RCS特性辅助的CMIMO雷达功率资源分配方法

针对集中式多输入多输出(collocated multiple-input multiple-output, CMIMO)雷达在实际探测过程中,未有效结合目标雷达散射截面(radar cross section, RCS)高动态变化特性导致雷达跟踪精度不高甚至失跟的问题,提出一种基于目标RCS高动态特性的CMIMO雷达功率资源自适应分配方法。考虑到目标RCS特征的角度敏感性,利用目标运动状态的可预测性动态获取实际观测角度,从而完成跟踪帧的极化方式优选;在此基础上构建包含功率与RCS的多目标跟踪误差后验克拉美罗下界,将其作为目标函数进行优化,利用内点惩罚法求解该凸优化问题即可实现RCS高动态情况下的功率优化分配。实验结果表明:该方法可结合目标不同方向RCS动态分集特性实现功率的有效分配,相比于传统RCS模型分配方案,有效解决了分配方案与实际跟踪场景之间的失配问题,从而提升了CMIMO雷达的多目标跟踪性能。     

Controllable combustion behaviors of the laser-controlled solid propellant

Microsatellites have been widely applied in the fields of communication,remote sensing,navigation and science exploration due to its characteristics of low cost,flexible launch mode and short development period.However,conventional solid-propellant have difficulties in starting and interrupting combustion because combustion is autonomously sustained after ignition.Herein,we proposed a new type of solid-propellant named laser-controlled solid propellant,which is sensitive to laser irradiation and can be started or interrupted by switching on/off the continuous wave laser.To demonstrate the feasibility and investigate the controllable combustion behaviors under different laser on/off conditions,the combus-tion parameters including burning rate,ignition delay time and platform pressure were tested using pressure sensor,high-speed camera and thermographic camera.The results showed that the increase of laser-on or laser-off duration both will lead to the decrease of propellant combustion performance during re-ignition and re-combustion process.This is mainly attributed to the laser attenuation caused by the accumulation of combustion residue and the change of chamber ambient temperature.Simultaneously,the multiple ignition tests revealed that the increased chamber ambient temperature after combustion can make up for the energy loss of laser attenuation and expansion of chamber cavity.However,the laser-controlled combustion performance of solid propellant displayed a decrease trend with the addi-tion of ignition times.Nevertheless,the results still exhibited good laser-controlled agility of laser-controlled solid propellant and manifested its inspiring potential in many aspects of space missions.     

点火瞬态过程对复合固体推进剂力学响应特性的影响

根据一个有效的非线性粘弹模型,导出复合固体推进剂微分形式本构方程和应变速率关系式。分析表明点火瞬态过程中压强与推进剂应变、升压速率与推进剂应变速率之间呈线性关系,线性系数均为推进剂初始模量。     

高师公共课心理学的教学改革探讨

公共课心理学是体现师范特色的重要必修课,但在课程安排、教材内容、教师、教学方法和教学效果方面还存在着一些问题。针对这些问题,研究者们主要对教学体系和教材进行了改革,本文也根据教学实际提出一些具体的改革措施和建议。     

The effect of al particle size on thermal decomposition,mechanical strength and sensitivity of Al/ZrH2/PTFE composite

To study the thermal decomposition of Al/ZrH2/PTFE with different Al particle size as well as mechanical strength and impact sensitivity under medium and low strain rates, molding-vacuum sintering was adopted to prepare four groups of power materials and cylindrical specimens with different Al particle size. The active decomposition temperature of ZrH2 was obtained by TG-DSC, and the quasi-static me-chanics/reaction characteristics as well as the impact sensitivity of the specimen were studied respec-tively by quasi-static compression and drop-hammer test. The results show that the yield strength of the material decreased with the increase of the Al particle size, while the compressive strength, failure strain and toughness increased first and then decreased, which reached the maximum values of 116.61 MPa, 191％, and 119.9 MJ/m respectively when the Al particle size is 12—14μm because of particle size grading. The specimens with the highest strength and toughness formed circumferential open cracks and reacted partly when pressed. Those with developmental cracks formed inside did not react. It is considered that fracture of specimens first triggered initial reaction between Al and PTFE to release an amount of heat. Then ZrH2 was activated and decomposed, and participated in subsequent reaction to generate ZrC. The impact sensitivity of the specimens decreased with the increase of Al particle size.     

