影响电流变效应的因素

根据国内外研究的现状 ,分析综述了影响电流变效应 (ER效应 )的因素     

载流管道在基础振动下的振动控制

根据舰船管道的实际情况 ,在载流管系的动态响应分析中引入基础振动的影响 .计算分析了舰船管道系统在流体激励、外部干扰力和基础振动情况下的动态响应 .研究了如何减小基础振动对管路系统振动的影响 ,通过计算分析 ,提出了比较有效的减振措施 .     

电流变液的光学特性及其应用研究

电流变液是一种极具发展前景的新型智能材料．文中介绍了目前国内外电流变液的光学特性研究动态,分析了其机理,并展望了应用前景．力求能准确反映电流变液光学特性研究的发展现状,旨在促进电流变液在光学领域的研究．     

石墨烯作为水基半合成切削液添加剂的硬质合金-钢材料摩擦学特性分析

改善加工过程润滑条件是延缓刀具磨损的重要途径。将石墨烯作为3034水基半合成切削液的添加剂,研究石墨烯悬浮切削液的硬质合金-钢材料摩擦学性能,研究对象是由硬质合金YG8制备的金属球和由45#钢制备的圆盘形试件;采用球-盘摩擦副接触方式在摩擦磨损试验机上进行试验,测定了质量分数为0. 1%~0. 9%的石墨烯悬浮切削液的平均摩擦特性和摩擦系数;采用激光共聚焦显微镜对磨痕轮廓进行提取,并得出磨损定量评价指数,并用扫描电镜和拉曼光谱仪对磨痕进行磨损机理分析;进行切削实验来分析石墨烯悬浮切削液对切削性能指标的改善情况。实验分析结果表明:石墨烯悬浮切削液能明显改善硬质合金-45#钢之间的润滑条件,摩擦系数和磨损率显著下降,采用不同质量分数石墨烯悬浮切削液的平均摩擦系数较原半合成切削液下降12. 9%~57. 3%,磨损率下降33. 82%,同时切削合力较原半合成切削液下降18. 58%,加工后工件表面粗糙度下降7. 5%。     

热压多晶氟化镁的磁流变抛光研究

热压多晶氟化镁是一种被广泛应用的红外光学材料.磁流变抛光因其抛光效率高、磨头无磨损、可实现确定性加工等优点而日益成为倍受瞩目的超精密光整加工技术.在利用传统抛光方法得到热压多晶氟化镁的抛光特性的基础上配制了适用于该材料的磁流变抛光液.通过抛光实验证明,与传统抛光方法相比,采用磁流变抛光方法对热压多晶氟化镁进行抛光,可以得到较好抛光表面质量,并且抛光的效率也大大提高.     

Deformation,fragmentation and acceleration of a controlled fragmentation charge casing

Two different finite element software, LS-DYNA and Impetus, have been evaluated to test their ability to predict the deformation, fragmentation and acceleration of a controlled fragmentation charge casing. The general-purpose program LS-DYNA was used with a multi-material ALE formulation and a mass-preserving erosion criterion coupled to a Johnson-Cook fracture criterion. In the Impetus simulations, a third order Lagrangian element formulation was used for the casing and a node-splitting element erosion treatment coupled to a Cockcroft-Latham failure criterion was used to describe casing fracture. The high-explosive gases were described by a discrete particle formalism.In order to acquire data to validate our computational tools and constitutive models, a series of experiments have been performed using a laboratory charge with an internal grooved casing. In the test series, the charge geometry was fixed except that the groove depth were varied from very shallow to very deep resulting in different deformation patterns, fracture modes and terminal velocities. Various diagnostic tools captured the different stages of the expansion and fragmentation of the casing. A high-speed framing camera depicted the deformation pattern before fragmentation and was used to determine the moment when the casing failed. Three different complementary techniques were used to follow the acceleration of the fragments; a Photon Doppler velocimetry to determine the initial acceleration of the casing, double exposed radiographs to estimate the fragment velocity after break-up and a high-speed video to determine the terminal velocity of the fragment after leaving the fireball. In addition, the fragments were soft recovered in a set of sawdust pit tests and their final shape and weight were measured. A SEM was used to characterise the fracture surfaces and to determine the modus of fracture (tensile or shear failure).Comparisons to experiments show that both software can predict the change in deformation behaviour when the groove depth increases, from tangential necking for shallow grooves to radial punching for deep groves. Both software could also reasonable well predict the acceleration of the fragments, though both overestimates the terminal velocity for the charge with the deepest grooves.     

低雷诺数壁面约束流动皮托管测速误差分析与校正

针对低雷诺数壁面约束流动中皮托管测速误差产生的两大主要影响因素——剪切速度与近壁效应,采用计算流体力学技术分别对其进行数值模拟,并研究各自引起的误差变化规律。数值模拟结果表明:虽然剪切速度引起的流线偏移规律与相关文献结论基本一致,但是数值结果预测的流线偏移量并不是一个渐近函数;近壁距离在5倍管径即出现较为明显的测量误差,并且发现近壁距离在1倍管径处出现误差的非单调性变化。最后通过将数值模拟结果与现有的修正方法进行对比,提出了更为合理的修正方程。     

自行火炮液压系统油液内泄漏量数学模型研究

通过对自行火炮油液泄漏故障形式和原因分析,综合考虑系统的工作压力、温度和混入空气量影响,建立了自行火炮油液泄漏量的数学模型。该模型指出了自行火炮液压系统内泄漏量主要取决于系统的温度、压力、液压油的动力粘度、油液的体积模量和热膨胀系数,揭示了泄漏量随工作参数峰值变化的规律,可为自行火炮的油液泄漏检测与定位提供参考。     

垂直刚性面边界条件下水下爆炸气泡运动的理论研究

为研究垂直边界面对水下爆炸气泡脉动的影响,根据势流理论建立了垂直边界面条件下水下爆炸气泡运动的理论模型,编制计算程序进行求解。对水下爆炸气泡脉动运动的特点、流场的速度及压力的分布、气泡引起的载荷形式进行了分析,结果表明,此模型能够反映水下爆炸气泡和周围流体介质的运动规律,并能进行定量的计算。     

舰船静置爆炸气泡时总纵强度计算方法研究

新型"大气泡能"概念武器在水下爆炸能产生大气泡,对船体总纵强度造成很大影响,有可能使舰体发生纵向折断或倾覆。为研究这种作用,建立了舰船静置爆炸气泡时总纵弯曲强度的理论计算方法。采用静置爆炸气泡的假设,将气泡产生的浮力损失和压力差转化为等效载荷,计算气泡作用后船体的总纵弯矩和剪力并进行强度校核。以某舰艇为例进行计算,结果表明,爆炸气泡作用下船体的剪力和弯矩比静浮状态增大很多,船体发生纵向折断破坏的危险性也随之增大。