地下工程非爆破开挖机械破碎法机理及应用

针对非爆破法开挖工序中的关键问题——导向孔布置方案优化,结合非爆破施工实作流程及工艺,利用波动理论探索了破碎锤冲击破岩机理。破碎锤通过钎杆冲击导向孔产生孔间贯穿裂缝进而破岩掘进,破碎锤冲击破岩的过程是岩石被拉坏的过程,孔间岩石中的切向应力是提高破岩效率的关键因素。基于岩石断裂力学理论,总结得出导向孔间裂缝产生、扩展、贯通的判据,并依托实际工程进行验算,理论计算结果与现场试验结果吻合良好,同时提出了导向孔布置优化方案的改进建议。     

陶瓷/薄钢板复合结构靶板抗高速侵彻性能研究

为探讨陶瓷/薄钢板复合结构靶板(ceramic/thin steel targets,CS靶板)的抗高速侵彻机理,通过弹道试验,分析了3 mm厚SiC陶瓷层和0.6 mm厚钢板层的CS靶板的破坏模式和抗侵彻性能,并与面密度基本相同的纯钢板进行了比较。在此基础上,基于能量守恒原理,建立了CS靶板抗高速侵彻的理论预测模型,并与试验结果进行了对比。结果表明,CS靶板中前陶瓷层的存在,使得后钢板层的破坏模式由剪切冲塞转变为花瓣开裂,大大提升了后钢板层的抗侵彻吸能效率,从而使得CS靶板的整体抗侵彻性能高于等面密度的纯钢板,CS靶板的整体抗侵彻效率较等面密度纯钢板提升15%以上;弹体穿透CS靶板后的剩余速度理论预测值与试验结果吻合较好,相对误差均在5%以内,验证了理论模型的合理性和有效性。     

面向计算流体力学的图形处理器资源管理

针对求解计算流体力学过程中图形处理器资源利用率低的问题,提出面向计算流体力学的图形处理器资源优化管理方案。基于计算流体力学的算法特性和同时运行任务的执行特点,设计合理的调度方案。通过动态改变不同任务的启动规模和启动时间,在减少资源竞争的同时提高图形处理器资源的有效使用。实验结果表明:本文提出的资源管理方案相比基线方法在不同任务规模下的平均加速比达到 1.64,对图形处理器的硬件资源使用也有了显著的提升。     

Resistance of grid steel-tube-confined concrete targets against projectile impact: Experimental investigation and analytical engineering model

Steel-tube-confined concrete (STCC) targets are provided with excellent anti-penetration performance over semi-infinite concrete (SIC) targets since the steel tube imposes passive restraint on the in-filled concrete during the penetration process. Grid STCC system with square steel tubes is a potential solution to protective structures. In this paper, experiments of 9-cell grid STCC targets penetrated by 12.7 mm Armor Piercing Projectile (APP) were performed. The influence of side length and thickness of steel tube, steel ratio and impact velocity on anti-penetration performance were taken into account. Additionally, single-cell square STCC targets were also designed and tested for comparison with the 9-cell grid STCC targets. Damage modes and parameters of the tested targets were measured and discussed. Moreover, the stiffness of radial confinement of grid STCC targets is achieved according to the elastic solution of infinite cylindrical shell in Winkler medium. Furthermore, the penetration resistance and depth of penetration (DOP) for grid STCC targets are obtained on the basis of the dynamic finite spherical cavity-expansion (FSCE) models including radial confinement effect. It is shown that the 9-cell grid STCC targets with optimal dimension match of thickness and side length of steel tube can reduce the DOP by about 17 % and 23 % in comparison with the SIC targets and single-cell square STCC targets, respectively, due to both the confinement of square steel tube to concrete in the impacted cell and the additional confinement of the surrounding cells to the impacted cell; the penetration resistance and DOP of the grid and cellular STCC targets with similar steel ratio is close, and thus the grid STCC targets with simpler manufacturing process and excellent in-plane expandability are preferred in engineering practice; moreover, the predicted results of DOP model based on the FSCE models agree well with the tested results with the maximum disparity less than 12 % and the proposed model is more applicable to the grid and cellular STCC targets with high radial confinement.     

