析哈龙灭火系统替代技术现状

主要介绍哈龙灭火系统替代技术的现状 ,分析气体灭火系统、非气体灭火系统及传统替代技术的主要特点与现存缺陷 ,总结研究方向。     

关于潜艇装备劳兰C导航仪技术问题的研究

本文提出了一种改善潜艇现有天线接收性能的方法,从而解决了在潜艇上安装使用劳兰C导航仪的关键技术问题。     

双重改性空心微珠的制备及表征

首先采用液相沉积碳化法对空心微珠表面进行无机改性,制备出表面无机改性空心微珠;再对无机改性空心微珠进行有机改性,制备出了双重改性空心微珠。采用扫描电子显微镜、X射线衍射、红外光谱、热失重以及分光光度计法对双重改性空心微珠的制备进行了表征。结果表明：采用双重改性方法制备的表面改性空心微珠微观形貌仍为球状,微珠由灰黑色变为淡黄色;微珠表面的CaCO3属方解石相六方晶系;双重改性空心微珠中CaCO3质量分数约为7%,有机改性剂质量分数约为17%。双重改性空心微珠较之单纯有机改性空心微珠在500SN基础油中的分散稳定性能明显提高。     

具有在线测量功能的三工位紧塞具压入机设计研究

分析目前使用的药筒紧塞具压入设备的缺点和不足,研究在线测量药筒实际装药高度的方法,提出在线测量药筒实际装药高度,同时根据装药高度控制紧塞具实际压入深度的设计思想,设计了一种具有在线测量功能的采用并行工作方式的三工位药筒紧塞具压入设备。该设备具有自动化程度高和能够精确控制紧塞具压入深度等特点。     

用于闭式循环柴油机不依赖空气推进装置的吸收器尺寸估算模型研究

根据闭式循环柴油机推进装置（ＣＣＤＡＩＰ）的废气处理要求,研究提出了旋转式二氧化碳吸收器的填料内径、外径、轴向高度的估算数学模型,并对用水吸收二氧化碳的吸收器填料设计尺寸进行了操作安全性校核．     

Driving force coordinated control of an 8 ×8 in-wheel motor drive vehicle with tire-road friction coefficient identification

Because of the complexities of tire-road interaction,the wheels of a multi-wheel distributed electric drive vehicle can easily slip under certain working conditions.As wheel slip affects the dynamic per-formance and stability of the vehicle,it is crucial to control it and coordinate the driving force.With this aim,this paper presents a driving force coordination control strategy with road identification for eight-wheeled electric vehicles equipped with an in-wheel motor for each wheel.In the proposed control strategy,the road identification module estimates tire-road forces using an unscented Kalman filter al-gorithm and recognizes the road adhesion coefficient by employing the recursive least-square method.According to road identification,the optimal slip ratio under the current driving condition is obtained,and a controller based on sliding mode control with a conditional integrator uses this value for accel-eration slip regulation.The anti-slip controller obtains the adjusting torque,which is integrated with the driver-command-based feedforward control torque to implement driving force coordination control.The results of hardware-in-loop simulation show that this control strategy can accurately estimate tire-road forces as well as the friction coefficient,and thus,can effectively fulfill the purpose of driving force coordinated control under different driving conditions.     

浅析炮车比

本文以坦克发射时车体的角振幅和乘员所受加速度不超过一定值为基础,推导了炮车比极限值的理论公式;并对影响炮车比极值的因素进行了分析,最后,以59式坦克为例得出炮车比不超过1.71,该结论具有普遍意义.     

What you should know about simulation and derivatives

Derivatives (or gradients) are important for both sensitivity analysis and optimization, and in simulation models, these can often be estimated efficiently using various methods other than brute‐force finite differences. This article briefly summarizes the main approaches and discusses areas in which the approaches can most fruitfully be applied: queueing, inventory, and finance. In finance, the focus is on derivatives of another sort. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

第二类曲面积分计算方法新探

首先对有向曲面∑1:z=z(x,y),(x,y)∈Dxy上的第二类曲面积分的计算进行了探讨,主要根据第二类曲面积分与第一类曲面积分的关系,通过计算有向曲面的法向量, 把被积函数转化为两向量的点积。然后利用曲面面积元素与坐标面上的面积元素的关系, 再转化为二重积分,简化了第二类曲面积分的计算。最后对其它形式的光滑有向曲面也进行了类似研究,都可直接转化为二重积分。     

On lifetimes in random environments

For a component operating in random environment, whose hazard rate is assumed to be the realization of a suitable increasing stochastic process, conditions are found such that its lifetime is increasing in likelihood ratio (ILR). For the lifetimes of two components of the same kind some comparisons based on partial stochastic orders are presented. Some applications to the case of repairable components are finally provided. © 1998 John Wiley & Sons, Inc. Naval Research Logistics 45: 365–375, 1998