面向突防效能的超声速巡航导弹总体设计技术初步研究

防御系统技术的不断发展,对超声速巡航导弹设计提出了新的需求.针对以“性能”为核心的设计不能满足超声速巡航导弹设计新需求的问题,初步探讨了面向突防效能的超声速巡航导弹总体设计技术.分析了国内外导弹武器设计技术的发展,指出设计技术向着以“效能为核心”的设计方向发展;提出了面向效能的设计理念,分析指出面向效能的设计是以追求满意设计为目标的优化设计;在新的设计理念指导下提出了面向突防效能设计的技术框架,主要说明了面向突防效能的超声速巡航导弹设计框架、效能基础、技术基础、基本模式以及几项关键技术等.     

Partial penetration of annular grooved projectiles impacting ductile metal targets

Changing and optimizing the projectile nose shape is an important way to achieve specific ballistic performance. One special ballistic performance is the embedding effect, which can achieve a delayed high-explosive reaction on the target surface. This embedding effect includes a rebound phase that is significantly different from the traditional penetration process. To better study embedment behavior, this study proposed a novel nose shape called an annular grooved projectile and defined its interaction process with the ductile metal plate as partial penetration. Specifically, we conducted a series of low-velocity-ballistic tests in which these steel projectiles were used to strike 16-mm-thick target plates made with 2024-O aluminum alloy. We observed the dynamic evolution characteristics of this aluminum alloy near the impact craters and analyzed these characteristics by corresponding cross-sectional views and numerical simulations. The results indicated that the penetration resistance had a brief decrease that was influenced by its groove structure, but then it increased significantly-that is, the fluctuation of penetration resistance was affected by the irregular nose shape. Moreover, we visualized the distribution of the material in the groove and its inflow process through the rheology lines in microscopic tests and the highlighted mesh lines in simulations. The combination of these phenomena revealed the embed-ment mechanism of the annular grooved projectile and optimized the design of the groove shape to achieve a more firm embedment performance. The embedment was achieved primarily by the target material filled in the groove structure. Therefore, preventing the shear failure that occurred on the filling material was key to achieving this embedding effect.     

不同截面形状复合长杆弹对陶瓷复合靶板侵彻研究

采用数值模拟技术研究了由3种不同截面形状的钨芯外包覆一层钢,形成的钢包覆层复合长杆弹在入射速度为1200m/s～1700m/s时对陶瓷/金属复合靶板的侵彻过程。结果表明:对于同一入射速度、相同弹体长度、同种材料的弹芯和包覆层以及靶板材料而言,等面积的六边形截面钨芯复合长杆弹的侵彻深度明显大于圆形及方形截面,方形及六边形截面与和它们等外接圆形成的圆形截面复合长杆弹侵彻深度没有明显差别,本研究认为这是与不同截面钨芯的外接圆直径直接相关。六边形截面长杆弹侵彻过程中的自锐化现象是其侵彻深度明显大于其它两种弹体的主要原因。     

对机动突防反舰导弹的防御

建立了舰空导弹反导拦截模型和反舰导弹“蛇行机动”突防弹道模型,通过攻防对抗仿真的方法研究了舰空导弹对末端机动突防反舰导弹的防御问题,提出了对舰空导弹未来发展的建议.     

中小型舰艇设置轻型复合装甲的作用及爆炸破片的杀伤威力计算

简要论述了先进防弹复合材料在舰艇装甲防护中的应用 ,针对中小型舰艇设置轻型复合装甲的目的 ,进一步论证分析了舰艇轻型复合装甲的防御目标和防护部位 ,并结合典型防御目标———导弹爆炸破片的杀伤威力进行了计算分析     

导弹飞行试验破片速度测定方法及其误差修正模型研究

破片速度的测量是导弹实弹飞行试验中一项难度较高的课题,准确的测量结果对于科学评价武器毁伤效能等技术指标具有十分重要的意义.立足国内技术现状,综述了导弹破片速度测量评定的一般方法,分析了各方法的基本原理,针对每种方法探讨了测量评定破片速度所存在的误差源.结合导弹实弹飞行试验特点及靶场试验实际情况,重点对采用靶网法测量单枚破片速度的误差及误差源进行了分析,给出了误差修正模型及提高测速精度的技术措施,并指出了靶场现有破片测速方案的不足和改进方向.论文成果在靶场实践中得到了部分应用.     

弹体处理在提高战术弹道导弹弹头突防能力中的应用

针对美国战区导弹防御 (TMD)系统的特点 ,提出了提高中程战术弹道导弹弹头突防能力的弹体处理 (弹体分解 )方案。从弹头目标群的雷达辐射、红外辐射、减速等特性对弹体分解方案进行了分析和初步论证。最后演示了利用多目标突防挫败“战区高空区域防御”(THAAD)系统的过程