HLA联邦的桥接扩展和影响时空一致性的实例分析

随着计算机技术和仿真应用的发展 ,越来越需要组建大规模分布仿真系统 ,HLA框架的定义和应用为此提供了很好的契机。使用桥接技术把不同的联邦连接起来是构建大规模联邦的有效方法 ,其中桥接邦元更适合于不同RTI的异地连接。桥接HLA联邦会带来影响系统时空一致性和性能的新问题 ,时间推进和所有权转移是两个有代表性的例子 ,需要重点解决     

大气层内复合控制拦截弹切换时间的探讨

大气层内拦截弹采用空气动力与燃气动力的复合控制方式是当今世界防空导弹的发展方向之一。复合控制技术的分析研究是当前急需解决的重要问题。在考虑目标机动加速度大小、目标机动时刻以及目标角闪烁的条件下 ,确定了拦截弹的控制方式由空气动力切换到复合控制时的切换时间。     

DIS系统中实时通讯技术的研究

针对DIS系统实时通讯的要求 ,以UDP通讯协议为基础 ,结合采用多线程技术 ,给出了一种实时通讯方法 .经模拟试验表明该方法在WindowsNT环境下是有效的 .     

线阵CCD在弹丸飞行姿态测量中的应用

提出应用线阵CCD技术测量飞行弹丸攻角 ,建立了测量飞行弹丸攻角的计算方法。实际测量结果表明应用单个线阵CCD可以测量飞行弹丸的一个攻角分量。对测量误差进行了分析 ,发现线阵CCD的采样频率对测量误差的影响较大     

Estimating failure time distribution and its parameters based on intermediate data from a Wiener degradation model

Instead of measuring a Wiener degradation or performance process at predetermined time points to track degradation or performance of a product for estimating its lifetime, we propose to obtain the first‐passage times of the process over certain nonfailure thresholds. Based on only these intermediate data, we obtain the uniformly minimum variance unbiased estimator and uniformly most accurate confidence interval for the mean lifetime. For estimating the lifetime distribution function, we propose a modified maximum likelihood estimator and a new estimator and prove that, by increasing the sample size of the intermediate data, these estimators and the above‐mentioned estimator of the mean lifetime can achieve the same levels of accuracy as the estimators assuming one has failure times. Thus, our method of using only intermediate data is useful for highly reliable products when their failure times are difficult to obtain. Furthermore, we show that the proposed new estimator of the lifetime distribution function is more accurate than the standard and modified maximum likelihood estimators. We also obtain approximate confidence intervals for the lifetime distribution function and its percentiles. Finally, we use light‐emitting diodes as an example to illustrate our method and demonstrate how to validate the Wiener assumption during the testing. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

The building evacuation problem with shared information

In this article, the Building Evacuation Problem with Shared Information (BEPSI) is formulated as a mixed integer linear program, where the objective is to determine the set of routes along which to send evacuees (supply) from multiple locations throughout a building (sources) to the exits (sinks) such that the total time until all evacuees reach the exits is minimized. The formulation explicitly incorporates the constraints of shared information in providing online instructions to evacuees, ensuring that evacuees departing from an intermediate or source location at a mutual point in time receive common instructions. Arc travel time and capacity, as well as supply at the nodes, are permitted to vary with time and capacity is assumed to be recaptured over time. The BEPSI is shown to be NP‐hard. An exact technique based on Benders decomposition is proposed for its solution. Computational results from numerical experiments on a real‐world network representing a four‐story building are given. Results of experiments employing Benders cuts generated in solving a given problem instance as initial cuts in addressing an updated problem instance are also provided. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

一种改进方位向非线性CS大斜视角SAR成像算法

大斜视角SAR成像时存在严重的距离走动现象,慢时域的距离走动校正在解决这一问题同时导致了聚焦深度问题.分析了二维频域解耦合后残余相位误差以及时域走动校正后的多普勒调频率误差,提出一种改进的方位向非线性CS算法,校正了三次以上距离迁徙带来的相位误差,同时采用改进非线性CS扰动方程补偿了随方位偏移量线性变化的调频率误差.仿真结果表明,改进算法的大斜视角大场景成像性能优于传统的高分辨大斜视角成像算法.     

铝导线短路熔珠对固体可燃物引燃能力实验研究

在模拟试验平台上进行了铝导线短路熔珠引燃棉布、聚氨酯泡沫塑料和纸张的试验,得到了不同材料的临界加栽电压值和引燃规律。初步分析了加栽电压与短路熔珠粒径及引燃能力的关系。结果表明,随着短路电压增大,导线熔珠的粒径逐渐增大,熔珠对固体材料的引燃能力逐渐增强,氧指数越低、表面粗糙、易蓄热的材料越容易被点燃。棉布、聚氨酯泡沫塑料和纸屑被引燃的短路临界电压分别为50V、35V和45V。     

第Ⅳ类时滞捕食系统的Hopf分支

研究了具有第Ⅳ类功能性反应的两种群时滞捕食系统正平衡点的稳定性,讨论了该系统的Hopf分支现象,并进行了数值模拟。     

电子时间引信检测仿真试验研究

为提高电子时间引信的检测能力,介绍了电子时间引信检测仿真试验,分析了仿真试验的原理,给出了检测仿真试验的试验方法。经实际检测表明,该检测仿真试验能够安全可靠地完成电子时间引信的日常检测任务。