Numerical study on the case effect of a bomb air explosion

When considering the bomb explosion damage effect, the air shock wave and high-speed fragments of the bomb case are two major threats. In experiments, the air shock wave was studied by the bare ex-plosives superseding the real cased bomb; in contrast, the bomb case influence was ignored to reduce risk. The air explosion simulations of the MK84 warhead with and without the case were conducted. The numerical simulation results showed that the bomb case significantly influenced the shock wave generated by the bomb: the spatial distribution of shock wave in the near field changed, and the peak value of shock wave was reduced. Breakage of the case and kinetic energy of the fragmentation consumed 3 and 38% of the explosion energy, respectively. The increasing factors of the peak over-pressure induced by the bare explosive on the ground and in the air were 1.43-3.04 and 1.37-1.57, respectively. Four typical stages of case breakage were defined. The mass distribution of the fragments follows the Mott distribution. The initial velocity distribution of the fragments agreed well with the Gurney equation.     

Explosion temperature mapping of emulsion explosives containing TiH2 powders with the two-color pyrometer technique

In the study, the two-color pyrometer technique was used to measure the transient temperature field of emulsion explosives with different contents of TiH₂ powders. The experimental results showed that the introduction of TiH₂ powders could significantly increase the explosion temperature and fireball duration of emulsion explosive. When emulsion explosives were ignited, the average explosion temperature of pure emulsion explosive continuously decreased while emulsion explosives added with TiH₂ powders increased at first and then decreased. When the content of TiH₂ powders was 6 mass%, the explosion average temperature reached its maximum value of 3095 K, increasing by 43.7% as compared with that of pure emulsion explosive. In addition, the results of air blast experiment and explosion heat test showed that the variation trends of shock wave parameters, explosion heat and theoretical explosion temperature of emulsion explosives with different contents of TiH₂ powders were basically consistent with that of explosion temperature measured by the two-color pyrometer technique. In conclusion, the two-color pyrometer technique would be conducive to the formula design of emulsion explosive by understanding the explosion temperature characteristics.     

预制缺陷柱壳结构的等效裂纹分析方法

针对传统有限元法在分析预制缺陷柱壳时出现的应力/应变计算精度不足、无法有效指导工程实践的问题,提出了一种具有高冗余度的等效裂纹分析方法。将预制缺陷视作典型裂纹,基于奇异裂纹元法对其进行裂纹稳定性分析,并根据稳定性分析结果来评估预制缺陷柱壳的结构完整性。通过该方法得到的分析结果具有比常规有限元分析更高的可靠性,对于导弹线式爆炸分离装置等工作环境恶劣、风险系数较高的预制缺陷柱壳结构而言,该方法有助于提升其设计的安全裕度,具有一定的工程实用性。     

烟花爆竹及民用爆炸物品建筑工程消防审核验收探讨

结合烟花爆竹、民用爆炸物品的生产、储存火灾危险性,探讨了公安机关消防机构如何对烟花爆竹、民用爆炸物品生产、储存场所进行消防设计审核验收,以起到加强烟花爆竹、民用爆炸物品生产、储存建筑消防安全的目的。     

纵火战斗部爆炸分散仿真研究

在试验的基础上,从炸药对纵火炬的驱动和纵火炬在空中飞散两个方面,对其在战斗部静爆和动态飞行时的爆炸分散进行了仿真研究,研究结果对纵火弹的具体设计具有重要的参考价值。     

爆电换能的理论分析

考虑了铁电介质的介电松弛和电导率松弛,计及冲击波阵面在样品中传播过程的影响,改进了垂直模式冲击波加载铁电陶瓷电响应的理论,且理论分析与实验结果基本一致。     

Fragment spatial distribution of prismatic casing under internal explosive loading

Non-cylindrical casings filled with explosives have undergone rapid development in warhead design and explosion control. The fragment spatial distribution of prismatic casings is more complex than that of traditional cylindrical casings. In this study, numerical and experimental investigations into the fragment spatial distribution of a prismatic casing were conducted. A new numerical method, which adds the Lagrangian marker points to the Eulerian grid, was proposed to track the multi-material interfaces and material dynamic fractures. Physical quantity mappings between the Lagrangian marker points and Eulerian grid were achieved by their topological relationship. Thereafter, the fragment spatial distributions of the prismatic casing with different fragment sizes, fragment shapes, and casing geometries were obtained using the numerical method. Moreover, fragment spatial distribution experiments were conducted on the prismatic casing with different fragment sizes and shapes, and the experimental data were compared with the numerical results. The effects of the fragment and casing geometry on the fragment spatial distributions were determined by analyzing the numerical results and experimental data. Finally, a formula including the casing geometry parameters was fitted to predict the fragment spatial distribution of the prismatic casing under internal explosive loading.     

采用扩展有限元法的线式爆炸分离装置裂纹扩展分析

为了提高线式爆炸分离装置的安全性,本研究基于扩展有限元法,通过创建二维和三维动态裂纹扩展模型,探索了线式爆炸分离装置在爆轰波作用过程中的动态裂纹扩展和止裂机理。研究表明,分离壳体的裂纹扩展路径独立于裂纹初始角度;不考虑载荷时序时,二维和三维动态裂纹扩展的主方向分别沿着分离壳体的径向和环向;考虑载荷时序时,受不同区域应力波的联合作用,三维裂纹沿环向扩展的同时会沿着轴向扩展,但裂纹的扩展均不会影响到止裂槽以外的结构。所提方法和相应结论可为线式爆炸分离装置设计提供参考。     

新型导爆索式爆炸零门设计及试验

为了增强爆炸零门在应用中的稳定性,降低对沟槽装药装填工艺的要求,以间隙零门为研究对象,提出了以导爆索代替部分沟槽装药结构的方法。对具有不同尺寸参数的导爆索、沟槽装药以及零门间隙进行组合试验,以期通过试验得到装填工艺简单且控制通道对信号通道作用稳定的装填物质组合。研究结果表明,通过对由导爆索构成的爆炸零门进行合理的参数配置,能够实现在提升零门装置稳定性的同时又保证其可靠性。     

不同网栅结构对MEFP成型影响的对比分析

为了研究不同形状网栅结构对形成的MEFP破片的影响,利用LS-DYNA动力有限元程序,采用Lagrangian方法,分别对十字形网栅切割式MEFP战斗部、星形线形网栅切割式MEFP战斗部、中心圆环形网栅切割式MEFP战斗部、井字形网栅切割式MEFP战斗部成型过程进行了数值模拟研究,并对影响各自破片成型及发散角的因素进行了分析研究。通过对不同方案网栅切割式MEFP速度及散布面积对比分析,结果表明:采用井字形网栅产生的破片集聚性优于十字形、星形线形和中心圆环形结构方案。