基于ANP的装备保障转型影响因素分析

针对装备保障转型影响因素众多、转型重要程度难以确定等问题,分析了保障转型外部和内部影响因素,建立了保障转型影响因素ANP模型,利用ANP方法对装备保障转型影响因素进行了权重确定,为确定装备保障转型影响因素重要性程度提供了一种定量化分析方法,明确了装备保障转型应优先重点解决的关键问题．     

基于时滞分割法的具有leakage项时滞的离散型神经网络状态估计

摘要：研究一类具有leakage时滞的离散型神经网络的状态估计问题．通过构造新的Lyapunov泛函得到保证估计误差全局渐近稳定的充分条件,并通过求解一个线性矩阵不等式（LMI）得到状态估计器的增益矩阵．采用一种新的时滞分割方法将变时滞区间分割为多个子区间,使该结果在获得更小的保守性同时也降低了计算的复杂度．     

基于GDOP的多基地雷达布站优化研究

以BLUE算法和GDOP为基本定位算法和精度分析工具,评估多基地雷达的定位性能,建立以GDOP最小值最小和有效监控区最大为目标的多基地雷达布站优化模型.仿真结果表明,通过以下措施可提高定位性能:①增加收发站总数;②采取扇形方式布站;③优先增加部署接收站;④交替部署收发站;⑤通过优化模型优化扇形布站分布角总和.     

Formation of adiabatic shearing band for high-strength Ti-5553 alloy: A dramatic thermoplastic microstructural evolution

By using split Hopkinson pressure bar, optical microscopy and electronic microscopy, we investigate the influence of initial microstructures on the adiabatic shear behavior of high-strength Ti–5Al–5V–5Mo–3Cr (Ti-5553) alloy with lamellar microstructure and bimodal microstructure. Lamellar alloy tends to form adiabatic shearing band (ASB) at low compression strain, while bimodal alloy is considerably ASB-resistant. Comparing with the initial microstructure of Ti-5553 alloy, we find that the microstructure of the ASB changes dramatically. Adiabatic shear of lamellar Ti-5553 alloy not only results in the formation of recrystallized β nano-grains within the ASB, but also leads to the chemical redistribution of the alloying elements such as Al, V, Cr and Mo. As a result, the alloying elements distribute evenly in the ASB. In contrast, the dramatic adiabatic shear of bimodal alloy might give rise to the complete lamination of the globular primary α grain and the equiaxial prior β grain, which is accompanied by the dynamic recrystallization of α lamellae and β lamellae. As a result, ASB of bimodal alloy is composed of α/β nano-multilayers. Chemical redistribution does not occur in ASB of bimodal alloy. Bimodal Ti-5553 alloy should be a promising candidate for high performance armors with high mass efficiency due to the processes high dynamic flow stress and excellent ASB-resistance.     

链约束下加工时间恶化的Flow Shop排序问题

讨论作业具有线性加工时间,作业间具有链约束的两台处理机流水作业排序问题,目标函数为极小化完工时间。在作业加工时间简单线性恶化下,提出作业的非负开始和停止延迟恶化率,构造了满足约束条件的复合作业。在此基础上,给出作业间具有平行链约束的两台处理机流水作业排序问题的最优多项式算法。     

联合作战系统效能评估

采用面向过程的系统分析方法建立了一个对联合作战系统效能比较精确的量化评估模型.模型以某个参考系统为标准,先作层次分析,然后通过模糊对比,把各层次中难以具体量化因素进行了量化,再通过判断矩阵得出各自权重,最后线性加权便可以得到总的系统相对于标准系统的优劣程度,是一种面向过程的系统分析.该方法适用面广,对复杂系统效能评估工作有一定指导意义,具有广阔的应用前景.     

转向机动条件下利用拖船航迹的拖线阵阵形估计

针对水动力模型(water-pulley模型)适用范围有限的问题,提出一种对拖船航迹进行平滑得到拖线阵声阵段运动轨迹,进而实现阵形估计的方法。通过分析缆的稳态振荡响应特性,近似认为声阵段上各点沿同一轨迹运动;设计平滑窗将拖船回转机动航迹平滑为声阵段航迹,并将其拓展应用于拖船转向机动的情况;利用平滑窗的一部分对距离拖船不足平滑窗宽度的航迹部分进行平滑得到当前拖缆段阵形,从而实现转向机动过程中全阵阵形的实时估计。仿真结果表明:若拖线阵由间隔为5 m的81个阵元构成,所提出的方法与朴素water-pulley模型相比可以使转向机动过程中的平均阵增益提高约0.8 dB,平均方位估计偏差减小约4.7°。利用仿真结果分析算法的输入敏感性,对阵形估计方法进行简化使其更易于工程实现,海试数据验证表明简化的方法可行、有效。     

Adjacency‐based local top‐down search method for finding maximal efficient faces in multiple objective linear programming

It is well‐known that the efficient set of a multiobjective linear programming (MOLP) problem can be represented as a union of the maximal efficient faces of the feasible region. In this paper, we propose a method for finding all maximal efficient faces for an MOLP. The new method is based on a condition that all efficient vertices (short for the efficient extreme points and rays) for the MOLP have been found and it relies on the adjacency, affine independence and convexity results of efficient sets. The method uses a local top‐down search strategy to determine maximal efficient faces incident to every efficient vertex for finding maximal efficient faces of an MOLP problem. To our knowledge, the proposed method is the first top‐down search method that uses the adjacency property of the efficient set to find all maximal efficient faces. We discuss this and other advantages and disadvantages of the algorithm. We also discuss some computational experience we have had with our computer code for implementing the algorithm. This computational experience involved solving several MOLP problems with the code.     

陆军装备技术保障能力建设转型研究

陆军装备技术保障能力建设呈现"四个转变"的新形势、新要求,实现转型发展面临"四个不相适应"的现实矛盾,需从更新抓建理念、完善标准体系、固化建设路径、优化运行机制四个方面着手,统筹规划,重点突破,积极稳妥推进陆军装备技术保障能力转型发展。     

电磁发射用分段供电六相圆筒式直线感应电动机数学模型

为研究新型分段供电六相圆筒式直线感应电动机的运行规律,针对其不对称运行的特点,采用磁动势理论推导了气隙中与空间位置无关的脉振磁场的电感矩阵表达式,通过将其引入abc坐标系下对称的电机数学模型,从而构建了描述六相圆筒式直线感应电机不对称的数学模型。在Simulink环境下,采用隐式梯形法构建了该不对称模型的系统仿真模型。最后,对样机进行了仿真分析和实验验证,仿真结果与实验数据吻合良好,验证了模型的正确性。