面向GPU的非结构网格有限体积计算流体力学的图染色方法优化

采用图染色方法解决通量累加和局部最大压力计算引起的两种典型资源竞争问题,并通过共享内存的使用、体编号和面编号的重排、面数据的重排三种策略优化图染色方法。针对应用在空气动力学多种规模的三维网格,分别采用双精度和单精度操作数,在Nvidia Tesla V100和K80 GPU上,展开性能测试。结果表明:共享内存的优化效果不明显;体编号和面编号重排降低了图染色方法的计算性能;面数据重排可以有效地优化图染色方法;计算性能在V100上提高20%左右,在K80上提高15%左右。     

一种RetinaNet与SE融合的航空取证目标检测算法

针对在开展航空侦察取证时缺乏自动化、智能化取证手段的情况,提出了一种基于Reti-naNet与SE融合的航空取证目标检测算法,解决目标尺度变化大、数据集中类别不均衡的问题,并通过SE (squeeze-excitations)模块引入注意力机制进一步改进性能.该改进算法中的特征金字塔网络FPN可有效应对目标尺寸变化较大...     

Periodic review inventory management with contingent use of two freight modes with fixed costs

We study a stochastic inventory model of a firm that periodically orders a product from a make‐to‐order manufacturer. Orders can be shipped by a combination of two freight modes that differ in lead‐times and costs, although orders are not allowed to cross. Placing an order as well as each use of each freight mode has a fixed and a quantity proportional cost. The decision of how to allocate units between the two freight modes utilizes information about demand during the completion of manufacturing. We derive the optimal freight mode allocation policy, and show that the optimal policy for placing orders is not an (s,S) policy in general. We provide tight bounds for the optimal policy that can be calculated by solving single period problems. Our analysis enables insights into the structure of the optimal policy specifying the conditions under which it simplifies to an (s,S) policy. We characterize the best (s,S) policy for our model, and through extensive numerical investigation show that its performance is comparable with the optimal policy in most cases. Our numerical study also sheds light on the benefits of the dual freight model over the single freight models. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

基于聚类算法的多无人机系统任务分配

针对现有任务分配方法在任务点较多时不易解算,且计算量大的问题,提出了基于模糊C-均值聚类算法的多无人机系统任务分配方法.首先,利用模糊C-均值聚类算法得到的隶属度矩阵对任务点进行初始分配;其次,针对基于空间划分聚类可能造成各UAV任务不均衡的问题,设计任务的局部优化调整规则;最后,结合单旅行商问题,利用Tabu Sea...     

Quantifying the performance effects of idle time utilization in multiserver systems

In many practical multiserver queueing systems, servers not only serve randomly arriving customers but also work on the secondary jobs with infinite backlog during their idle time. In this paper, we propose a c‐server model with a two‐threshold policy, denoted by (e d), to evaluate the performance of this class of systems. With such a policy, when the number of idle servers has reached d (<c), then e (<d) idle agents will process secondary jobs. These e servers keep working on the secondary jobs until they find waiting customers exist in the system at a secondary job completion instant. Using the matrix analytic method, we obtain the stationary performance measures for evaluating different (e, d) policies. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2007.     

Kurtosis correction method for X̄ and R control charts for long‐tailed symmetrical distributions

This paper proposes a kurtosis correction (KC) method for constructing the X? and R control charts for symmetrical long‐tailed (leptokurtic) distributions. The control charts are similar to the Shewhart control charts and are very easy to use. The control limits are derived based on the degree of kurtosis estimated from the actual (subgroup) data. It is assumed that the underlying quality characteristic is symmetrically distributed and no other distributional and/or parameter assumptions are made. The control chart constants are tabulated and the performance of these charts is compared with that of the Shewhart control charts. For the case of the logistic distribution, the exact control limits are derived and are compared with the KC method and the Shewhart method. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

GEO导航星广播星历拟合改进算法设计

设计了倾角较小的GEO导航星的广播星历拟合算法。该方法的核心思想是在常规拟合算法的基础上对位置观测量进行合理的坐标系参考平面旋转,特别是提出针对拟合迭代初值进行相应的坐标变换,从而既可以解决轨道参数拟合的相关性问题,使轨道参数拟合快速收敛,同时又兼顾了用户接收机的计算简便化。通过仿真验证,该方法简洁有效,拟合中误差RMS在厘米量级,能够保证拟合精度。     

一种支持向量机增量学习淘汰算法

针对大规模数据集的分类问题,支持向量机的训练成为一个难题。增量学习是解决这一难题的思路之一。分析了新增样本加入训练集后支持向量集的变化情况,提出了一种基于密度法的支持向量机增量学习淘汰算法,淘汰了对最终分类无用的样本,在保证测试精度的同时减少了训练时间。实验仿真证明这种算法是有效的。     

局部多孔质气浮止推轴承特性研究

在考虑轴承气膜交界面处切向速度滑移的条件下,建立了局部多孔质气浮止推轴承的理论模型,然后使用有限元算法进行了数值仿真,仿真的结果与试验结果取得了一定程度的一致性,说明此新的修改了的雷诺方程可以用来作为局部多孔质气浮止推轴承研究的理论模型。利用该模型,能够成功计算出不同渗透系数、不同厚度及不同直径的局部多孔质气浮轴承的流量、承载及刚度。还从理论上与小孔类型及全多孔质类型的气浮轴承特性进行了对比,结果表明,局部多孔质气浮轴承有着优良的特性及很好的应用前景。     

遗传算法在防空导弹火力优化分配中的应用

介绍了遗传算法的基本原理、算法设计并结合遗传算法主要解决了如何把目标分配给火力单元的问题,编写了相应的程序,并给出了一个基于遗传算法的火力优化分配方案。