Single batch machine scheduling with deliveries

We consider the problem of scheduling a set of n jobs on a single batch machine, where several jobs can be processed simultaneously. Each job j has a processing time p_j and a size s_j. All jobs are available for processing at time 0. The batch machine has a capacity D. Several jobs can be batched together and processed simultaneously, provided that the total size of the jobs in the batch does not exceed D. The processing time of a batch is the largest processing time among all jobs in the batch. There is a single vehicle available for delivery of the finished products to the customer, and the vehicle has capacity K. We assume that K = rD, where and r is an integer. The travel time of the vehicle is T; that is, T is the time from the manufacturer to the customer. Our goal is to find a schedule of the jobs and a delivery plan so that the service span is minimized, where the service span is the time that the last job is delivered to the customer. We show that if the jobs have identical sizes, then we can find a schedule and delivery plan in time such that the service span is minimum. If the jobs have identical processing times, then we can find a schedule and delivery plan in time such that the service span is asymptotically at most 11/9 times the optimal service span. When the jobs have arbitrary processing times and arbitrary sizes, then we can find a schedule and delivery plan in time such that the service span is asymptotically at most twice the optimal service span. We also derive upper bounds of the absolute worst‐case ratios in both cases. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 470–482, 2015     

机翼不对称损伤飞机在大侧滑角下的操稳特性研究

对某小型电动无人机(以下简称SEPUAV)在其左翼破损40%面积矩下的操稳特性进行详细分析。首先在此损伤下典型大侧滑角定常工作点附近进行特殊的小扰动线性化,然后进行特征根和飞行运动模态的分析;其次对此特殊构型SEPUAV进行操稳特性、时频响应特性进行分析。分析结果表明:左翼破损40%面积矩SEPUAV出现特有运动模态并影响全部纵侧向运动状态的响应;部分传递函数出现较多非最小相位零点从而导致初始响应发生反向;部分通道的Bode图中出现多个波峰波谷并有相角提前等现象。分析结果对后续容损飞行控制器的设计起到铺垫的作用。     

锥形运动控制的导弹姿态稳定性分析

针对锥形运动对弹体稳定性的影响,建立了导弹锥形运动控制的非线性数学模型,通过引入复攻角的概念,使难以用解析手段处理的非线性模型转换成可解析的一般模型。根据线性化模型分析了导弹复攻角运动方程,推导了制导控制系统参数的稳定控制域范围,分析了控制系统阻尼回路和控制回路对导弹锥形运动稳定性的影响规律,提出了锥形运动控制的稳定性判定方法。仿真结果进一步验证了该判定方法的可行性和正确性,为导弹锥形运动的制导控制系统设计提供了依据。     

数字图像复数不变矩构造及稳定性分析

为系统性地给出数字图像不变矩一般性构造方法及对不变矩稳定性进行分析,通过采用复数矩作为描述数字图像识别特征量的方法,研究了复数不变矩所具有不变性的约束条件及其与几何不变矩间的关系,推导出了复数不变矩构造定理,并以在工程应用中的低阶复数不变矩为例对复数不变矩的稳定性进行了分析。研究结果表明:采用复数不变矩构造数字图像特征量具有很好普适性和稳定性,对于图像目标识别特征的描述有较好的效果。     

新型PBL键外包钢-混凝土组合梁抗弯承载力简化计算

基于理论分析,建立了新型PBL键外包钢-混凝土组合梁抗弯承载力计算的基本假定和计算模型,推导出组合梁抗弯承载力的简化计算公式,并采用有限元分析软件ANSYS14.5对组合梁进行了非线性有限元分析.对比分析表明:新型PBL键外包钢混凝土组合梁抗弯承载力的试验值、简化计算值和模拟分析值吻合较好.     

Choosing arrival process models for service systems: Tests of a nonhomogeneous Poisson process

Service systems such as call centers and hospital emergency rooms typically have strongly time‐varying arrival rates. Thus, a nonhomogeneous Poisson process (NHPP) is a natural model for the arrival process in a queueing model for performance analysis. Nevertheless, it is important to perform statistical tests with service system data to confirm that an NHPP is actually appropriate, as emphasized by Brown et al. [8]. They suggested a specific statistical test based on the Kolmogorov–Smirnov (KS) statistic after exploiting the conditional‐uniform (CU) property to transform the NHPP into a sequence of i.i.d. random variables uniformly distributed on [0,1] and then performing a logarithmic transformation of the data. We investigate why it is important to perform the final data transformation and consider what form it should take. We conduct extensive simulation experiments to study the power of these alternative statistical tests. We conclude that the general approach of Brown et al. [8] is excellent, but that an alternative data transformation proposed by Lewis [22], drawing upon Durbin [10], produces a test of an NHPP test with consistently greater power. We also conclude that the KS test after the CU transformation, without any additional data transformation, tends to be best to test against alternative hypotheses that primarily differ from an NHPP only through stochastic and time dependence. © 2014 Wiley Periodicals, Inc. Naval Research Logistics 61: 66–90, 2014     

正反向量子斯特林循环有限时间热力学性能界限和优化准则

研究了正反向量子斯特林循环的最优性能.在经典极限下,导出了循环的有限时间热力学性能界限和优化准则.得到了斯特林热机、制冷机和热泵特性参数之间的优化关系.     

临近空间大型柔性充气囊体结构特性分析

以临近空间平流层飞艇柔性充气囊体为研究对象,根据充气结构设计理论对充气囊体结构的最小压差和应力进行计算,建立平流层飞艇充气囊体结构有限元模型。在模型验证的基础上,采用非线性有限元方法对平流层飞艇充气囊体结构特性进行仿真分析,得到了囊体结构在不同压差和吊舱载荷作用下应力和变形分布及变化规律,并分析了结构加强配置对囊体应力和变形的影响,为平流层飞艇结构设计提供技术支撑和参考依据。     

多旋翼无人机减振分析与实验

针对多旋翼无人机机身系统振动过大导致飞行状态不稳的问题,基于有限元仿真技术与实验方法,进行了减振分析。通过频率分析,确定系统振动过大的原因为固有频率与激励频率耦合导致的共振现象,且共振频点的模态振型包含一阶挥舞、一阶摆振和二阶摆振振型。提出了优化机身壳体截面形状的设计方案,在不增加额外质量的情况下,将一阶挥舞、一阶摆振和二阶摆振振型对应的频点分别提高37.23%、22.47%和18.43%,有效规避了机身共振现象。仿真实验证明,提出的有限元仿真与实验结合的减振分析思〖BHDWG8,WK10YQ,DK1*2,WK1*2D〗〖XCMWL.TIF;%129%129〗听语音 聊科研与作者互动 路及优化设计方法,可为旋翼无人机减振设计提供参考依据。