Pressure relief of underground ammunition storage under missile accidental ignition

Safety of underground ammunition storage is an important issue, especially during the accidental ignition of missiles. This work investigates the pressure and temperature distribution of the multi-layer underground ammunition storage with a pressure relief duct during the accidental ignition process of the missile. A large-scale experiment was carried out using a multi-layered restricted space with a pressure relief duct to simulate the underground ammunition store and a solid rocket motor to simulate the accidental ignition of the missile. The results show that when the motor gas mass flow increased by 5.6 times, the maximum pressure of the ammunition storage increased by 5.87 times. At a certain motor flow rate, when the pressure relief exhaust area at the end of the relief duct was reduced by 1/2, the maximum pressure on the first layer did not change. But the rate of pressure relief was reduced and the time delayed for the pressure of ammunition store to drop to zero. In this experiment, when the motor ignition position was located in to the third layer ammunition chamber, the maximum pressure was reduced by 32.9％ and also reduced the rate of change of pressure. In addition, for the experimental conditions, the theoretical analysis of the pressure relief of the ammunition storage is given by a simplified model. Based on the findings, some suggestions to the safety protection design of ammunition store are proposed.     

A melt-cast Duan-Zhang-Kim mesoscopic reaction rate model and experiment for shock initiation of melt-cast explosives

A melt-cast Duan-Zhang-Kim (DZK) mesoscopic reaction rate model is developed for the shock initiation of melt-cast explosives based on the pore collapse hot-spot ignition mechanism. A series of shock initiation experiments was performed for the Comp B melt-cast explosive to estimate effects of the loading pressure and the particle size of granular explosive component, and the mesoscopic model is validated against the experimental data. Further numerical simulations indicate that the initial density and formula proportion greatly affect the hot-spot ignition of melt-cast explosives.     

Experimental investigation on enhanced damage to fuel tanks by reactive projectiles impact

Enhanced damage to the full-filled fuel tank,impacted by the cold pressed and sintered PTFE/AL/W reactive material projectile(RMP)with a density of 7.8 g/cm3,is investigated experimentally and theoretically.The fuel tank is a rectangular structure,welded by six pieces of 2024 aluminum plate with a thickness of 6 mm,and filled with RP-3 aviation kerosene.Experimental results show that the kerosene is ignited by the RMP impact at a velocity above 1062 m/s,and a novel interior ignition phenomenon which is closely related to the rupture effect of the fuel tank is observed.However,the traditional steel projectile with the same mass and dimension requires a velocity up to 1649 m/s to ignite the kerosene.Based on the experimental results,the radial pressure field is considered to be the main reason for the shear failure of weld.For mechanism considerations,the chemical energy released by the RMP enhances the hydrodynamic ram(HRAM)effect and provides additional ignition sources inside the fuel tank,thereby enhancing both rupture and ignition effects.Moreover,to further understand the enhanced ignition effect of RMP,the reactive debris temperature inside the kerosene is analyzed theoretically.The initiated reactive debris with high temperature provides effective interior ignition sources to ignite the kerosene,resulting in the enhanced ignition of the kerosene.     

光滑物体表面反射光偏振特征分析及反射光分离技术

物体表面反射光由镜面反射光和漫反射光组成,针对光滑物体表面镜面反射光和漫反射光的分离问题,建立了一个结合镜面反射和漫反射共同作用的偏振态表征模型,并使用该模型对混合反射区域偏振特征进行分析。基于镜面反射光和漫反射光的偏振特征,根据镜面反射光和漫反射光在光滑物体表面垂直方向及平行方向上的分布关系,采用偏振正交分解的方法实现了镜面反射成分和漫反射成分的求解。利用镜面反射光图像和漫反射光图像之间的相关性,通过梯度下降算法得到镜面反射成分和漫反射成分归一化互相关最小值及其对应的镜面反射偏振度和漫反射偏振度,从而实现反射光的分离。通过对不同场景中获取的反射光图像进行测试,实验结果表明,该算法具有较好的反射光分离效果。     

Bang-Bang控制方式旋转导弹气动特性数值分析

为研究Bang-Bang控制式鸭舵对旋转导弹气动特性的影响,在CFD软件中采用嵌套网格方法模拟导弹的旋转和鸭舵的偏转,对Bang-Bang控制式旋转导弹在不同攻角、马赫数和转速下的气动特性进行了数值模拟,得到了气动特性变化规律。研究表明,因鸭舵洗流方向的改变,耦合导弹自旋会导致弹体和尾翼的侧向力发生突变。通过与不控鸭舵的旋转导弹进行对比,采用Bang-Bang控制式鸭舵的旋转导弹的周期平均侧向力系数变小,周期平均法向力系数变大。由于侧向力的存在,导弹在一个周期内的合力会偏离竖直方向,合力偏离竖直方向的角度随着马赫数、自旋速率和攻角的增大而减小。