空间信息支持高能激光武器应用研究*

依据空间信息支持现代作战的主要内容,介绍了五大类空间信息状况,分析了新概念武器高能激光的基本原理,并就其应用过程建立了UML模型。在此基础上,设计了空间信息支持高能激光武器应用系统的框架,并就高能激光武器对空间信息的需求进行了重点分析,而后以信息的转换与传递为主线,探讨了高能激光武器运用空间信息的流程。最后对该领域研究的趋势和发展前景做出了展望,并提出对其未来发展的要求。     

一种基于滑模变结构观测器的故障检测方法

提出一种基于滑模变结构观测器的残差生成及故障检测方法.利用滑模变结构所具有的对未知输入扰动的不变性,移除外界扰动对残差的影响,使残差只对故障信号敏感,从而提高故障检测的准确性,较好地解决基于状态估计的故障检测方法中检测鲁棒性与灵敏度之间的矛盾.仿真验证结果表明了该故障检测方法有较高的检测鲁棒性,同时对小幅值故障较为灵敏.     

舰船主动力装置故障隔离与参数估计方法

针对舰船主动力装置结构复杂、故障种类多和系统不确定性等故障诊断问题，提出采用基于双因果键合图模型的定量故障隔离与参数估计方法。根据系统传感器配置方案，建立双因果键合图模型，通过因果路径分析，推导得到系统解析冗余关系，并获得故障特征矩阵。建立系统线性分式变换键合图模型，开展故障仿真，将其与双因果键合图模型耦合，在MATLAB/Simulink环境中进行仿真试验，实现了舰船主动力装置的故障隔离与参数估计。结果表明：对双因果键合图模型因果路径分析，可以避免手动推导系统解析冗余关系的繁杂过程；基于其部件构造方程的分析可以有效实现系统故障隔离与参数估计，实时跟踪和预测故障状态。     

基于部分可辨识振动系统的载荷恢复方法

在复模态分析和参数辨识的基础上,对部分可辨识振动系统的载荷识别问题进行了研究,提出了基于部分可辨识复模态参数的载荷恢复方法。恢复模型存在幅值模糊和相位模糊,不存在排列模糊。数值仿真验证了该方法的有效性,并讨论了提高恢复精度的方法。     

Experimental study on explosion dispersion process of a multi-layer composite charge under different initiation modes

The influence of initiation modes on the explosive dispersion process of the multi-layer composite charge (MCC) was studied. Overpressure sensors and high-speed photography system were used to investigate the energy release process of an MCC with a specific structure. The shock wave pressure and explosive dispersion characteristics of the MCC under different initiation modes were compared. The forming and expanding process of the shock wave of the composite charge under different initiation modes was determined. The separation position of the shock wave and fireball interface was determined. The calculation formulas of the shock radius and overpressure of the composite charge are presented. The radius of the shock wave of the composite charge was significantly affected by the initiation mode. Moreover, the development process of the composite explosive fireball under different initiation modes was analyzed, the variation rules of the composite charge dispersion radius and fireball dispersion velocity with time were obtained under the different initiation modes, the explosion energy release rate of composite charge under simultaneous initiation modes was the highest, and the peak overpressure under the simultaneous initiation mode was 1.61 times that of central single-point initiation.     

A novel noise reduction technique for underwater acoustic signals based on complete ensemble empirical mode decomposition with adaptive noise,minimum mean square variance criterion and least mean square adaptive filter

Underwater acoustic signal processing is one of the research hotspots in underwater acoustics. Noise reduction of underwater acoustic signals is the key to underwater acoustic signal processing. Owing to the complexity of marine environment and the particularity of underwater acoustic channel, noise reduction of underwater acoustic signals has always been a difficult challenge in the field of underwater acoustic signal processing. In order to solve the dilemma, we proposed a novel noise reduction technique for underwater acoustic signals based on complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN), minimum mean square variance criterion (MMSVC) and least mean square adaptive filter (LMSAF). This noise reduction technique, named CEEMDAN-MMSVC-LMSAF, has three main advantages: (i) as an improved algorithm of empirical mode decomposition (EMD) and ensemble EMD (EEMD), CEEMDAN can better suppress mode mixing, and can avoid selecting the number of decomposition in variational mode decomposition (VMD); (ii) MMSVC can identify noisy intrinsic mode function (IMF), and can avoid selecting thresholds of different permutation entropies; (iii) for noise reduction of noisy IMFs, LMSAF overcomes the selection of decomposition number and basis function for wavelet noise reduction. Firstly, CEEMDAN decomposes the original signal into IMFs, which can be divided into noisy IMFs and real IMFs. Then, MMSVC and LMSAF are used to detect identify noisy IMFs and remove noise components from noisy IMFs. Finally, both denoised noisy IMFs and real IMFs are reconstructed and the final denoised signal is obtained. Compared with other noise reduction techniques, the validity of CEEMDAN-MMSVC-LMSAF can be proved by the analysis of simulation signals and real underwater acoustic signals, which has the better noise reduction effect and has practical application value. CEEMDAN-MMSVC-LMSAF also provides a reliable basis for the detection, feature extraction, classification and recognition of underwater acoustic signals.     

地铁火灾应急预案的制定

介绍地铁火灾发生时的几个主要的特点以及其巨大的危害性,引出了地铁火灾应急预案制定模式的重要性。通过对已有的资料进行研究、分析,同时结合实际,对地铁火灾应急预案制定时所包含的主要内容进行了科学的完善,得出了一个完整的预案制定模式。     

混合隔振系统中电磁作动器的优化设计

由于混合隔振系统中的电磁作动器对电磁力、体积重量、损耗等指标有着严格的限制,因此电磁作动器的优化设计显得十分重要。为此,提出了电磁作动器系统参数(包括几何尺寸参数和电参数)的优化设计方法,推导了电磁作动器总损耗与系统参数间的关系。通过有限元分析软件ANSYS中的优化设计模块,使用ANSYS参数化设计语言建立了在保证电磁力及体积限制条件下,以总损耗最小为目标函数的三维参数化分析模型,多次循环迭代求解后得到了较为优化的系统参数。仿真及实验结果表明:按照该方法设计的电磁作动器能够满足各项设计指标要求,且性能比其他参数下更为优化。     

电磁脉冲武器对抗来袭目标可行性研究

针对电磁脉冲武器独特的毁伤机理,计算了杀伤覆盖区域和辐射到目标处的功率密度等作战能力指标,并以反舰导弹为例分析了强电磁脉冲的耦合途径,通过评估前后门耦合的电磁能量,在理论上论证了用电磁脉冲武器对抗来袭目标的可行性.     

舰艇作战系统工作模式及其作战对策分析*

探讨了基于敌情事件触发的舰艇作战系统工作模式及其作战对策。根据舰艇的内外部需求,依据传感器系统与武器系统所处的状态,提出了舰艇作战系统的五种工作模式。并研究了在敌情事件触发下,如何根据舰艇所处的工作模式,迅速做出相应的作战对策,给出各种模式下的模式转换流程。这种作战对策可使作战过程自动化、信息传输扁平化,从而提高舰艇在紧急状况下的反应速度。