基于动力学仿真的6×6轮式越野车辆总体性能评价

为分析和评价某型6×6轮式越野车辆的总体设计性能,建立了整车多刚体动力学模型、刚柔耦合动力学模型以及悬架系统台架试验模型,计算了整车固有特性,依次进行了悬架系统运动学、行驶动力学、操纵稳定性分析。在计算车体和悬架摆臂结构模态的基础上,考核了典型行驶工况下车体和悬架部件结构的动态强度,依据国家相关标准,利用仿真结果对6×6整车设计进行了系统的评价,指出了该越野车总体设计性能的不足,为其进一步改进和优化设计提供了参考依据。研究方法对其他轮式越野车辆系统的设计和评价具有一定的参考价值。     

机械结构动力学模型修正技术的现状与发展

在回顾结构动力学模型修正基本问题及关键技术的同时,论述模型修正在工程领域的结构动力修改、混合建模、模型确认、载荷识别、结构状态监测及损伤评估等方面的典型应用状况。针对模型修正技术在工程应用方面遇到的困难,还探讨了当前结构模型修正的研究热点以及模型修正技术的发展趋势。     

轮式越野车动力学建模及行驶动力学特性仿真

为准确评估某型6×6轮式越野车行驶动力学性能,建立了该越野车的整车多刚体动力学模型,分析了模型的振动固有特性和频率响应特性,并进行了特定工况下的行驶动力学特性仿真,计算了悬架动行程均方根值和车轮动载荷均方根值,分析了悬架与限位块的碰撞概率和车轮跳离地面的概率。结果表明:该动态工况下越野车的悬架设计工作空间满足使用要求,但行驶安全性能较差。     

Adaptive control of track tension estimation using radial basis function neural network

Track tension is a major factor influencing the reliability of a track. In order to reduce the risk of track peel-off, it is necessary to keep track tension constant. However, it is difficult to measure the dynamic tension during off-road operation. Based on the analysis of the relation and external forces depending on free body diagrams of the idler, idler arm, road wheel and road arm, a theoretical estimation model of track tension is built. Comparing estimation results with multibody dynamics simulation results, the rationality of track tension monitor is validated. By the aid of this monitor, a track tension control system is designed, which includes a self-tuning proportional-integral-derivative (PID) controller based on radial basis function neural network, an electro-hydraulic servo system and an idler arm. The tightness of track can be adjusted by turning the idler arm. Simulation results of the vehicle starting process indicate that the controller can reach different expected tensions quickly and accurately. Compared with a traditional PID controller, the proposed controller has a stronger anti-disturbance ability by amending control pa-rameters online.     

Simulation on the dynamic stability derivatives of battle-structure-damaged aircrafts

Accurately evaluating the aerodynamic performance of a battle-structure-damaged aircraft is essential to enable the pilot to optimize the flight control strategy. Based on CFD and rigid dynamic mesh techniques, a numerical method is developed to calculate the longitudinal and longitudinal-lateral coupling forces and moments with small amplitude sinusoidal pitch oscillation, and the corresponding dynamic de-rivatives of two fragment-structure-damaged and two continuous-rod-damaged models modified from the SACCON UAV. The results indicate that, at the reference point set in this paper, additional positive damping is generated in fragment-damaged configurations; thus, the absolute values of the negative pitch dynamic derivative increase. The missing wingtip induces negative pitch damping on the aircraft and decreases the value of the pitch dynamic derivative. The missing middle wing causes a noticeable increase in the absolute value of the pitch dynamic derivative;the missing parts on the right wing cause the aircraft to roll to the right side in the dynamic process, and the pitch-roll coupling cross dynamic derivatives are positive. Moreover, the values of these derivatives increase as the damaged area on the right wing increases, and an optimal case with the smallest cross dynamic derivative can be found to help improve the survivability of damaged aircraft.     

角度欺骗有源假目标的动力学特性

针对高空高速目标探测过程中可能出现的角度类欺骗有源假目标,从理论上系统地分析了其动力学性质,导出了假目标的动力学方程,并分析了假目标的机械能和动量矩守恒问题。理论分析和仿真试验均表明,具有固定角度欺骗的方位有源假目标其动力学特性和真实目标完全一致,在动力学上是无法鉴别真伪的;除此之外的其他角度类欺骗有源假目标均不满足高空高速目标椭圆轨道特性以及动力学守恒定律,利用这种差异可以在数据处理层对假目标进行鉴别。     

高超声速流动计算中LU-SGS隐式算法的应用研究

在高超声速条件下,对原始LU-SGS格式及其改进方法的收敛速度做了深入地比较分析,目的是进一步更好地将LU-SGS算法用于工程上复杂外形的计算模拟当中。二维圆柱,三维钝锥及空天飞机算例的结果表明：(i)对于高超声速粘性流动的计算,粘性项应进行隐式处理;(ii)BLU-SGS方法给出的内迭代方式的收敛性优于DP-LUR方法所给出的内迭代方式;(iii)LU-SGS算法中雅克比系数矩阵的计算方式对计算量及收敛性影响较大,若采用精确的矩阵形式则在流动无分离情况下能取得快速收敛的效果,而在含有流动分离的情况因受稳定性的影响精确的矩阵形式的收敛表现不及对角近似形式。     

约束层阻尼板动力学问题的传递函数解

采用传递函数方法对约束层阻尼板进行了动力学分析.使用Hamilton原理得到了约束层阻尼板的运动方程和边界条件,对未知位移进行级数展开,引入状态向量,使用分布参数传递函数方法建立系统的状态空间方程进行求解,分析了四边简支板的自由振动和频率响应问题,得到了板的固有频率、损耗因子和频响曲线.算例的计算结果与NASrRAN计算结果相比吻合良好.     

基于雷达动力学误差的战斗机综合引导方法

针对战斗机雷达跟踪目标中断导致引导失效的问题,提出一种基于动力学误差的综合引导方法。首先给出雷达测角装置的动力学结构模型,建立了动力学误差传递函数,分析了导致角度跟踪中断的因素;然后建立综合引导法的运动学模型,提出雷达惯性不可逃逸距离的概念和雷达开机时间的计算方法;最后对综合引导法和最佳前置法进行对比仿真,验证了方法的可行性。     

复杂外形导弹出水过程空化流数值计算研究

基于Zwart-Gerber-Belamri空化模型,采用动网格和复合网格技术,提出了一种复杂外形潜射导弹出水过程中空化流数值计算方法。对头肩部、舵面及突起物的空化生成、演化及影响因素进行了分析。结果表明,出水过程初期空化数降低使附体空泡迅速扩大,随后空泡脱落与振荡的影响将更为显著；肩部在15m/s出水时产生空化并随速度上升而迅速增长, - 攻角时肩空化非对称性显现；舵面空化受出水速度影响较小, 攻角以下时空化面积小于全舵面积的10%,但攻角超过 后空化面积迅速增长至50%以上；减小突起物尺寸有利于避免空化产生,突起物空化受攻角影响较小,但在高速下可诱导临近弹体产生空化。