy of the fragmentation consumed 3 and 38% of the explosion energy, respectively. The increasing factors of the peak over-pressure induced by the bare explosive on the ground and in the air were 1.43-3.04 and 1.37-1.57, respectively. Four typical stages of case breakage were defined. The mass distribution of the fragments follows the Mott distribution. The initial velocity distribution of the fragments agreed well with the Gurney equation.     

激光制导炸弹投放域分析

以某型激光制导航空炸弹为例,进行了三维动态数字仿真研究.建立激光制导炸弹空间六自由度运动方程组,激光制导炸弹控制系统数学模型和控制信号的形成模型,用拟合技术求解气动力因数,仿真计算了水平投放时的投放域,并对影响攻击区边界的因素和影响制导精度的因素进行了分析和讨论.对激光制导炸弹的研制提出了几点建议.     

侵彻子母弹打击机场目标毁伤阈值确定方法

通过对机场目标的结构及地地常规导弹毁伤要求的分析,结合侵彻爆破子母弹战斗部毁伤机理,根据机场各主要子目标的材料、抗毁特性来选取相适应的毁伤效果指标.在此基础上,构造了不同作战任务要求下的侵彻爆破子母弹毁伤机场目标的耗弹量算法模型.为常规导弹武器打击机场目标耗量的最优算法提供了一种方法,具有一定的参考价值.     

自导深弹导引弹道设计与仿真

针对自导深弹自导系统设计过程中,面临的简化目标探测系统和弹体姿态控制系统的要求,设计采用自动调整提前角导引算法作为自导策略;操极限舵,采用直接由导引算法得出舵角值的弹体姿态控制方法.给出了纵平面内深弹运动学模型、目标运动学模型、深弹与目标相对运动模型的数学描述,并在Matlab/Simulink 环境下完成了以上三个模型的实现和子模块封装, 编制了描述深弹整个自导过程的Simulink模块化程序;给出了自导深弹自动调整提前角导引方法的实现原理,并基于Simulink/StateFlow工具箱建立了该导引算法的图形化程序进行了仿真研究,验证了导引方法的有效性.