DIS系统中实时通讯技术的研究

针对DIS系统实时通讯的要求 ,以UDP通讯协议为基础 ,结合采用多线程技术 ,给出了一种实时通讯方法 .经模拟试验表明该方法在WindowsNT环境下是有效的 .     

Estimating failure time distribution and its parameters based on intermediate data from a Wiener degradation model

Instead of measuring a Wiener degradation or performance process at predetermined time points to track degradation or performance of a product for estimating its lifetime, we propose to obtain the first‐passage times of the process over certain nonfailure thresholds. Based on only these intermediate data, we obtain the uniformly minimum variance unbiased estimator and uniformly most accurate confidence interval for the mean lifetime. For estimating the lifetime distribution function, we propose a modified maximum likelihood estimator and a new estimator and prove that, by increasing the sample size of the intermediate data, these estimators and the above‐mentioned estimator of the mean lifetime can achieve the same levels of accuracy as the estimators assuming one has failure times. Thus, our method of using only intermediate data is useful for highly reliable products when their failure times are difficult to obtain. Furthermore, we show that the proposed new estimator of the lifetime distribution function is more accurate than the standard and modified maximum likelihood estimators. We also obtain approximate confidence intervals for the lifetime distribution function and its percentiles. Finally, we use light‐emitting diodes as an example to illustrate our method and demonstrate how to validate the Wiener assumption during the testing. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

The building evacuation problem with shared information

In this article, the Building Evacuation Problem with Shared Information (BEPSI) is formulated as a mixed integer linear program, where the objective is to determine the set of routes along which to send evacuees (supply) from multiple locations throughout a building (sources) to the exits (sinks) such that the total time until all evacuees reach the exits is minimized. The formulation explicitly incorporates the constraints of shared information in providing online instructions to evacuees, ensuring that evacuees departing from an intermediate or source location at a mutual point in time receive common instructions. Arc travel time and capacity, as well as supply at the nodes, are permitted to vary with time and capacity is assumed to be recaptured over time. The BEPSI is shown to be NP‐hard. An exact technique based on Benders decomposition is proposed for its solution. Computational results from numerical experiments on a real‐world network representing a four‐story building are given. Results of experiments employing Benders cuts generated in solving a given problem instance as initial cuts in addressing an updated problem instance are also provided. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

一种改进方位向非线性CS大斜视角SAR成像算法

大斜视角SAR成像时存在严重的距离走动现象,慢时域的距离走动校正在解决这一问题同时导致了聚焦深度问题.分析了二维频域解耦合后残余相位误差以及时域走动校正后的多普勒调频率误差,提出一种改进的方位向非线性CS算法,校正了三次以上距离迁徙带来的相位误差,同时采用改进非线性CS扰动方程补偿了随方位偏移量线性变化的调频率误差.仿真结果表明,改进算法的大斜视角大场景成像性能优于传统的高分辨大斜视角成像算法.     

铝导线短路熔珠对固体可燃物引燃能力实验研究

在模拟试验平台上进行了铝导线短路熔珠引燃棉布、聚氨酯泡沫塑料和纸张的试验,得到了不同材料的临界加栽电压值和引燃规律。初步分析了加栽电压与短路熔珠粒径及引燃能力的关系。结果表明,随着短路电压增大,导线熔珠的粒径逐渐增大,熔珠对固体材料的引燃能力逐渐增强,氧指数越低、表面粗糙、易蓄热的材料越容易被点燃。棉布、聚氨酯泡沫塑料和纸屑被引燃的短路临界电压分别为50V、35V和45V。     

第Ⅳ类时滞捕食系统的Hopf分支

研究了具有第Ⅳ类功能性反应的两种群时滞捕食系统正平衡点的稳定性,讨论了该系统的Hopf分支现象,并进行了数值模拟。     

电子时间引信检测仿真试验研究

为提高电子时间引信的检测能力,介绍了电子时间引信检测仿真试验,分析了仿真试验的原理,给出了检测仿真试验的试验方法。经实际检测表明,该检测仿真试验能够安全可靠地完成电子时间引信的日常检测任务。     

发动机配气机构振动信号时域分析

对康明斯6BT5.9型柴油发动机配气机构产生的振动信号进行了时域分析,采用振动加速度峰峰值作为判定发动机配气机构技术状态的特征量,并采用多通道信息融合技术实现配气机构的故障诊断。     

基于时间外推的目标跟踪解析算法及其改进*

为了解决解析算法在解算过程中存在的多解问题,提出一种解的确定方法,通过预测传感器发现目标的时间,给出一种时间递进的解的确定过程。最后,借助于Repast仿真平台,对算法进行了仿真,表明解析算法与线性拟和算法相比,具有更好的精度。     

SDL系统与VxWorks集成中的关键技术

SDL是一种规格与描述性语言,非常适合信令与协议软件开发。VxWorks作为一个具有较高性能的、标准的嵌入式系统,在世界各地受到广泛应用。论文对在两者结合过程中所涉及的一些关键技术,如代码生成、集成方式选择、与操作系统接口以及与环境接口等进行了研究。