热气溶胶灭火装置安全隐患探讨

针对目前市场上热气溶胶灭火装置＂爆炸＂及存在安全隐患,阐述了其发生原理,并提出了热气溶胶灭火装置应严格控制的一些安全性能指标和结构方式。     

外卡压力传感器的卡持结构设计与分析

针对外卡压力传感器存在的测试信号重复性差、信噪比低、安装局限性大的问题,设计了一种新型卡持结构——人字形结构,并从理论上分析了该结构相对于＂匚＂形夹块和环形夹块的优势。实验数据表明：采用人字形卡持结构的外卡压力传感器具有测试可靠、信噪比高、通用性好的特点。     

基于北斗短报文的远海实时精密单点定位

针对远海精密导航与定位费用高昂的问题,提出利用北斗短报文传输多模全球导航卫星系统的实时服务数据,实现远海实时精密单点定位。为了降低通信成本和硬件成本,本研究对实时服务数据进行简化,弥补了北斗短报文带宽的不足;为了克服北斗短报文频率低的缺点,采取了实时精密星历预报的方法,来获取分钟间隔以外时刻的卫星轨道位置和钟差改正。对基于北斗短报文的远海实时精密单点定位的数据处理过程进行了仿真模拟。后期处理实测海洋观测数据,对定位性能进行测试,可实现水平方向厘米级定位,竖直方向精度为10~20 cm。该方法为低成本的远海实时定位提供了技术参考。     

Effects of total pressures and equivalence ratios on kerosene/air rotating detonation engines using a paralleling CE/SE method

In this paper, the kerosene/air rotating detonation engines(RDE) are numerically investigated, and the emphasis is laid on the effects of total pressures and equivalence ratios on the operation characteristics of RDE including the initiation, instabilities, and propulsive performance. A hybrid MPI + OpenMP parallel computing model is applied and it is proved to be able to obtain a more effective parallel performance on high performance computing(HPC) systems. A series of cases with the total pressure of 1 MPa, 1.5 MPa, 2 MPa, and the equivalence ratio of 0.9, 1, 1.4 are simulated. On one hand, the total pressure shows a significant impact on the instabilities of rotating detonation waves. The instability phenomenon is observed in cases with low total pressure (1 MPa) and weakened with the increase of the total pressure. The total pressure has a small impact on the detonation wave velocity and the specific impulse. On the other hand, the equivalence ratio shows a negligible influence on the instabilities, while it affects the ignition process and accounts for the detonation velocity deficit. It is more difficult to initiate rotating detonation waves directly in the lean fuel operation condition. Little difference was observed in the thrust with different equivalence ratios of 0.9, 1, and 1.4. The highest specific impulse was obtained in the lean fuel cases, which is around 2700 s. The findings could provide insights into the understanding of the operation characteristics of kerosene/air RDE.     

Hazard evaluation of ignition sensitivity and explosion severity for three typical MH2 (M＝Mg,Ti, Zr) of energetic materials

MgH2, TiH2, and ZrH2 are three typical metal hydrides that have been gradually applied to composite explosives and propellants as additives in recent years. To evaluate ignition sensitivity and explosion severity, the Hartmann device and spherical pressure vessel were used to test ignition energy and ex-plosion pressure, respectively. The results showed that the ignition sensitivity of ZrH2, TiH2 and MgH2 gradually increased. When the concentration of MgH2 is 83.0 g/m3 in Hartmann device, the ignition energy attained a minimum of 10.0 mJ. The explosion pressure of MgH2 were 1.44 times and 1.76 times that of TiH2 and ZrH2, respectively, and the explosion pressure rising rate were 3.97 times and 9.96 times that of TiH2 and ZrH2, respectively, through the spherical pressure vessel. It indicated that the reaction reactivity and reaction rate of MgH2 were higher than that of TiH2 and ZrH2. In addition, to conduct in-depth theoretical analysis of ignition sensitivity and explosion severity, gas production and combus-tion heat per unit mass of ZrH2, TiH2 and MgH2 were tested by mercury manometer and oxygen bomb calorimetry. The experimental results revealed that MgH2 had a relatively high gas production per unit mass (5.15 mL/g), while TiH2 and ZrH2 both had a gas production of less than 2.0 mL/g. Their thermal stability gradually increased, leading to a gradual increase in ignition energy. Furthermore, compared with theoretical combustion heat, the combustion ratio of MgH2, TiH2 and ZrH2 was more than 96.0%, with combustion heat value of 29.96, 20.94 and 12.22 MJ/kg, respectively, which was consistent with the explosion pressure and explosion severity test results.     

基于马尔可夫预测的低消耗弹药库存仿真建模分析

应用马尔可夫方法的无后效性原理,建立了低消耗弹药库存的预测模型,为该类弹药的年度供应提供依据。在模型建立的基础上,对其仿真算法进行了描述,并应用计算机进行了仿真实现。     

发动机缸内压缩压力非接触式检测方法研究

发动机汽缸压缩压力是检测发动机机密封性的重要参数.发动机密封性降低,会造成发动机经济性、动力性下降及废气排放指标恶化,因此对各缸压缩压力的检测具有重要意义.现提出一种利用曲轴瞬时转速,进行不解体检测坦克发动机汽缸压缩压力的方法.通过实车测量获得缸压及转速的特征参数,利用灰色理论模型的方法建立了发动机转速脉动与汽缸压缩压力的数学关系.试验结果表明,利用这种方法进行缸内压缩压力测量是可行的.     

船用三层组合外套液压联轴器最优分层分析

液压联轴器外套采用多层筒组合式外套可提高液压联轴器的弹性极限承载能力.文中对液压联轴器不同材料双层组合式外套和同种材料3层组合式外套进行了分析,确定了双层和3层外套分层界面的最佳半径.结果表明,3层外套的弹性极限承载能力比单层外套的弹性极限承载能力提高了31.4%;3层外套的弹性极限承载能力比双层外套的弹性极限承载能力提高了7.4%.     

基于直接数据域自适应算法的相干信号DOA估计

利用直接数据域自适应算法的稳态权值代替噪声子空间构建空间谱,构造了一种超分辨波达方向(DOA)估计方法.为了解决谱峰搜索时的伪峰问题,采用参考阵元轮换得到多组线性无关稳态权值,逼近噪声子空间,能有效去除伪峰.针对相干信号的DOA估计,进一步提出了直接数据域取对称共轭向量的解相干方法.相比子空间分解类算法,本文算法不需估计信号源数目和协方差矩阵、不需特征分解,复杂度仅为O(MP),同时能有效完成解相干处理.     

基于RCS的三维低可探测性轨迹优化方法

针对基于雷达散射截面(RCS)规避雷达威胁的飞行轨迹优化问题,提出了低可探测性三维轨迹优化的求解方法.通过B样条拟合构建连续可微的RCS数据模型,结合三维飞行动力学模型,建立规避雷达威胁下的飞行运动控制模型.将轨迹优化问题描述成为最优控制问题,其中飞行姿态控制、轨迹约束、边界条件作为约束条件,以降低雷达探测概率和减少飞行时间为目标函数.运用高斯伪谱法( GPM)将连续的最优控制问题转换为离散的非线性规划问题进行求解.仿真结果证明本文方法实现了求解单基地雷达和双基地雷达探测环境中低可探测性三维轨迹优化问题,有效降低了飞行过程中的雷达探测概率和暴露时间.