爆轰波斜冲击作用下破片飞散特性研究

为研究非对称结构战斗部的破片飞散特性,利用斜激波理论对爆轰波作用于壳体表面的过程进行研究,并利用自由面速度倍增定律对波在自由面反射后质点速度的计算进行简化,得到了破片飞散角的计算模型。利用D型战斗部试验数据对计算模型进行验证,结果表明,斜激波理论计算得到的破片飞散与试验结果吻合很好;当入射角较小时,壳体飞散角与入射角成线性关系。     

分布参数管道的一种改进的小分段数有限元模型

在分段数为１和２时，现有有限元模型的一阶谐振频率比一维分布参数模型的一阶谐振频率低许多，因而其适用的频率范围较低，计算精度较差。本文提出了一种改进的小分段数有限元模型，通过修正流体管道的并联导纳使分段数为１和２时的有限元模型的一阶谐振频率与一维分布参数模型一致，从而提高了其使用的频率范围和计算精度。利用单根管道阀门关闭的水击问题的仿真计算对改进模型的效果进行了验证。在分段数为２时，原有的有限元模型的计算结果与分布参数模型的计算结果相差较大，而改进后的模型的计算结果与分布参数模型的计算结果基本一致。     

复合材料的弹性常数与损伤的直接测试

本文将复合材料细观力学和复合材料微裂纹损伤理论与直接测试方法结合起来,在一次加载条件下直接测得复合材料结构件的弹性常数和损伤变量随外载的变化规律,从而可避免直接测试方法的多次加载的困难。由碳纤维／环氧复合材料圆筒壳的轴压实验的直接测试所得结果比较合理,表明该方法是合理可靠的,特别是在加载条件下直接测得复合材料结构件的损伤发展规律之后,可将复合材料微裂纹损伤理论直接用于工程结构件的动态损伤监测。     

浅谈加强干部队伍机制建设

干部队伍建设是部队建设的根本。要抓好这项根本性的工作,就要建立行之有效的干部队伍机制建设,同时,要突出重点,落实措施,确保干部队伍机制建设落到实处。     

水下声源引起的水表面横向微波的理论研究

利用水下声信号在水表面引起的水表面横向微波振幅很小的条件,将普遍的流体力学方程线性化,推导出在水下点声源的激励下,水表面产生的二维横向微波色散关系以及波的传播形式。结果表明,二维水表面的横向微波具有和一维情况类似的结果,即具有波长短、传播速度小的特点,因而可以对入射到表面的激光束进行调制,为水下声信号检测奠定了理论基础。     

Simulation on the dynamic stability derivatives of battle-structure-damaged aircrafts

Accurately evaluating the aerodynamic performance of a battle-structure-damaged aircraft is essential to enable the pilot to optimize the flight control strategy. Based on CFD and rigid dynamic mesh techniques, a numerical method is developed to calculate the longitudinal and longitudinal-lateral coupling forces and moments with small amplitude sinusoidal pitch oscillation, and the corresponding dynamic de-rivatives of two fragment-structure-damaged and two continuous-rod-damaged models modified from the SACCON UAV. The results indicate that, at the reference point set in this paper, additional positive damping is generated in fragment-damaged configurations; thus, the absolute values of the negative pitch dynamic derivative increase. The missing wingtip induces negative pitch damping on the aircraft and decreases the value of the pitch dynamic derivative. The missing middle wing causes a noticeable increase in the absolute value of the pitch dynamic derivative;the missing parts on the right wing cause the aircraft to roll to the right side in the dynamic process, and the pitch-roll coupling cross dynamic derivatives are positive. Moreover, the values of these derivatives increase as the damaged area on the right wing increases, and an optimal case with the smallest cross dynamic derivative can be found to help improve the survivability of damaged aircraft.